Tribal

Build up a triple 6 SD Her it is Old BP 16600 Reshaped Case, Cg's, drilled Lugholes. Gen Crystal Gen Insert Gen Tube and Vintage 703 Crown Gen Springbars Yuki 16660 Dial Gesendet von meinem 23078PND5G mit Tapatalk

Build another new 1680. Base watch is a JKF but there is not really much what needed of the Rep. I reshaped the whole Case, thinned and drilled the Lugs, opened the Cg's. Installed a gen T-127, gen Tube and Crown, The Dial was horrible so I took a Yuki one with correct hands. Datewheel is open 6&9. Modded the Inlay to look more matte. The Bracelet is the Factory 93150. This came out. Gesendet von meinem 2107113SG mit Tapatalk

Gen 580 Endlinks Gesendet von meinem 2107113SG mit Tapatalk

5513 Gesendet von meinem 2107113SG mit Tapatalk

Wristshot and smal update. Gen 580 Endlinks now installed.[emoji6] Gesendet von meinem 2107113SG mit Tapatalk

No the Case accepts a 26mm Dial without modification. Maybe you need only a new Dial.[emoji3577] Gesendet von meinem 2107113SG mit Tapatalk

It's the brother of your MBW, but yours has a better Case.[emoji6] Gesendet von meinem 2107113SG mit Tapatalk

Some other shots. Gesendet von meinem 2107113SG mit Tapatalk

Beauty![emoji108] Gesendet von meinem 2107113SG mit Tapatalk Fantastic.[emoji108] Gesendet von meinem 2107113SG mit Tapatalk

Specs: JKF Base watch Drilled the Lugholes to 1,2mm Reshaped the whole Case to make the Lugs thinner, opened the CG's Replaced the ugly domed crystal to flat T-19. Installed a 703 Tube and Vintage 703 Crown Dial is Yuki 200m first underline Hands also from Yuki. Modded the existing Inlay to look matte. Relumed the pearl to white Lume. 580 Endlinks Fat 2mm Springbars Brushed the 93150 Bracelet That's it[emoji6] Gesendet von meinem 2107113SG mit Tapatalk

The reference was to build a 5513 like new old stock. Ok here we go[emoji6] Gesendet von meinem 2107113SG mit Tapatalk

Big Block[emoji3577] Gesendet von meinem 2107113SG mit Tapatalk

Yes you are right but this is a rare one for 3135. This is also installed on my 16800.with VR 3135

Best 6 digit in my opinion is VSF 126610 OTB. Gesendet von meinem 2107113SG mit Tapatalk

Updated mine with gen Open 6&9 Date and H6 pinions. Gesendet von meinem 2107113SG mit Tapatalk

Thanks and yes I miss his posts too.[emoji22] Gesendet von meinem 2107113SG mit Tapatalk

They come from eBay and colored to match the Dial Lume. Gesendet von meinem 2107113SG mit Tapatalk

Today Explorer. Gesendet von meinem 2107113SG mit Tapatalk

My old MBW 1665 get a new update. H6 pinions and new Hands on gen ETA 2846. This is my oldest Watch about 18 Years old fully modded back in the days. Gesendet von meinem 2107113SG mit Tapatalk

Try Mochacha![emoji106] Gesendet von meinem 2107113SG mit Tapatalk

For 1675 I meant it fit the gen Plexy without work, not as a base for a 5 digit GMT Sorry for my poor English. Gesendet von meinem 2107113SG mit Tapatalk

Yes the Case is a bit thicker. It's only possible to get it thinner with a lathe. I will measure my build. Gesendet von meinem 2107113SG mit Tapatalk

Thanks, work is done now. Gesendet von meinem 2107113SG mit Tapatalk

Update. This is build on an 5 digit Explorer watch as base. I installed a gen Spec Bezel System on it. Reshaped the Case and CG's. Now I need a good GMT 2 Dial, if you have one chime in.[emoji6] I will replace the Inlay also. Here the Pics

Work is done for now. Gesendet von meinem 2107113SG mit Tapatalk