tframo Posted November 9, 2015 Report Posted November 9, 2015 hi guys. I was originally trying to sell this but then decided to go the other way and put a gen movement in it.....further down the rabbit hole...I got a good deal on a gen 1520 movement over on the geek. $1000 for movement with decent dial and hands already installed Should be an easy swap I thought.http://www.repgeek.com/showthread.php?t=260329&p=2725413#post2725413 Arrived today, working well, I pulled it from the donor watch, and installed it into my dbane case. Fits like a glove and looks great imonow for the problem, i can't get the crown stem back into the movement, and movement isn't running..any tips or tricks I should be aware of? Thanks in advance with any help
marrickvilleboy Posted November 9, 2015 Report Posted November 9, 2015 are you pushing down on the release pin as you insert the stem back in?Have a sneaky suspicion you may have messed up the keyless works here
whoopy12 Posted November 9, 2015 Report Posted November 9, 2015 I thought these have a screw to secure the stem, not a pusher-type release pin, right?
misiekped Posted November 9, 2015 Report Posted November 9, 2015 No pusher on 1520There is a screw which you have to unscrew like two turn before you pull the crown out, The stem should be on setting position before you touch the screw When you put back turn the screw back, pull the crown once, push back and tighten the screw again If you unscrew to many turn you may damage the screw and need new one Sent from my iPhone using Tapatalk 1
dbane883 Posted November 10, 2015 Report Posted November 10, 2015 T, Did the stem come with the movement? Is it gen or aftermarket? But I'll repeat what misikped said above, make sure the set screw is properly tightened to secure the stem. By the way. That dial looks much better than the Yuki and more period correct for the 5513 you were going for.
tframo Posted November 10, 2015 Author Report Posted November 10, 2015 Thanks for all the help guys! I got it working!!!took some finesse and tweaking the screw that holds the stem in place, which by the way you need a very small screwdriver..T, Did the stem come with the movement? Is it gen or aftermarket? But I'll repeat what misikped said above, make sure the set screw is properly tightened to secure the stem. By the way. That dial looks much better than the Yuki and more period correct for the 5513 you were going for.thanks. I like the dial as well since I was going for around 1981 5513. not sure if stem is aftermarket Came on the donor watch/crown. I then put it on your gen crown. Here is latest pic on the wrist!
dbane883 Posted November 10, 2015 Report Posted November 10, 2015 Very nice! If I come across a gen dial I will let you know.
tframo Posted November 10, 2015 Author Report Posted November 10, 2015 Very nice! If I come across a gen dial I will let you know. thanks D! Please do Might as well go all in!
Ezio Posted November 10, 2015 Report Posted November 10, 2015 T i know a guy selling a dial and hands sending you a pm mate
droptopman Posted November 10, 2015 Report Posted November 10, 2015 Looks good T. For 81 a gen Maxi dial would work great but good luck finding one.
Ezio Posted November 10, 2015 Report Posted November 10, 2015 Looks good T. For 81 a gen Maxi dial would work great but good luck finding one. already on the help D Got a guy with a maxi dial i offered to T
droptopman Posted November 10, 2015 Report Posted November 10, 2015 already on the help D Got a guy with a maxi dial i offered to T Nice. Outside of the gilt 5513's the mark v maxi is my favorite.
marrickvilleboy Posted November 10, 2015 Report Posted November 10, 2015 No pusher on 1520There is a screw which you have to unscrew like two turn before you pull the crown out,The stem should be on setting position before you touch the screwWhen you put back turn the screw back, pull the crown once, push back and tighten the screw again If you unscrew to many turn you may damage the screw and need new one Sent from my iPhone using TapatalkSorry misread - 1520 are screw setting pins indeed.
tframo Posted November 10, 2015 Author Report Posted November 10, 2015 Looks good T. For 81 a gen Maxi dial would work great but good luck finding one.how much do these typically sell for? What year did Rolex start printing submariner above depth rating?
Ezio Posted November 10, 2015 Report Posted November 10, 2015 As i wrote to you In The pm my gen had it under from 78 my brothers a Like from 1980 but seen earlier models with it above my red sub which was earlier had it above so maybe some others Can share some light on it
droptopman Posted November 10, 2015 Report Posted November 10, 2015 how much do these typically sell for? What year did Rolex start printing submariner above depth rating? Not sure on either. I have not seen a maxi dial for sale recently.
Ezio Posted November 10, 2015 Report Posted November 10, 2015 http://www.5513mattedial.com/MaxiDials.html this have The answer here but still a Quick search show some later some sooner have The sub above or under Rolex probabaly used old Stock since some deviate from The model years
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now