Martyd3 Posted March 17, 2008 Report Share Posted March 17, 2008 It wasn't cheap, but the font looks good to me and the acrylic pearl fits perfectly. I deepened the rehaut of the bezel rather than grind the hell out of the insert. It worked perfectly. http://www.pmwf.com/Watches/WATCHSALES04/W...orRolex1680.htm Link to comment Share on other sites More sharing options...
DuDro Posted March 17, 2008 Report Share Posted March 17, 2008 Looks good! And you're right, NOT cheap...Is this correct style insert for the 5512/5513? Link to comment Share on other sites More sharing options...
seadweller3 Posted March 17, 2008 Report Share Posted March 17, 2008 Cool! I have a vintage gen insert in mine and it absolutely makes the watch. Sending it off to the spa for a relume of dial/hands, crown guard work and gen bracelet with 580's installed. I will post scans after. The only thing missing will then be a gen movement which I am not in a hurry to do, quite honestly. Link to comment Share on other sites More sharing options...
Martyd3 Posted March 17, 2008 Author Report Share Posted March 17, 2008 Looks good! And you're right, NOT cheap...Is this correct style insert for the 5512/5513? This insert will fit, but I am not sure if the font is the same. My guess it that no one will know It is a very nice insert. Link to comment Share on other sites More sharing options...
alligoat Posted March 17, 2008 Report Share Posted March 17, 2008 It wasn't cheap, but the font looks good to me and the acrylic pearl fits perfectly. Did you install an acrylic pearl or is that the one that came with the PMWF insert? I think it looks pretty darn good myself. As far as the font and thickness, as I recall, over the years Rolex themselves varied it on the vintage inserts- no one was paying that close attention at the time. Link to comment Share on other sites More sharing options...
Martyd3 Posted March 17, 2008 Author Report Share Posted March 17, 2008 Did you install an acrylic pearl or is that the one that came with the PMWF insert? I think it looks pretty darn good myself. As far as the font and thickness, as I recall, over the years Rolex themselves varied it on the vintage inserts- no one was paying that close attention at the time. I installed the pearl. It is from Otto Frei. I agree that the font and thickness varied on vintage inserts, but the MBW insert has too thick of a font. This insert, with the pearl installed, is much closer in look and quality to a gen insert. That is of course IMHO Link to comment Share on other sites More sharing options...
mezzanine Posted March 17, 2008 Report Share Posted March 17, 2008 While I can understand why this would be a good option considering the rarity of the genuine inserts, these aftermarkets are pretty costly. I'd love to be able to handle one. I've yet to see an aftermarket one that can get the appearance in the light of the gen. There's a dimension to the blackness of the genuine that can make it look as though it's painted, but the material itself is actually different as well. This is evidenced by the effects of bleaching both, and the time differential it takes to get the fading effect for each. Genuine inserts are the quintessential vintage rolex part. They embody the ironic qualities that are characteristic of all the genuine part upgrades. They're one of the absolute hardest parts to find. They're way overpriced by any standard definition of reasonable value, to the point of absurdity. They're hard to disguish between the rep and gen for most people visually. Problem is, they're absolutely necessary because they're the only coloured part of the watch. As a result, they're completely worth it. Link to comment Share on other sites More sharing options...
perry563 Posted March 18, 2008 Report Share Posted March 18, 2008 I thought the MBW accept gen parts? I would think a 60 buck aftermarket insert would be made the same size as the gen.........so .....why did you need to grind down the bezel to make it fit? I thought the MBW accept gen parts? I would think a 60 buck aftermarket insert would be made the same size as the gen.........so .....why did you need to grind down the bezel to make it fit? Link to comment Share on other sites More sharing options...
Martyd3 Posted March 18, 2008 Author Report Share Posted March 18, 2008 I thought the MBW accept gen parts? I would think a 60 buck aftermarket insert would be made the same size as the gen.........so .....why did you need to grind down the bezel to make it fit? I thought the MBW accept gen parts? I would think a 60 buck aftermarket insert would be made the same size as the gen.........so .....why did you need to grind down the bezel to make it fit? Correct me if I am wrong, but genuine inserts (or 1:1 copies) fit, but they sit too high in the bezel. The insert should be slightly recessed in the bezel. Grind was a bad choice of words. All I did was take a little material off of the bottom part of the bezel when the insert sits. Think of an L shape. I took a little bit off of the top of the lower half of the L, so the insert sits better (or lower) in the insert. Link to comment Share on other sites More sharing options...
perry563 Posted March 18, 2008 Report Share Posted March 18, 2008 How was the pearl that came with that insert? Link to comment Share on other sites More sharing options...
Martyd3 Posted March 18, 2008 Author Report Share Posted March 18, 2008 How was the pearl that came with that insert? It was fine, just lume with no metal surrounding it. Link to comment Share on other sites More sharing options...
perry563 Posted March 18, 2008 Report Share Posted March 18, 2008 It was fine, just lume with no metal surrounding it. What was so much better about the pearl you used? Just courios since I have a 1680 that I want to mod. Was the pearl the insert came with good enough? What did the other pearl have that this did not? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now