Tribal Posted January 9, 2007 Report Posted January 9, 2007 (edited) Hi Gang, i build a Sub for a friend.... He bought this one,but it was bad constructed... It was a horrible Gen Dial installed,wrongTube etc... The case is a rare Old MBW-Case.. I managed a better Dial,overhould the case,installed a gen Tube and crown The gen insert was installed,also a gen Datewheel that i realligned.. Here is the Result.. Edited January 9, 2007 by TwoTone
Falco Posted January 9, 2007 Report Posted January 9, 2007 very nice did you just glue the datewheel on or did you have to thin it or raise the movement ring under dial a bit?
Tribal Posted January 9, 2007 Author Report Posted January 9, 2007 very nice did you just glue the datewheel on or did you have to thin it or raise the movement ring under dial a bit? It's just glued on the datewheel.... Easy llike the factory Overlays.....
Star69 Posted January 9, 2007 Report Posted January 9, 2007 i think i know where your friend bought this watch had a simular bad exp. before. thanks for saving this watch Frank
Tribal Posted January 9, 2007 Author Report Posted January 9, 2007 i think i know where your friend bought this watch had a simular bad exp. before. thanks for saving this watch Frank Hi Frank,you know? Man yes this case is harder to find than everything... I had had some of this case,but i throw them away yeras ago.... Man i'm so stupid
By-Tor Posted January 10, 2007 Report Posted January 10, 2007 Tribal my friend...you're OBSESSED with 16610. Great work as usual mate, looks really nice. But that goes without saying.
ubiquitous Posted January 10, 2007 Report Posted January 10, 2007 Nicely done, as usual! You have these 16610's down to a science... I think you could build one of these in your sleep!
vmena Posted May 12, 2007 Report Posted May 12, 2007 Does anybody know if a gen 16610 crown fits a MBW modern 16610 tube?
Jetsons Posted May 12, 2007 Report Posted May 12, 2007 Does anybody know if a gen 16610 crown fits a MBW modern 16610 tube? It never that easy. . The 16610 rep tube looks like a toy compared to the OEM so you will need to install the correct tube, OEM or generic. The mod is well worth the effort not only in looks but improvement in functionality. Part #s: Triplock Crown (7mm) - P/N 24-703 Triplock Tube (7mm) - P/N 24-7030
vmena Posted May 12, 2007 Report Posted May 12, 2007 It never that easy. . The 16610 rep tube looks like a toy compared to the OEM so you will need to install the correct tube, OEM or generic. The mod is well worth the effort not only in looks but improvement in functionality. Part #s: Triplock Crown (7mm) - P/N 24-703 Triplock Tube (7mm) - P/N 24-7030 Thanks a lot Jetson... precise information from you, as usual I expected not needing to buy a tool to unscrew and screw the tube, which are pretty expensive...
vmena Posted May 12, 2007 Report Posted May 12, 2007 Then just another question... does anybody have these spare parts to sell?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now