GenTLe Posted March 20, 2016 Report Share Posted March 20, 2016 I am having hard time to get some of the Novodiac spring 231 (1.7mm used in the 2801.2, 2824, 2836, 2842 etc). This thing here: Anyone knows a source around EU, other than cousinsuk where they are not available, and those online shops that sell only to professionals? I have a couple of base plate with missing and I'd like to have them complete. Thanks, Gentle. Link to comment Share on other sites More sharing options...
GenTLe Posted March 23, 2016 Author Report Share Posted March 23, 2016 Bump Link to comment Share on other sites More sharing options...
SSTEEL Posted March 23, 2016 Report Share Posted March 23, 2016 Cousins sell the I believe, but they are out of stock until next month. Failing that, theres these.. http://www.boley.de/en/shop/4767.novodiac Link to comment Share on other sites More sharing options...
iain-d Posted March 23, 2016 Report Share Posted March 23, 2016 If it's just couple you need I have one spare in my parts box . If you pm you address I'll post it off to you am uk based Link to comment Share on other sites More sharing options...
ceejay Posted March 23, 2016 Report Share Posted March 23, 2016 Another good source is Gleaves & Co http://www.gleaveandco.com Sent from my iBend 6 Link to comment Share on other sites More sharing options...
GenTLe Posted March 24, 2016 Author Report Share Posted March 24, 2016 Thanks all Guys. Micky isn't Boley one of those that sell only to professionals? iain-d thanks for the offer: I will try to get one from commercial sources. Failing that I will eventually knock at your door Thanks CJ too, I didn't know about that site Link to comment Share on other sites More sharing options...
iain-d Posted March 24, 2016 Report Share Posted March 24, 2016 No problem if you need the spring just give me a shout. Link to comment Share on other sites More sharing options...
automatico Posted March 27, 2016 Report Share Posted March 27, 2016 This is off the subject a bit but I have had the best luck r/r Novodiac shock springs with a hollow punch with the hole tapered like a funnel on the inside from a standard staking set, mine is a Kendrick & Davis (K&D). Select a punch that is slightly smaller than the jewel setting and gently turn the spring to the openings by turning the punch by hand. This works better than any high priced tool you can find...but you have to find the correct punch. The punch I use is about 1.4/1.5mm at the tip. You can sand the tip down if needed by chucking the punch in a drill to spin it. They sell for about $1 or $2 each on eBay, watch shows etc or a repair guy may have an extra one they will sell. I do not know what sizes these are but here is what they look like except these do not have tapered (funneled) holes...eBay item number: 191834675111 Here is what my staking set looks like, a friend gave it to me: eBay item number: 371580372242 This one is only $750. (!!) Btw, Otto Frei has the springs for $2.45USD if you know anyone in the USA who might get them for you. I do not have an account with them. http://www.tztoolshop.com/page94.html Buy 12 and get them for almost half price. Link to comment Share on other sites More sharing options...
GenTLe Posted March 27, 2016 Author Report Share Posted March 27, 2016 This is off the subject a bit but I have had the best luck r/r Novodiac shock springs with a hollow punch with the hole tapered like a funnel on the inside from a standard staking set, mine is a Kendrick & Davis (K&D). Select a punch that is slightly smaller than the jewel setting and gently turn the spring to the openings by turning the punch by hand. This works better than any high priced tool you can find...but you have to find the correct punch. The punch I use is about 1.4/1.5mm at the tip. You can sand the tip down if needed by chucking the punch in a drill to spin it. They sell for about $1 or $2 each on eBay, watch shows etc or a repair guy may have an extra one they will sell. I do not know what sizes these are but here is what they look like except these do not have tapered (funneled) holes...eBay item number: 191834675111 Here is what my staking set looks like, a friend gave it to me: eBay item number: 371580372242 This one is only $750. (!!) Btw, Otto Frei has the springs for $2.45USD if you know anyone in the USA who might get them for you. I do not have an account with them. http://www.tztoolshop.com/page94.html Buy 12 and get them for almost half price. Thanks Automatico, I already built my tool http://rwg.cc/index.php?/topic/183168-Swiss-Novodiac-DIY-insertion-tool Link to comment Share on other sites More sharing options...
SSTEEL Posted March 29, 2016 Report Share Posted March 29, 2016 Found these on the bay and though of you A New listing Incabloc KIF Parechoc Wrist Watch Shock Material Watchmakers Parts Link to comment Share on other sites More sharing options...
GenTLe Posted March 29, 2016 Author Report Share Posted March 29, 2016 Found these on the bay and though of you A New listing Incabloc KIF Parechoc Wrist Watch Shock Material Watchmakers Parts Thank you Micky Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now