denimhead
-
Posts
1,571 -
Joined
-
Last visited
-
Days Won
9
Posts posted by denimhead
-
-
Haha, that´s a cool cartoon, and who is nanuq?
Haha, that´s a cool cartoon, and who is nanuq?
Hi Toro, He's the large white Bear that admins the forum! and hits nails into wood with his watch cases for a unique aged effect
-
I'd try Mq as a starter if you want the best www.vintagewatchesmq.com
Cheers DH
-
Hi Bill,
Nice to see the Cloak and Pipe back on here! I learned an awful lot from your posts when i first joined the forum.
DH
-
Nor sure how long ago this was written but he obviously hasn't seen any of TC's watches yet! Being in retail I'm constantly in contact with members of the general public, if a guy walks into my shop (I sell vintage watches as well as menswear) then 9 times out of 10 i can tell if he's got a Gen or a Rep on his wrist, purely by his body language.
Normally it if i give his wrist a quick glance without realising he's doing it, if his initial reaction is to put his wrist behind his back then he's sporting rep. They normally won't make eye contact either
Funnily enough i had a customer in the other day sporting his new Yachtmaster 2 which is 100% Gen and i was amazed at the amount of Rotor noise it gave off. Not sure if its because it has a chrono function that makes it noisier than a standard 3135 movement?
-
Congratulations on your 8 year stretch! I'm sure we'll still be here in another 8 years. Can you imagine how the rep scene will be by then?????
All the best
M
-
I could do with some advise from the newer model Rolex experts on the forum about this piece as I'm more of a Vintage Man. This was purchased back in 2008 from Natalie watches. At the time it was very much at the top of the tree in terms of reps, And I'm sure if memory serves me right it was an eye watering £500.00!! oh how we've all learned over the years
My question is how good is the case set in terms of closeness to gen? Is it worth considering for a Build?
It has a nice 93250 on it but with the usual give away rounded '3's. The movement appears to be a swiss 2836-1 and the dials a glossy Maxi dial. Any idea about what the parts are worth? based on the fact that the keyless works need re setting apart from that it seems to be running fine
Appreciate feedback chaps
DH
-
Very Nice indeed! It's a great feeling when these long term projects get finished, only to be replaced by another one
-
100% GEN Early 1675. if you do your research on the different fonts used for the engraved numbers and writing inside the lugs you'll find that these more rounded larger numbers are correct for the early models. By the way the way the crown guards look very clean and not over polished.
cheers DH
-
1
-
-
I'm by no means a movement expert but yes there was a Chrono module for the 2892. AFAIK it was just that, a module that was added on top of an existing 2892 base movement.
As far as the rotor, don't think they're compatible tried looking at part numbers to prove my point but got crossed eyed....
maybe someone with more authority can come along with the part numbers for you.Appreciate the imput my man
-
Calling all Movement experts, I'm assuming not, but in theory would an eta 7750 rotor fit the eta 2892-A2 movement? Was there ever a Gen eta modified chrono version of the 2892-A2
Cheers
-
Agreed A, 100% Gen. should be interesting to see where this goes in terms of value.
-
Very Nice Marlin, are you using a Gravograph for this?
Cheers DH
-
Good afternoon Gents,
As the title suggest, I'm in need of a Panerai Rotor for the eta 2892/3 movements. If you have one you'd like to sell then give me a shout.
Cheers DH
-
Welcome to the mad house Rich
-
Very Nice A, Whats the diameter of the case mate?
Cheers M
-
-
Just been asked for a break down in terms of cost, Not a cheap build but then its certainly not anything like the required $16,000 for the cost of a Gen, Then again are you ever 100% sure its the real deal? Lots of Frankens out there
Gen 1575 non hacking movement $2000.00 - full service $200.00
ingod mid case/case back $350
Mq dial $350.00
CWP hand set $100.00
Phong bezel $250.00
Gen tube and crown $150.00
-
1
-
-
This is my second Full on Franken 1655 and i learned a lot from the original Phong case based build and wanted to make this even better. Enjoy and excuse the dust!
Specs are -
Gen non hacking Rolex 1575 GMT movement correct for a mk2
modded CG ingod44 fully engraved mk2 mid case/ correctly stamped case back
Phong mk2 bezel
CWP mk straight seconds hand set/ correct long tailed Ornage hand
Mq mk3 Rail dial
Gen 6mm crown and tube
Sternkruez T116
Fully waterproofed to 30m
-
3
-
-
Count me in Alvin, happy to help
Cheers M
-
Welcome on board from Sheffield
Cheers DH
-
Very Nice Indeed, these were also issued to the British Armed forces so a nice Historic piece.
Cheers M
-
Big D, remember that if your Importing anything from the U.S you'll be faced with Import Tax and duties. Unless the vendors happy to state a low value on the customs form and Insure the package separately then It can get costly. I learned the hard way once
-
hello all
the time has come for me to consider a big crown build
dont get too excited, i want this to be a budget build.
from what ive read there are 3 or so options for the budget conscious
1. silix case / rafflestime
2. tiger concept case
3. helenarou
the silix case, i believe does not use a retaining ring so a crystal would sit to high and must be glued in.
the tiger case seems to have an incorrect dial opening and is not compatible with the variety of rep dials available, the rest seems decent
the helenarou is a tad more expensive and the low crown position is not something i like, but the brass bezel ring is nice.
am i correct in choosing a tiger concept case for this build?
i have heard it can fit a clarks T19, it would need lug holes drilled and for a rep dial to fit would need some rehaut milling. does anyone know the if the tube would need modding to fit a rep 8mm brevet crown?
so far my shopping list looks like this. i dont know exactly how compatible each part is with this case
Tiger case
clarks t19
helenarou dial
helenarou hands OR tiger hands
eta 2472 or DG2813 pearl
athiya 8mm crown
2mm bars
NATO strap OR silix rivet stretch bracelet
insert??? not sure what options exist here, might just keep the factory one.
what would you guys use in your budget big crown builds and why?
any and all ideas appreciated
thanks!
Talk to Big Daz, he's now back from his travels and building them again at a very reasonable price without the hassle of doing it yourself. Have a look at the pair of 6538 twins he did for me and Nanuq a while back. I personally think he's the Best in terms of aging and vintage luming on these watches. Akira is also fantastic if you wanted a tropic dial doing.
Cheers DH
-
Happy Birthday M
Cheers M
The Mayer-Maron connection comes crashing down
in The Rolex Area
Posted
Maybe he could get Big Daz to re finish some of his 6538 dials, he's attempted to sell some absolute howlers on Ebay over the years. It was only a matter of time wasn't it