automatico Posted January 15, 2016 Report Share Posted January 15, 2016 "I have had good success with stainless cases using HSS bits and my drill press set to 600rpm." I had some 1.3mm HSS bits quickly get hot and dull at low speeds when cutting lug holes maybe because the cutting oil was too slick. (?) Now I use a new bit dry and change it when it starts to get dull, usually after 4 passes. Drill bits are cheaper than cases. Link to comment Share on other sites More sharing options...
Bart Cordell Posted January 15, 2016 Report Share Posted January 15, 2016 I use 1,3mm HSS Cobalt drill bit at my dremel 3000 minimum 10000rpm speed without any problem. Link to comment Share on other sites More sharing options...
droptopman Posted January 16, 2016 Report Share Posted January 16, 2016 How did I miss this when you put it up. What a great post. Learned some new techniques thanks for sharing the detailed pics and work. Obviously a great watch resulted in all that work. Congrats man that is a beauty. Link to comment Share on other sites More sharing options...
prdk Posted May 9, 2016 Report Share Posted May 9, 2016 Beautiful read and well done! Link to comment Share on other sites More sharing options...
Mendota Explorer Posted May 9, 2016 Report Share Posted May 9, 2016 Gorgeous build. Very nice work with this! Sent from my SM-N920P using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now