Omega PO Bezel issue

[nanoman]

Hello Folks, I received my omega Planet Ocean 42 mm Ti today. The bezel insert came off (see the pic) as soon as I opened the package. Looks like it was not glued on (factory miss). How do I put it back together? Thanks

[SSTEEL]

These are usually only held in place with a double sided sticky ring, if there's none of this found on the underside of the bezel insert, then get yourself some watchmakers dial strips, and apply short strips to the bezel, ensuring they only sick to the rotating surface, and then carefully refit the insert, ensuring its aligned.

Dial Replacement Stickers & Strips - Pack of 60 ! - for Watchmakers/Repairs

[kernow]

As per what Micky said. Plus you get the bonus of making sure it's correctly aligned. 

[jackflash]

How do I put it back together?

Looks to me like the double sided sticky ring is already in place, you can just make out the 3M logo in your shot of the bezel assembly. If that's the case, just remove the backing paper and place the insert.

[nanoman]

Thanks guys. I see the 3M logo. I can get it aligned correctly.

[SSTEEL]

Good luck