macscac Posted September 19, 2007 Report Share Posted September 19, 2007 hi! forgive me but could anyone tell me how to safely take off the bracelet of my sub? i do not have any watch tools and i dont want to damage anything. would love some advice. thank you Quote Link to comment Share on other sites More sharing options...
lazarini Posted September 19, 2007 Report Share Posted September 19, 2007 Hi there, the best is a bracelet removal tool but if u dont have that handy u can manage it also with a small screwdriver ... turn the watch upside down on some soft place not to damage it and locate the opening of the end links on that back that will expose the pins ... i presume we are talking 16610 modern sub ! When u will see the pinn slip in the screwdriver and try to push it away from the case this shoud loosen it up and out of the hole , do the same on the other side and pull out the bracelet ... its easy ! Be pacient and carefull afcourse to avoid damaging the case ... NOw that said if u have a vintage sub theneven easyer ... vintages have drilled lug holes through the case ... use an office paper clip to push the pin out of the case from both sides and remove bracelet . Hope this helps , kind regards laz Quote Link to comment Share on other sites More sharing options...
Dizzy Posted September 19, 2007 Report Share Posted September 19, 2007 I was gunna say to use one of these .... but your method works also Laz. haha Quote Link to comment Share on other sites More sharing options...
lazarini Posted September 19, 2007 Report Share Posted September 19, 2007 Hahahaha hilarious man regards laz Quote Link to comment Share on other sites More sharing options...
Stephane Posted September 19, 2007 Report Share Posted September 19, 2007 hmmm, put it in a table vise (with rubber protection)...it will even easier. Cheers Stephane Quote Link to comment Share on other sites More sharing options...
laskos Posted June 13, 2010 Report Share Posted June 13, 2010 Thanks from me also! Quote Link to comment Share on other sites More sharing options...
ChipSlap Posted June 13, 2010 Report Share Posted June 13, 2010 You might want to consider buying a bracelet removal tool, just to have around. They're quite reasonable on ebay. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.