leitztozeiss Posted June 22, 2006 Report Share Posted June 22, 2006 I just received my 212 from Richard. Looks great, and it is exactly as described - thanks Richard. The only problem is that I think it has some humid air trapped inside the watch case. At normal room temperature, the crystal fogs up. When I place the watch next to a warm cup of coffee, the condensation evaporates and the crystal looks clear. I've had the watch sitting next to the warm cup with the crown pulled out, but I'm thinking that might not be enough to allow the humid air to escape. So, I'll probably remove the case back when I get home and "air it out" for an evening. That should do it, right? So, in the meantime, here's a quick pic of my slightly heated unfogged 212. Nice dial, eh? And, check out those polished pushers!! Now, I just need the engraved crown guard . . . oh, and a europelli baseball strap. Other observations: the crown and lever move nicely between the open/closed positions. the movement has a nice smooth winding feel, the chrono pushers have a slightly light but positive feel when engaged, all hands snap nicely back to the zero position. Overall, very nice. Link to comment Share on other sites More sharing options...
leitztozeiss Posted June 22, 2006 Author Report Share Posted June 22, 2006 Well, it was bothering me, so I just now took a ball of packaging tape and managed to remove the caseback. Link to comment Share on other sites More sharing options...
leitztozeiss Posted June 22, 2006 Author Report Share Posted June 22, 2006 Here are pics of the case back removed, then right after flipping the watch over. Check out the condensation forming on the inside surface of front crystal - this is already after removing the caseback!!! Wow. Link to comment Share on other sites More sharing options...
leitztozeiss Posted June 22, 2006 Author Report Share Posted June 22, 2006 Put my office AC on full blast for about an hour, left the back open, got a coffee, and presto - no more humid watch case. Case back is on and no more condensation. Whew! Glad I got that cleared up, lol. Link to comment Share on other sites More sharing options...
Craytonic Posted June 22, 2006 Report Share Posted June 22, 2006 I would leave it out to dry overnight just to be safe? That can't be good for the movement... Link to comment Share on other sites More sharing options...
docblackrock Posted June 22, 2006 Report Share Posted June 22, 2006 Two words for you LTZ... Silica gel Link to comment Share on other sites More sharing options...
cwai02 Posted June 22, 2006 Report Share Posted June 22, 2006 SiO2 Link to comment Share on other sites More sharing options...
Polynomial Posted June 22, 2006 Report Share Posted June 22, 2006 Anyone else experience this????? yeah if you take it swimming Link to comment Share on other sites More sharing options...
ubiquitous Posted June 22, 2006 Report Share Posted June 22, 2006 Toss the watch (with the crown open) into a little sealed baggie with a packet of silica, and you're set! Link to comment Share on other sites More sharing options...
chris5264 Posted June 22, 2006 Report Share Posted June 22, 2006 The only time this happend for me was when my watch had direct contact with water. It really shouldn't be so bad you need a paper towel. Perhaps something happened in shipping and it experienced a rapid temp change? Good luck,,,,who knows, could be fine and never happen again. interesting idea using the silica,,,,,,,,, Link to comment Share on other sites More sharing options...
dadog13 Posted June 23, 2006 Report Share Posted June 23, 2006 last weekend i had the same issue with my 217...i was at the bar...it was full of people and the temp inside was high...i gave a look at my watch...and it was foggy! then after some time...the fog inside the crystal disappeard...then after some time came back...and after some time dissapeard again and when i got home it disappeard again... i was wearing the watch for the whole week...it works just fine...and the problem didn't came up... but def...i will take it to the doctor! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now