Ronin
-
Posts
4,386 -
Joined
-
Last visited
-
Days Won
27
Posts posted by Ronin
-
-
A w e s o m e ! What was your datewheel solution? Ohh, and was the 1675 dial to mitigate the pie-pan of the 6542?
-
I too went through France with 3 watches. They happend to all be Gen, (Breitling, Ball, Rolex)... and not an issue what so ever. No looks, no questions, no scruntiny.
If you look like you can afford them and walk the walk not an issue. If you are 22yrs old with the ~equivilant of $80,000 worth of watches, wearing cloths from Hot Topic or Wal-Mart ------ You might get challenged.
You still did not mention if you were truely moving lots of stuff from a household or just doing carry on, simple check bag.
There are also ways to incorporate watches into your checked bag that could also go un-noticed...
-
I have done it a few times. There is really nothing to it if you can get to the 2 screws that retain the entire DW. Sometimes the one screw is slightly obscured by the overlay, but if you use a smaller blade or go in at an angle you should be fine. Reassembly is all about getting in at an angle. I use Rodico to hold things in place, then screw the retainers down.
Just jump in. If you can't access the one screw, you will have to remove the overlay.
-
1
-
-
Sweet!
-
What level of moving are we talking about here? A suitcase, laptop and new location. -or- Moving furniture, boxes of books, cloths, computers etc?
If you are moving lots of stuff, hide them in other things... Use your imagination. If it just you and a suitcase, well that makes it difficult.
-
Make me an offer. :-D
Kidding, this is a keeper... Yuki Case (Generation 1)
-
As someone with 80+ hours of tatto's, that would make a killer tattoo. I can only hope your guy is good, especially with monochromatic shading, and that you are not to dark skinned so it pops.
Depending how big you go, that is at least 6 sessions of ~3 hours each. (done right) Again, not sure your situation, but at the shop I go to that would run you $2,700 + tip(s).
-
Once you cross the 35/40yr old line and dress/act have a compatible lifestyle nobody looks twice (except maybe REP owners).
Over 60, you can be wearing black socks w/sandels, bermuda shorts and a Hanes T-Shirt wearing a $$$,$$$ Patek Phillpe and no one would notice rep/gen or otherwise...
-
I recently purchased a tudor black bay rep from Andrew and I have loved it but the problem that I have encountered is that due to by very small wrist I have a great amount of difficulty getting the bracelet of the watch to sit correctly on my wrist. I have ordered a few nato styled straps to fix this problem but I am wondering if anybody knows if it is at all possible to get a Gen fabric strap that is sold with the watch from anywhere (and approximately how much it would cost). If this isn't possible does anywhere sell something similar (a fabric strap that isn't a "one piece watch strap" that slides through the springbars or a nato but a fabric strap that contains the springbars).
Thank you all in advance
HaydenM
I agree. I have a 7" wrist on a large day, and I have not been able to size the bracelet comfortably. IF THIS IS A 1:1 REP of the REAL GEN BRACELET - This has to be the WORST design in Rolex/Tudor history. The rigidity of the clasp connectors, only 3 micro-adjustment holes simply SUCKS! I contemplated drilling another set of micro-adjutment holes in the clasp, but really, the damn thing is too heavy.
I have the above photoed bomber leather & Nato's now. I have to wonder, if the GEN bracelet is as bad-- if that is why they more or less sell most of these with Leather + Nato. Hmmmmmm...... Rolex needs to take a page from Omega and utilize half links near the clasp if they are going to be stingy on micro-adjustments.
-
4 quick tells on rep (left):
1.) GMT hand thickness
2.) "9" calendar wheel is not centered
3.) Bezel fonts
4.) Endlinks
You would probably fail the "Sushi Bar" test if you sat next to me. That is my yardstick for Rep -vs- Super -vs- Franken -vs Gen spotting... I also have 20/15 vision so that helps. :-)
-
1
-
-
Buy a $7.00 tube from clark/ofrei. I can't tell from the photo, but did it push into the case, or snap and part is still screwed into the crown. If it snapped, you just need a rat-tail file end of, or ez-out, to extract the broken tube, and chances are you can unscrew the rest of the tube from the crown since it is not under any real tension or again ez-out.
I wonder if there is any stem or keyless works damage from the impact or balance spring???
-
Awesome. My brother just took a job in Alaska. I believe he is in Nome.
-
I have too many gen dials lying around collecting dust. It's a good way to let them see the light of day
Got any Blue Rolex dials you want to get rid of?
-
This is the 3804 aka 21j-GMT. Note the top plate that keeps everything "tight" from slipping... (If you see a 2683-mod, the "bolt on is obvious/sloppy")
The 3804 has an actual date wheel carrier. This translates to NO overlay on top of original ETA datewheel on Mod-2836. Also, the "stock 3804B" date wheel aligns with most Gen/Rolex 15xx date windows out of the box!
-
Every ETA 2836 w/GMT mod has failed prematurely for me, or 'drifted'. IF you plan on using the GMT hand setting a lot, or not using a winder and letting doing a lot of date changes (the mechanism is interlinked) BEWARE.
On the other hand, the DG3804 (aka 21j GMT) seems to be a little more resiliant. No slippage of the GMT hand.
The tradeoff is simple: 28,800 Beat rate on the Mod-2836 but less reliable (IMHO) vs 21,600 Beat rate, more reliable, and costs $30 to R&R every ~8 or so years instead of servicing.
Edit to add: It is my understanding there is NO SUCH THING AS A SWISS 2836-GMT. And chances of someone (rep maker) taking a Swiss base 2836 and adding the Chinese Module is slim, and still worthless.
-
Very Nice. What are the details of the build?
-
In order:
1.) Remove tell's / flaws
2.) Learning / Tikering & wasting DAYS on eBay and forums is fun ;-)
3.) Improve reliability. (Not so much true with some recent HQ reps)
-
-
Same factory also do this one, and there's a video showing real color:
http://www.ttw888.com/index.php?main_page=product_info&cPath=1_5&products_id=10347
An equally awful rep. :-(
-
-
There is no rep. There was an attempt by Parnis, but it is 21mm, not distressed yet, and you need to file off Parnis http://www.ebay.com/itm/221383142315.
This seems to be the goto at the moment-
http://www.strappedfortime.com/shop/item.aspx/bomber-jacket-leather-watch-band-strap/248/
-
1
-
-
Pre-5512/13 = 6536/6538~5508/10 ???
On the budget side there were Silix cases. Or you can check out helenrou or rafflestime, but their dial size requirement is larger.
-
Awful pictures at TT's site. Color can't be right in those photos. He needs to do the Video and better photos.
-
My wife calls my 1016 "The Don Draper" after the fact it was his ~Season 4 watch.
Rant against modern Rolex designs
in The Rolex Area
Posted
Awful. Just plain awful. Looks like it came out of a Seiko design studio, or late 90's Tudor design studio. If it were branded Seiko it would be COOL and I would own one. Branded Rolex -- it just doesn't fit. The proportions are all wrong. My .02.