1680

Now that are some news, JMB I'll contact you

Amespinosa, I was thinking of something like that, just with a plexi.

Hello,

I need a low beat movement for a case that accepts an ETA2824. The 2846 has a lower stem position and does not work. I found the ETA2452 and 2472 which have beat rate of 18000 bph and a stem height of 1,85mm, so only 0,05mm off.

And the ETA2782, 21600bhp, but a stem height of 2,00mm, 0,20mm off.

Does anyone know alternatives or want to share his experience?

Thanks!

Hello,

does anyone know a source where I can get Datejust dials?

I want to build a budget DJ with a spare case and don't want to spend a lot for a gen dial.

I'm looking for a grey or black dial with stick markers.

Thanks

I want to build a 1016 (and maybe a 1601 later).

That's why I need a low beat movement.

Which A21J? The one that came with my Cartel 1680 is a highbeat and has an annoyingly loud rotor.

I want to use a ETA an I thought the higher stem position of the 2824 is the reason why you can't use a 2846?

Thank you all for your help.

I'm going to use JMBs case I think, the only problem is that I need a low beat movement so a 2824 will not work.

Hello,

does anyone know if there is a DJ style case for a 2846 with plexi out there?

Thanks

Does he reluming?

The lugs are wrong, they end with an angle and not straight like the gen, hard to explain... the endlink should be parallel to the lugs...

That's going to be a problem because I'm from Germany, I highly doubt that I'll find a watchsmith with an account here...

Hello,

my gen 93150 has not its flip lock lever and finally I've found these repair kits at Startime, but they have 2 different versions. My clasp is from '85 so it should be the first version according to Startime, but I'm not totally convinced it's the right one. Can anyone help me out with this?

V1: http://store.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=1&Category_Code=1D_Rolex_cparts-flip&Product_Code=RMOSS-FK

http://store.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=1&Category_Code=1D_Rolex_cparts-flip&Product_Code=RMOSS-FLIP

V2: http://store.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=1&Category_Code=1D_Rolex_cparts-flip&Product_Code=RMOSS-FK2

http://store.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=1&Category_Code=1D_Rolex_cparts-flip&Product_Code=RMOSS-FLIP2

And the second question is; can anyone tell me the prices of the items please? I have not created an account with them. Hope it's possible since I have no business.

Thanks!

PWMF = poor man's watch forum. http://www.pmwf.com/Watches/WATCHSALES/WatchAccessoriesSalesTable.htm

cheers

No, should work but it depends on its concentration I guess.

I've never seen a rep tapestry dial, so left gen. If there is one please tell me.

I've built a 1016 with the same MBW "Swiss Made" dial. Looks like a Luminova service dial, though I never found proof of those existing.

@alligoat: If you find a picture of a gen again, please post it!

And what do you think of his 1680 case (http://www.ingod44.com/replacement-rolex-mid-case-red-submariner-1680/) ?

I'd like to finish my Sub, have Josh's case and wondered if this was a decent alternative for Yuki's case.

Hello,

I have a nice old Poljot Chronometer which runs about +1min/day too fast.

I don't want to move the wrong lever, could anyone tell me which is the right one?

Thanks!

@high.: yes it is one thing rep makers never get correct.

@highoeyazmuhudee: could you please tell me a bit about the modded link. Can't send you a PN.

Thanks

Is anyone in contact with ingod? I'm desperately trying to source a 1680 dial, but he doesn't reply on emails.

You know that Ofrei is famous for his "vintage" acrylic pearls? We're not looking for the modern ones.

If there were more people to share the fees, I would be interested!

I think something around 250-300€, and only in exchange I guess.

Hello,

can anyone tell me, where I can find a safety lever for a gen 93150 clasp? I know it is spare part nr. 32-20741, but the ADs in my area don't believe this and just want to sell the whole clasp.

I would be glad if anyone helped me out finishing my bracelet

Thanks

Hi,

when I install a 1680 dial from ingood in my Cartel, do I have to fix the DW?