yodap

No, they aren't made by rep factories currently.

Thanks, I posted my question there... I hope my watchmaker will be able to make one working movement from the current two... Greetz.

Yes, that's right.

Hi all, I've got a bentley 6.75 with the mentioned movement. It ran fine for 3/4 year, and then started to stop during nights with the small seconds at 05 (exactly). I took it for a "full service"** and it ran much better, with 36hr power reserve (it had about 18-20 when it was new). Now I had two nights with the same issue as before (stops during night exactly at 05)... What the heck is happening??? I'd appreciate every piece of advise!!! **= I'm not sure if he did a full service, as the chrono second hand remained EXACTLY at it's resetted position (leans a very bit left from the breitling anchor). I also had a problem with starting the chronograph, and then the whole movt would stop (happened about 1/50 times when starting the chrono). This problem still exists sometimes as well. My final question: Is the secs @ 3 + big date mod just a plate on the top of the A7750? If so I have a spare A7750 so my watchmaker could do the swap... Thanks for your answers! J.

That's A2824-2.

That's a steel bracelet... I'm wondering about it as well... Greetz.

How much do these gen calf straps go for? I'd need one for my blue skyland (22mm). Greetz.

Wings logo looks a bit off to me... But I'm not sure, it may be just because of the angle! Any chance to get more pics?

Hi all, I just want to ask the 6.75 owners here how long your power reserve lasts. Mine was quite dying ( wouldn't run from 10pm to 7am in the morning ), so I took it for a full service to my watchsmith. He said power reserve should be now around 18 hours. Okay. It ran through the night without problems, I left it on my desk, and put my skyland on. I came home, and what do I see? IT STOPPED AT 11:10 AM!!!!! DAMN! I went to bed at 10:30pm and it ran till 11:10am, so the power reserve is around 12h40min, which is still crap compared to my skyland (A7750) with running almost for two days, like the gen should. Please write if that's normal because of the additional gears or something.... Or should I take it back to my watchmaker? Greetz.

So the bezel uses screws to tighten or untighten itself, right?

If the bezel is press fitted, the gen bezel won't most likely fit. And if it's press fitted you also can't remove the rep crystal. My guess would be unfortunately a no, but I don't have this model, someone owning one should chime in!

Any chance to see those pics with the speed bracelet on? Please upload them once more... Thanks! Greetz.

1: No, I don't have a montbrillant at all (yet ) 2: On the first batch of navis they were accurate, on the 2nd batch they messed it up, and on these montbrillants they are lined up accurately again! Hope this helps. Greetz.

Out of the box? - No. But you can build a superb franken Navi with gen dial + chief's AR. Check out this Navi models review from Andrew, it's very useful: http://www.rwg.cc/members/Andreww-s-Guide-...lin-t68665.html BTW, the montbrillant isn't too small with it's 47mm diameter! Hope this helps. Greetz.

Okay, thanks for the information once more! Greetz.

Thanks, I've been searching for papers for a month... Was this the boxset which the certificate was included in? http://www.theonewatch.com/Breitling_Origi...x_set_6052.html Thanks again!

One more question to answer please: Where did you get the certificate? Thanks! Greetz.

Sad news... At least for me Have you bought it? Greetz.

Yupp, this could be the point. Which year was the skyland released? My V2 was (will be?) unfortunately in 2016 Greetz.

Damn, maybe we should start advertising the skyland everywhere as the "new gangzta bling" I want a gen dial Greetz. Edit: How about Navi dials? I've never seen any bling navi, however dials are available! There should be a way to source them! But this way isn't through the breitling service... I'm hoping for this to happen...

Where do you get it from? Can you get any more? I'd KILL for that certificate Greetz.

Good results

Hi guys, I'm just wondering if there is any way to get genuine dials from somewhere. As far as I know Defender110 sells only Navi, BCE, and SA dials. Is there a chance of getting one? I know the guys in the breitling service, but they told me no way because they have to send the old dial to breitling when ordering a new one, and breitling wouldn't be happy with a rep dial... Anyway they said they'll relume my rep dial as a last opportunity Thanks, waiting for your answers Greetz.

afaik it does. But I'm not sure either. The graphite should have automatic in red. There is a grey version with black subs and automaic in white, this could be it. But again, I'm not sure about the colour. Greetz.

Yes, a 7753 would work correctly, but afaik it's expensive, and hard to get. We'd really need a movement pro here! Please chime in! Greetz.