Feta1 Posted June 26, 2008 Report Share Posted June 26, 2008 So i noticed yesterday that the lettering on the case back of my SSD has lost the black fill. Any idea how I can fix it? Quote Link to comment Share on other sites More sharing options...
thetwins Posted June 26, 2008 Report Share Posted June 26, 2008 So i noticed yesterday that the lettering on the case back of my SSD has lost the black fill. Any idea how I can fix it? I noticed the same thing with mine recently -- I am going to attempt a thinned-out wash of semi-gloss black enamel paint, which I will apply and then wipe with a clean cloth while it is still wet to leave only the recessed lettering and logos filled in. I'll let you know how it goes. Quote Link to comment Share on other sites More sharing options...
Feta1 Posted June 26, 2008 Author Report Share Posted June 26, 2008 I noticed the same thing with mine recently -- I am going to attempt a thinned-out wash of semi-gloss black enamel paint, which I will apply and then wipe with a clean cloth while it is still wet to leave only the recessed lettering and logos filled in. I'll let you know how it goes. Thanks... I wish I new how they do it in the first place then i could try to replicate the factory's process Quote Link to comment Share on other sites More sharing options...
Dizzy Posted June 26, 2008 Report Share Posted June 26, 2008 use black enamel paint with a toothpic.. when its about 75% dry wipe off the excess. After its completely dry after a day or so, you can carefully remove the excess. Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted June 26, 2008 Report Share Posted June 26, 2008 why worry it will fall out of the gen eventualy as well Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.