HauteHippie Posted March 23, 2007 Report Posted March 23, 2007 Round 3 is overflowing already.... This has sort of taken me by surprise. I'm going to have to cut it off. The starting timeframe is a few weeks. I might want to push it out beyond tax day. We'll see. Usual disclaimer - Please read and understand the information in this post prior to signing up and don't sign up unless you're 100% committed: http://www.rwg.cc/members/index.php?s=&...st&p=219528 Round 3 AR List 1 - Pugwash 2 - Pugwash 3 - uziuzi 4 - notguilty 5 - rbj69 6 - rbj69 7 - rbj69 8 - rbj69 9 - rbj69 10 - jkpadget2 11 - jkpadget2 12 - jkpadget2 13 - jkpadget2 14 - jkpadget2 15 - mezzanine 16 - mezzanine 17 - mezzanine 18 - subzero1 19 - subzero1 ??? 20 - subzero1 ??? 21 - subzero1 ??? 22 - Rob1 23 - Rob1 24 - promotersf 25 - promotersf 26 - promotersf 27 - promotersf 28 - promotersf 29 - promotersf 30 - archibald 31 - archibald
Watchmeister Posted March 23, 2007 Report Posted March 23, 2007 By the way when you get these next two rounds done I think you may be surprised at how many people show up for cyclops friendly process.
Guest jkpadget1 Posted March 23, 2007 Report Posted March 23, 2007 (edited) see post below.....wrong SN Edited March 23, 2007 by jkpadget1
jkpadget2 Posted March 23, 2007 Report Posted March 23, 2007 sorry, signed in under the wrong SN (never use that one). anyways, I would like to be put down for 5 crystals. Thanks!!!
mezzanine Posted March 23, 2007 Report Posted March 23, 2007 I'm down for three crystals. Thanks Chieftang...took me a while to finally be able to get around to it.
subzero1 Posted March 23, 2007 Report Posted March 23, 2007 Did you ever figure out a way to safely remove an existing AR coating? If so, I'm in for 4. Otherwise just 1.
HauteHippie Posted March 23, 2007 Author Report Posted March 23, 2007 Did you ever figure out a way to safely remove an existing AR coating? If so, I'm in for 4. Otherwise just 1. Check out my AR Reference Thread and the section on AR stripping. I was able to successfully strip the rep coating off my Breitling Seawolf Avenger Ti crystal. Lacquer thinner and #0000 steel wool were the ticket. The crystal survived and I'm sending it in for coating in round 2. Try it at your own risk, and please follow the safety precautions I talk about in the post. Wow... We might be full for round 3 already.
notguilty Posted March 23, 2007 Report Posted March 23, 2007 how can i tell if my crystal has slight AR on it? i dont see any but then again i could be wrong.can i post pics here and maybe u guys can tell me if its ARed?
HauteHippie Posted March 23, 2007 Author Report Posted March 23, 2007 how can i tell if my crystal has slight AR on it? i dont see any but then again i could be wrong.can i post pics here and maybe u guys can tell me if its ARed? What kind of watch is it? It should be noticeable if it's there. You can angle it so that you can see a reflection from an overhead light source in it. The reflection should have a slightly bluish tint (possibly greenish or yellowish depending on AR type, but those are uncommon) if it is AR coated. I've noticed the blue effect is quite noticeable under florescent lighting.
notguilty Posted March 23, 2007 Report Posted March 23, 2007 its a breitling navitimer.i tried to look for AR under diff kinds of light but no bluish tint.have posted a topic in the breitling forum,lets see if we get any answers.
Rob1 Posted March 23, 2007 Report Posted March 23, 2007 Two crystals for double AR coating for me please.
maxmilian Posted March 23, 2007 Report Posted March 23, 2007 What is the estimated date for this run ?
promotersf Posted March 23, 2007 Report Posted March 23, 2007 (edited) Hey Brian, Stoked your doing another run, haven't checked the boards but you can count me in for: VC overseas IWC INGE IWC INGE CHRONO PAM 187 PAM 196(are these double AR?)...if not, scratch. PAM 063(are these double AR?)...if not, scratch. Breitling Bentley GT IWC GST what's the time frame, i'll contact rob to pop these bad boys off. thanks chief! dave Edited March 23, 2007 by promotersf
Rolexman Posted March 23, 2007 Report Posted March 23, 2007 Remove the existing AR with a Cape Cod cloth wrapped around a cotton wheel and use your Dremel... works like a charm!
HauteHippie Posted March 23, 2007 Author Report Posted March 23, 2007 OK that's more than enough for round three!!! Time frame to start this one is going to be a few weeks. I'll let you know. I've got to get the round 2 crystals collected first..... subzero1 - I won't feel bad if you only do the 1 crystal!!!
xelorrolex Posted March 23, 2007 Report Posted March 23, 2007 (edited) Well, i would be in, if only i knew how to remove the cristal Is it risky ???? i'd like to do it on my omega PO and my IWC spitfire chrono ... Any help would be appreciated Thanks Xel Edited March 23, 2007 by xelorrolex
Nebakanezzar Posted March 23, 2007 Report Posted March 23, 2007 Count me in for 3 for a single sided run!
Pugwash Posted March 23, 2007 Report Posted March 23, 2007 Well, i would be in, if only i knew how to remove the cristal Is it risky ???? Removing it isn't that big a deal. Putting it back, however, is. It requires special tools.
Rob1 Posted March 23, 2007 Report Posted March 23, 2007 Removing it isn't that big a deal. Putting it back, however, is. It requires special tools. A quick tutorial on removing and refitting a crystal would be much appreciated. How much is the tooling (a crystal press?)?
Pugwash Posted March 23, 2007 Report Posted March 23, 2007 A quick tutorial on removing and refitting a crystal would be much appreciated. How much is the tooling (a crystal press?)? If my crystal press arrives in time, I'll do you a tutorial. Otherwise, if you're in the EU, I'll be offering a removal/fitting service for Chiefy's AR runs.
chad Posted March 23, 2007 Report Posted March 23, 2007 2 for round 3 for me Removing it isn't that big a deal. Putting it back, however, is. It requires special tools.
rogerthat Posted March 24, 2007 Report Posted March 24, 2007 How do I add my name to the next list: 1 double sided Crystal out and ready to go! Thanks, M
eunomians Posted March 24, 2007 Report Posted March 24, 2007 I think I'm in for one, but I need to clearly determine if Trusty's IWC MK XV has any sorta AR.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now