themannier Posted August 29, 2015 Report Share Posted August 29, 2015 Hi mates !I know that it's better to use a double tape adhesive for a ceramic insert, because with some glue, hypo cement for example, you won't get the perfect height inside the bezel.Do you know what kind of 3M double tape do they use at the NOOB factory to stick a ceramic insert ?I thought this one could be fine maybe .....http://www.ebay.com/itm/3M-300LSE-467MP-DOUBLE-SIDED-INDUSTRIAL-ADHESIVE-TAPE-CRAFTS-CARDS-LCD-DIGITIZER-/181832110704?hash=item2a5609d270Thanks in advance ! Link to comment Share on other sites More sharing options...
PeteM Posted August 29, 2015 Report Share Posted August 29, 2015 The key as you know is the thickness.... I would double check that in that sale.. I used a double sided 3M roll which is almost same thickness slightly less as a quality sellotape so I had no height sitting issues... most inserts sit angled to the face of the bezel so the area to be taped is minimal in surface area terms.. I got that from a stationery store.. as I could be sure of the thickness before buying..However most of the newer reps I have found that the bezel inserts push fit quite nicely even when upgrading to gen insert so with those its half a job already.. I have worn a few without any tape (while I was deciding on whether to fix in a more durable manner.. Link to comment Share on other sites More sharing options...
themannier Posted August 29, 2015 Author Report Share Posted August 29, 2015 Very well, thank you very much for your reply !I think i will try this 3M LSE on ebay if i can get more informations about it (thickness); will contact a seller to know the thickness Link to comment Share on other sites More sharing options...
Legend Posted August 31, 2015 Report Share Posted August 31, 2015 The key as you know is the thickness.... I would double check that in that sale.. I used a double sided 3M roll which is almost same thickness slightly less as a quality sellotape so I had no height sitting issues... most inserts sit angled to the face of the bezel so the area to be taped is minimal in surface area terms.. I got that from a stationery store.. as I could be sure of the thickness before buying..However most of the newer reps I have found that the bezel inserts push fit quite nicely even when upgrading to gen insert so with those its half a job already.. I have worn a few without any tape (while I was deciding on whether to fix in a more durable manner..Pete you always have the most helpful and detailed advice to dispense when it suits you to be around. Sent from Mars using tapatalk Link to comment Share on other sites More sharing options...
kernow Posted September 2, 2015 Report Share Posted September 2, 2015 Pete you always have the most helpful and detailed advice to dispense when it suits you to be around. Sent from Mars using tapatalk +1Well said Legend. Pete, I hope you stay around. When I was a new here you took the time to guide me with some issues I had. It's a pleasure to read your posts. Link to comment Share on other sites More sharing options...
PeteM Posted September 2, 2015 Report Share Posted September 2, 2015 Thanks chaps... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now