rower Posted September 20, 2007 Report Share Posted September 20, 2007 I have a very dirty crystal on the inside and thought I would try to fix it myself. I got the case back and crown guard off and took out the crown and stem. THen I didn't know how to get the movent out to clean the inside of the dial so I stoped and put it all back together. Unfortunately, the crown will not go to the winding position it will only set the hands now. Is there something I missed? Did I mess this one up? Thank you in advance for your help. Link to comment Share on other sites More sharing options...
rower Posted September 21, 2007 Author Report Share Posted September 21, 2007 Some one please...I'm dying here! Link to comment Share on other sites More sharing options...
Victoria Posted September 21, 2007 Report Share Posted September 21, 2007 Some one please...I'm dying here! Free bump for desperate member, since I don't know enough to help. Good luck. Stay calm. Everything in life is fixable. It just takes hope, courage and money... Link to comment Share on other sites More sharing options...
Pugwash Posted September 21, 2007 Report Share Posted September 21, 2007 Some one please...I'm dying here! More info needed. How did you remove the stem? Link to comment Share on other sites More sharing options...
rower Posted September 21, 2007 Author Report Share Posted September 21, 2007 I unscrewed the highest blue screw in the picture from my top picture and simply pulled it out (after removing crown guard). Thanks. More info needed. How did you remove the stem? Link to comment Share on other sites More sharing options...
RWG Technical Posted September 21, 2007 Report Share Posted September 21, 2007 You messed up the keyless works somehow. Your only saving grace is if while unscrewing the small screw to release the crown, you only turned it at the most 2 turns, your ok and the watch can be fixed easily. If you turned the set lever stem release screw enough to disengage the screw from the lever, the watch has to come apart to fix it... RG Link to comment Share on other sites More sharing options...
RWG Technical Posted September 21, 2007 Report Share Posted September 21, 2007 What position was the crown in when you released the screw, hopefully not the time setting one (it should be in the winding position) RG Link to comment Share on other sites More sharing options...
geo1nah2a Posted September 21, 2007 Report Share Posted September 21, 2007 What The Zigmeister said.. No damage is done, a rep friendly watchmaker will have it ready in a few minutes with out any spares needed. You could do it yourself, only if blessed with steady hands and equipped with patience and tools. (I 've done it. It is not that hard) Good luck. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now