Phong bezel assembly on Cartel 1665?

[slay]

Hi,

can anyone tell me whether the phong 1665 bezel assembly fits on the Cartel 1665 cases? Phong told me they fit on 'genuine rolex cases', but I was hoping I can also use a Cartel case (1500$ for his case set is definitely too steep for me). Thanks

[slay]

I'm talking about a DRSD, not explorer, fyi

[freddy333]

Until/unless a member who has actually mated the 2 together jumps in, you might fare better by asking the seller of your case if it is made to OEM specs. Still, from my experience, due to the lack of QC & variability of most rep makers, regardless of anyone's experience or what a seller tells you, the reality is that until you try it with your case, there is no way to be 100% certain either way.

[Nanuq]

If you're really set on going the Phong route, try contacting JMB.  He has mad skillz in machining crystal retaining rings and I bet he could make something to mate the Phong to the Cartel.

 

As long as there's a rehaut neck on the case, and a crystal to fit snugly over it, I think there's hope.

[jackflash]

Phong bezel and Cartel case is exactly the combo I have. All I needed to do was shave the crystal wall thickness slightly until the retaining ring fitted snuggly.

[slay]

If you're really set on going the Phong route, try contacting JMB.  He has mad skillz in machining crystal retaining rings and I bet he could make something to mate the Phong to the Cartel.

 

As long as there's a rehaut neck on the case, and a crystal to fit snugly over it, I think there's hope.

 

Good to know in case I run into any troubles

 

Phong bezel and Cartel case is exactly the combo I have. All I needed to do was shave the crystal wall thickness slightly until the retaining ring fitted snuggly.

 

Thanks again for the help, I'll do it the same way you did

Edited March 28, 2015 by slay

[slay]

edit: resolved

Edited March 30, 2015 by slay

[JoeyB]

As long as there's a rehaut neck on the case, and a crystal to fit snugly over it, I think there's hope.

The 'rehaut neck' on the case is necessary to be a gen style crystal mount. If the case has that, then it is a matter of the crystal. The bezel retaining ring is pressed onto the crystal. The ring only seats at the case. The bezel attaches to the retaining ring, not to the case. The bezel will seat wherever the retainer seats.