Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

HBB Ceramic Bezel and Hairline Cracks at Screws


Watchmeister

Recommended Posts

I have noticed a number of folks with hairline cracks on their "gen" polished bezel. I have two on mine and as a result have a new bezel coming. I assume it happened when I got nervous and screwed the screws too tight. Does anyone have any thoughts or tips on how to avoid this as I will be mounting the new bezel and will be really pissed off if I do it again. I always wondered if the gen has the same issue or some form of washer or rubber bushing to avoid applying undued stress on the bezel. I had also wondered if there was one bad batch of bezels which impacted the earlier models or we were simply getting the rejects from a good ceramic factory. Any help would be appreciated. I do not want to have thrown out $250.00. :bangin:

Link to comment
Share on other sites

*cough*

What about having a PVD coated steel bezel ? Cheaper and more solid...

:blush:

that's what I tought too...

damn, the ceramic bezel is too expensive and delicate to play with...

imagine if that's the case with the gen Hublot...in that case they are making a lot of spare bezels for the customers...and I really doubt that the bezel from the 1st version of the HBB is genuine...

Link to comment
Share on other sites

True, but as it's not genuine, who knows the manufacturing specs ?

Besides, very hard can break : I suppose it has more chances to resist scratches than shocks.

Think of sapphire crystals : they don't scratch but can break, and I have no doubt they could also crack if they were drilled.

What about using some thin layer of silicone (same as you use for your bathroom ?)

Link to comment
Share on other sites

It is too weird. Ceramic is supposed to be an incredibly hard material. I really don't get it. /snip

Ceramic is very hard when it comes to friction and scratches, but not on impact and compression. Having said that my HBB RG PC has survived a spectacular 5 meter dive to a tiled dancefloor. (Don't ask :p I'll post pics to prove that there is no reason to be afraid of today's gold plating) On your issue, I would advise You to use some thread locker as others have suggested.

BTW my guess is that the cause of the cracks might not be the ceramic bezel, but the screws that are not perfectly copied from the genuine: if they don't fit perfectly with the bezel, they are becoming like a spike that instead of pulling the bezel down, it splits it open.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up