ajoesmith Posted January 4, 2008 Report Share Posted January 4, 2008 Here it is http://www.rwg.cc/members/index.php?showtopic=65241 Finally an engraved Rotor, this was one of the biggest glaring flaws Link to comment Share on other sites More sharing options...
sweet Posted January 5, 2008 Report Share Posted January 5, 2008 This is actually a second factory that is making HBBs. These are characterized by old asian 7750 movements with regulator and better rotor. Also, this factory uses a fake carbon fiber dial that is just checkered and not actually carbon fiber. The AR is there but it is weaker than the original HBB factory. While the engraved rotor is a big plus, the engraving is too big and old 7750 is not as reliable as new 7750. Also the 99/250 and LE stamp is wrong because it only applies to limited editions where Aspen is not limited. 301 SB 615946 is a designated serial for St. Barths which is a CF dial ceramic bezel SS case BB. This factory fortunately makes this version but as stated before uses fake CF so that's a big down. Link to comment Share on other sites More sharing options...
Victoria Posted January 5, 2008 Report Share Posted January 5, 2008 Finally an engraved Rotor, this was one of the biggest glaring flaws Oh yes, I noticed. I also noticed the price. Worth it for the upgrade, though. Link to comment Share on other sites More sharing options...
Mickey Padge Posted January 5, 2008 Report Share Posted January 5, 2008 Should it not also have a black engraving? Plus black screws (not blue) with a black "H" on the bridge under the rotor? Two steps forwards three steps black, er I mean back Link to comment Share on other sites More sharing options...
UB7 Posted January 5, 2008 Report Share Posted January 5, 2008 Mickey is right, the engraved rotor looks incorrect unfortunately and that one looks even less like the gen...I'd say the sticker or decal on the other 1's are way better and look more like the real thing..the letters on the rotor are supposed to be black, unless the special editions have different rotors heres a pic i found on timezone Link to comment Share on other sites More sharing options...
dvn Posted January 5, 2008 Report Share Posted January 5, 2008 So how about this one: http://www.rwg.cc/members/index.php?showtopic=65242 Is it in the same situation? I really like the price but if that is the case then... Link to comment Share on other sites More sharing options...
RWG Technical Posted January 5, 2008 Report Share Posted January 5, 2008 These are characterized by old asian 7750 movements with regulator and better rotor. Are you certain that this is the old 21.6K 7750? The 21.6K Asian 7750 has a chromed look to it, whereas the new ones are all sandblasted/anodized type of finish. This one looks new to me, and I can't remember seeing a new watch in the past 18 months that didn't have the new A7750 in it. The older A7750 is very reliable, I have one in my PAM 188 that has been running non-stop for 3 years...and not one problem with it. I am planning to do a teardown and report on it soon... RG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now