ToothDoc Posted August 8, 2006 Report Share Posted August 8, 2006 I was at work today and my tag link chrono started making a funny noise. When i would shake a little before you could feel and hear it winding now it sounds as if somthing is bouncing off of the case back. it makes a klinking noise as if something is loose and bouncing around back there. I have never opened up a rep before and was wondering what this may be. So far the watch hasnt died yet but i am worried that it isnt winding cause it doesnt make the winding noise or vibrate on my wrist any more. any help would be greatly appreciated. Is this a quick fix if i pop the case back or do i need to find a watchsmith to do the work. thanks in advance Dustin Link to comment Share on other sites More sharing options...
ubiquitous Posted August 8, 2006 Report Share Posted August 8, 2006 Could be a case clamp, and is possibly causing the rotor to stick. Or perhaps the winding rotor came off. Difficult to say without popping the back... Link to comment Share on other sites More sharing options...
relaxman Posted August 8, 2006 Report Share Posted August 8, 2006 Sounds more like the wobulator. Mind you it just a stab in the dark. Just kiddiing Im going with what Randy said. I had the same thing happen before (Rotor came off) . Just take the back off if you can had have a looksy. MG Link to comment Share on other sites More sharing options...
ubiquitous Posted August 8, 2006 Report Share Posted August 8, 2006 The wobulator is a standard feature on the 7750's! Link to comment Share on other sites More sharing options...
Richard Tracy Posted August 8, 2006 Report Share Posted August 8, 2006 ..wobulator... Let's not forget to mention the thingamajig could also be out of whack ... Link to comment Share on other sites More sharing options...
ToothDoc Posted August 8, 2006 Author Report Share Posted August 8, 2006 Thanks guys for the info. the watch is still working (and still losing a second or two per hour) but i dont know if it is running on the power reserve or not. i will pop the back and check it out when i get off of work and take a look inside. i dont have the tools here to get the caseback off. by the way if i dont have a case back remover what is the next best thing so i dont scratch the hell out of the caseback? any suggestions? any way i hope its not the thingamagig or the whatsamacallit that is off. thanks for the help again. Dustin Link to comment Share on other sites More sharing options...
alligoat Posted August 8, 2006 Report Share Posted August 8, 2006 If you don't have a tool, take a piece of duct tape and wad it up, press down on the caseback and turn counter clockwise. If the caseback isn't screwed down too tightly, it should turn and then you can get it off. Just reverse the process to put it back on, remembering that it won't be too tight and you may have to get it tightened later. Link to comment Share on other sites More sharing options...
Richard Tracy Posted August 9, 2006 Report Share Posted August 9, 2006 What I use is rubber gloves... the tighter the gloves, the better, Once the gloves are on, hold your watch, back facing you and use your thumbs to apply counter-clockwise direction. Works for me... Link to comment Share on other sites More sharing options...
Bignasty Posted August 9, 2006 Report Share Posted August 9, 2006 Don't know where you are located but most larger cities in the US should have a Harbor Freight. They sell Jaxa style case openers which are good for pretty much any watch except Rollies. The rubber glove trick usually works if the gasket isn't pinched or if it hasn't been clamped down since its original purchase. I've found that most rep case backs are surprisingly loose from the factory. Good luck! Jon Link to comment Share on other sites More sharing options...
ToothDoc Posted August 9, 2006 Author Report Share Posted August 9, 2006 Thanks for the tips guys. i wish i woulda read this at work cause i got a hella lot of latex gloves there. i will try the duct tape trick. wish me luck. Dustin Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now