Removing the stem from a Quartz movement

[triplehd]

Need some help. Been practicing on some of my asian auto reps to learn a thing or two about watch repairs. I have a quartz Tag Aquaracer and would like to remove the crystal. However, I must remove the movement first. The issue - how do I remove the stem?

[triplehd]

No one likes quartz?

[offshore]

What Miyota movt number is that?

Try these anyway.

1. Look for a button with an arrow pointing at it.(There appears to be a button in a hole at 10 o'clock, back into the movt a bit- this could be it.)

2. Remove the plastic retaining ring, it may be under there.

3. If the above fails, pull the stem out, whilst closing viewing the movt. Look for something moving, you will find the button close to this area.

If none of the above helps, give me the movt number, and I will find it on a movement I have here.

Offshore

[Rolexman]

I see a button with 'push' next to it...... I would try that one

[offshore]

I see a button with 'push' next to it...... I would try that one

Indeed...my screen must be too dark/small, as I couldn't read any of the writing.

Indeed again, if it says "Push"...well ......push.

Offshore

[manuelram16]

Yes, it looks like my Miyota OS20, I use a sharp toothpick inserted in the hole next to the "push", the button is under there.