bahamuthx Posted March 11, 2014 Report Share Posted March 11, 2014 Hi Guys, I just received QC picture of Diver, thought to share it! Let me know what do you guys think. Appreciate you comments! My first order on pure time, and I have to say that their service is exceptional! Cheers Link to comment Share on other sites More sharing options...
fradic Posted March 11, 2014 Report Share Posted March 11, 2014 Wow, that is one beautiful piece. Link to comment Share on other sites More sharing options...
mjmj Posted March 11, 2014 Report Share Posted March 11, 2014 The bezel screws are not properly aligned. Link to comment Share on other sites More sharing options...
docthor Posted March 11, 2014 Report Share Posted March 11, 2014 Looks like the date is a tad high too... Link to comment Share on other sites More sharing options...
folex Posted March 11, 2014 Report Share Posted March 11, 2014 If hes happy with it and alrdy accepted the qc, then jts good;) Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Nightwatch Posted March 12, 2014 Report Share Posted March 12, 2014 Hi, Yes and yes but whatsoever slightly. Would You really reject specifically this watch and risk getting a worse one? The OP has just 6 posts and prob. 1st watch. I wouldn´t take the risk and accept it, because the next will have a different and worse flaw, than the TD tells to go buy a gen and sends the money back - no watch at all, nothing lost but time that's true. Just interested in knowing how You proceed. Thanks Link to comment Share on other sites More sharing options...
Legend Posted March 12, 2014 Report Share Posted March 12, 2014 To me, this is a very reasonable first rep. Yes the bezel screws are not perfectly aligned, but I have seen at least 2 gens with the same issue! This is, afterall, a mid-range rep.. I would accept it if I was the buyer, knowing the flaws and all. They are not egregious defects, and trust me when I tell you that on the wrist, a lot of replica watches look darned good, flaws and all. Link to comment Share on other sites More sharing options...
bahamuthx Posted March 12, 2014 Author Report Share Posted March 12, 2014 Thanks guys for the comments and input, yes this is actually my first watch. So I did ask to replace the watch since there is somekind of excess in the crown at 3 o clock. They send me another QC, which i thought looks better than the first! let me know what do you guys think. I understand this is not gen, and there will always be a flaw Link to comment Share on other sites More sharing options...
Legend Posted March 12, 2014 Report Share Posted March 12, 2014 Thanks guys for the comments and input, yes this is actually my first watch. So I did ask to replace the watch since there is somekind of excess in the crown at 3 o clock. They send me another QC, which i thought looks better than the first! let me know what do you guys think. I understand this is not gen, and there will always be a flaw The bezel screws are not aligned for this one, but as I said, so were the ones on 2 of the gens I saw. Its a nice watch, and if you could accept the first, then I would tell you to go ahead to accept this one. Alvin Link to comment Share on other sites More sharing options...
markiemark Posted March 12, 2014 Report Share Posted March 12, 2014 I wish they made a rep xs rubber strap, no TD here is willing to help me without serial# Link to comment Share on other sites More sharing options...
bahamuthx Posted March 12, 2014 Author Report Share Posted March 12, 2014 The bezel screws are not aligned for this one, but as I said, so were the ones on 2 of the gens I saw. Its a nice watch, and if you could accept the first, then I would tell you to go ahead to accept this one. Alvin Thanks for your suggestion! yes I am going to accept the second QC watch . Do you also know if I can aligned slightly the bezel screws just by turning them from top? or do I have to disassemble it first? Thanks beforehand Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now