gplracer Posted July 5, 2008 Report Share Posted July 5, 2008 Do the vintage rep subs have the same issues as the modern subs? I mean is the crown too low and the other dimensions off? I just wondered how they compared in accuracy? Thanks for answering this noob question. Also, does anyone sell a decent vintage rep with a cheap movement? Link to comment Share on other sites More sharing options...
Tribal Posted July 7, 2008 Report Share Posted July 7, 2008 For vintage Subs there is only one way. MBW/MBK ones, they are most accurate and they can take Gen Parts. On this ones are also some flaws but not really a problem. Crown position is a bit lower than on gen. Link to comment Share on other sites More sharing options...
Irontomkidd Posted July 7, 2008 Report Share Posted July 7, 2008 I just read a great review from By-Tor http://www.replicacollector.com/members/in...showtopic=18174 Great comparison pix as well. Link to comment Share on other sites More sharing options...
POTR Posted July 7, 2008 Report Share Posted July 7, 2008 For vintage Subs there is only one way that costs less than a couple thousand dollars or so... Link to comment Share on other sites More sharing options...
gplracer Posted July 8, 2008 Author Report Share Posted July 8, 2008 (edited) What about the crown position on a MBW? Is it off just like that of a modern sub? Sorry missed the comment above. For vintage Subs there is only one way that costs less than a couple thousand dollars or so... Edited July 8, 2008 by gplracer Link to comment Share on other sites More sharing options...
alligoat Posted July 8, 2008 Report Share Posted July 8, 2008 Crown position on a vintage MBW isn't that bad- say like a 1680. The crown guards still need to be modded and they are too fat to begin with, but 99.9% of the people aren't going to notice. I think what POTR is referring to is that the MBW/MBK route is the most reasonable costwise. You can go a step up to the Vietnamese dealers like NDTrading Corp or Jewelry and Watch which have expensive vintage cases and maybe better dials, but at that point you almost have to put a Rolex movement in there and that runs at least a grand (US dollars) for the movement, so you've got a $2500 franken or more by the time it's over. The sky is the limit when you go from the rep to franken watch world This 5508 is a franken with a Rolex 1520 movt- over $2000 to build, quite a bit more than an MBW- say you spend $400 for the MBW, put $200-300 in improvements into it, you have a $700 watch. Third option is something like this: An inexpensive CN rep, put a better pearl in it, $25-30, mod the cg's yourself, put a better dial in- I spent $150 for a better 5513 dial, greased the o-rings and off I go- a cheap beater- ready for swimming and snorkling. A little over $300 in it for me. So it really boils down to how much do you want to spend! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now