centaur

http://2geek.net/eMart/index.php?c=21&p=74

The cg doesn't even touch the crown in the first pic you posted so that right there screams sketchy. Also, the PAM 203 (second from the left on the bottom row) is clearly a rep. The logo next to the 3 is way too close to the numeral. That alone would be worth over $100,000.

Guys, you're totally missing the point. Sure a 24/24 version would be just like any other strap out there and should cost just as much, but for 18 grand you get a sweet taper and 2 mm less material at the tip! Highly collectible in its own right!

This is probably the most informative and interesting posts in recent memory. Thanks for taking the time to put all that together.

A couple issues with the 021 is that it uses a platinum case and Rolex 618 movement. A more reasonably priced and closer to specification alternative would be the 322. http://www.puretimewatch.com/product/pam322-radiomir-titanium-47mm-updated-movement/ If you're going for a tobacco dial, nothing pairs better than a titanium case.

If they're the recent H Factory releases go with the updated and higher beat rate one. There have been multiple reports of the slower movements crapping out quickly so it's up to you to decide whether a little extra investment is worth it to have a watch that works.

It depends on the model as Pete said. For guys just getting into Panerai, the typical starting point is the 111, and based on PureTime's head-to-head review of the Noob and H versions, the consensus is that Noob is better. The same might not apply to others though.

Any observations of the movement, Pete? I'm wondering whether they took out the seconds pinion or just cut it down.

It sounds like you're seeing the half moon effect which is how it's supposed to look. No worries about that.

If you're interested in 40mm PAMs, there's the famous shop in MBK Center that carries those. I believe that's the only model available from there. PWC/Robert is also in Thailand, but I'm not sure of the exact city.

Is that one of the old school 049s? Unfortunately, it doesn't look like the factories will be doing a run with the same quality anytime soon, if at all.

Does anyone know the average power reserve for a 1030 movement? I just tested my franken 6538, and it lasted just under 45 hours on a full wind. No complaints since that's comparable even to modern ETAs, but I thought it was supposed to be in the low 30s. Maybe the overhaul did wonders, but I'm wondering if I should crack the caseback to make sure the watchsmith installed the right movement.

Does anyone know the average power reserve for a 1030 movement? I just tested my franken 6538, and it lasted just under 45 hours on a full wind. No complaints since that's comparable even to modern ETAs, but I thought it was supposed to be in the low 30s. Maybe the overhaul did wonders, but I'm wondering if I should crack the caseback to make sure the watchsmith installed the right movement.

You certainly got your point across, especially with the 5508 since the look is really close to the 6538. I'm really liking it on the Pepsi.

I've only seen 6583s mounted on Bond NATOs or rivet bracelets so I'm wondering how to pair it with a nice protein based strap. My assumption is that something smooth like ammo (maybe the Ted Su below?) would work better than an exotic skin but am really curious about your experiences and suggestions. The other thing, of course, would be what color leather and stitching to tie with the gilt dial and hands.

So far it looks like those guys are a bit cheaper than Sead, but according to posts elsewhere, expect these movements to be more mainstream very shortly as other dealers start getting their supply. Simple economics would suggest that as supply increases the price will drop but who knows.

I read on another forum that even back in '09 someone tried to order and got no reply so could be a really outdated site.

Looks like I'm not alone with admiring that set. Bases are the best as far as I'm concerned, and those look perfect together. I'm a fan of the 210, but it'd look like the outcast.

Delivery From 25th April Onwards !!!!! according to Andrew's site now.

It's really tough to catch, but before the camera changes you can see the red hand move, and by move I mean tick. Why a fake was used who knows, but the fact of the matter is that there are way too many red flags with this one. On the other hand, if AP did sponsor the film, take their money, buy a Canal Street version, and keep the rest as profit. Putting the business in show business.

At least that one has macros. Who wants to buy a 6538 with all shots far away? http://cgi.ebay.com/Rolex-Vintage-Submariner-Big-Crown-6538-1958-/300543413635

Shouldn't have peeked at this post. I've been considering selling my franken after it's assembled, but those pics are gorgeous. Really turned out well.

I forget where I read it, but I remember somebody mentioning that it came from a separate factory so one can only hope for something better down the road. The movement and stock strap look like a good starting point though.

PureTime / Angus should have some. I saw this model for the first time on his site.

Do any dealers still have some lying around, or is the only way to pick one up through a member? A MBK 049 would make for a nice trade.