Leaderboard

So the OEM strap arrived today for the new Honpo 029 and looks/feels great! Have a great St Patrick's day guys AJ

Go Gonzaga!

That sub would take the Rolex 7030 tube and either the 703 or 704 crown. the BP crown might fit on the 7030 tube- you'll just have to try it and see. I like the 7030 tubes from wholesaleoutlet990- I've had good luck with them. Clarks also has tubes, but I've broke a few of them. Cleaning out the threads in the case takes a 3mm x .35 tap. I use some lock-tite when installing new case tubes. Helps w/ WR.

How is it possible I am the first LV .... :/

Haha i didnt work for 40 years so not totally true Its all about willpower to reach your goal where you want and when you want A wise man told me once The richest place In The World is The grave yard all those dreams and stuff people Wanted to do but never had The guts to follow through with Just imagine all those things that could have been invented or found made etc Just follow your dreams and be yourself And if people dont accept that [censored] THEM Those people Will always have my respect While others i say get up and go do it

Here you go... Gen strap on my 'old' V7 Gen Strap on my Noob Ceramic

Welcome to this addictive hobby. Stay with our TD's, as AJ have said before me. You can find them here: http://www.rwgforum.net/forum/230-watches-clothing-accessories/ This is also a must read for our newest members (http://www.rwgforum.net/topic/85981-hey-noobor-not-so-noobread-this-now/), you can find here a lot of information, and if it is not there first try to find it via the Search functionality. Most questions you would have are asked before.

Welcome to RWG On the homepage scroll down to the area where we recommend Trusted Dealers. These dealers have gained their status by providing quality products and quality service, we do NOT recomend any other sites as there are a lot of sites that provide false information and false claims of their products which often lead to dissapointment after you've paid your money! Look around and you will be amazed at the deep knowledge held and shared by your fellow members. As for a Ti 389, look at the dealers and the M2M sales board on the homepage. Regards AJ

At what position are the gen dial feet of your dial? Gen dial feet for 1570 movement would work on an ETA 2824, 2750 ... The adaptations to be done are at the mainplate area, close to balance wheel, for the "57minute" gen dial foot and drill or file the mainplate in the area of the mainspring barrel, so the "30minute" gen dial foot would enter. This has to be done very very carefully, as the gen dial feet pass by the mainspring barrel and balance wheel by microns. It is adviseable to get the service instructions drawings for a 2824 or 2836 and test where the gen rolex dial feet would end. Get an old mainplate and first drill or file on it, before starting with the movement. I've seen this somewhere before, so it is doable!

Macro Monday

So true... that's an absurd thing to do and a useless "watch."

build in a mbw case with as low-beat movement, case drilled out for the bigger movement with genuine dial,datewheel,crown,tube,bezel and crystal. hands ate tudor submariner. hope you enjoy the pix

Gen

I bought a ZF 382 when it came out from Puretime, and have loved it since the start. But recently it started to suddenly stop from time to time, then a shake and it went ticking again, also the power reserve was VERY low like it didn't autowind enough. This i got tired of, so i took matters into my own hands and took of the caseback - could feel/see/hear that the balance weight was running very tight as it almost couldn't turn. So i took of the autowind balance weight (this by unscrewing the center). The clone plate i also took off (see the two red circles, these holds the plate in place), to see if an loose items was laying there - lucky me nothing. Tighten all blue screws and movement holder screws, as some of them was VERY loose, put back on the clone plate. Then i took the balance weight, and cleaned it in a ultra sonic bath, cleaned it in water and dryed it. Put it all together again, and persto, balance weight is spinning with ease now, and the auto wind suddenly works like a charme now. Just an idea if your P9000 clone in your Bronzo stops from time to time.

Where you live looks lovely, but cold! I spent most of my time growing up right next door to the Lake District in the UK:- And (not my photos) Moved down south now and really miss the nature and scenery.