sputim

QC pics look fine. Although it's not a super rep you will like it I guess. Gesendet von meinem iPhone mit Tapatalk

Looks like high quality good! definitely looks good Gesendet von meinem iPhone mit Tapatalk

Case has rehaut engraving which refers to an older tc case but the dial looks just gen or KH like. Anyhow great watch enjoy it! And maybe you will get an answer from the member who sold it. Gesendet von meinem iPhone mit Tapatalk

Dial looks awesome as well! Is it the new KH or a gen dial? Enjoy your watch. I am awaiting my v6 in a few days Gesendet von meinem iPhone mit Tapatalk

Problem is that its not gen like construction. If it was one wouldn't be able to unscrew the HE valve completly. Good luck Gesendet von meinem iPhone mit Tapatalk

I never thought about this xstal option on a 16610 but somehow sounds interesting let us see the result wehn you get there Gesendet von meinem iPhone mit Tapatalk

Lucky you markiemark and enjoy the watch I am patiently watiting for my TC v6. Paid on 29th November but didn't receive any message since then. Hopefully it is already on its way. Have a gen insert waiting as well Caddell insert definitely looks nice but depending on the lightning conditions the rounded edges are quite good visible. Are you really sure about buying an AR'd x-stal for the 16610?

Its the same bp bezel as the ones used in the watch you get from tony. Sometimes its a little bit of luck but the ceramic sub is not the most accurate rep. Also the bp sub lacks the platinum like engraving..

Oh sorry to hear that. I know how despreta something like that can get :/ Somehow I don't think its a sizing problem it could be possible. Best tip I can tell you and which was said alraeady is to pull out this inner "stick" a little bit out of the case (it's only about 1mm) and then held the watch that it points to the bottom (use gravitation as ur friend). Then you should slowly try to screw in the HE valve. Problem is that on the HE valve there are like 2 screw threads and subsequently the "stick" must be aligned correctly. Try it again. I can remember that I had to pull the little "stick" out several times and held the movement upside down until it worked Good luck again

Andrews bezel is totally fine. Ordered one from him once and it is the bp bezel in good condition!

ceejay even though I have to send it to an expert in order to have it service it is worth it. Except of the sudial flaw, which I guess is 1 out of 100, it is such a stunner! Build quality compares to my pam 111 noob v3. But be aware of the fact that the watch attracts a lot of attention and sometimes that is not something I want so it won't be a daily watch to me but definitely a nice dress or holiday watch

ceejay I have a very thin wrist aswell but it works quite well Thought it looks to big at the beginning but I think it works quite well Give the v6 a go

What an outstanding piece of art! Truely breathtaking

Did you manage it?

Besides the crooked markers lookes ok. Just kidding looks excellent and I can't see a single flaw! You will be blown away by the built quality of this v6. Just bare in mind that you never change the date between 10 and 2 o'clock and use the chronograph function as few as possible. Cheers

Yes Domi seems to be the guy for me. Switzlerand has no repfriendly watchmakers and the last one I had something fixed scratched the dial. I replaced some dials and with a paper or bergeon dial protecter scratches are easy to avoid. This just gave me proof how clean he worked. Moreover, the dial has dust on it. This time I rather give it to an expert who treats the watch like a gen and not like a canall street garbage watch Again thanks for taking your time and helping me with this issue! Now I have to wait some weeks and I guess I will enjoy it much more then. Meanwhile I hope my v6 arrives soon

Ok I guess this is out of my abilities. I contacted Domi in Germany and he told me that I can send him the watch. He offered me to do a complete revision of the movement which I think is wothtwhile anyway since this watch is definitely a keeper for me Thank you so much for your help. My understanding is growing with your experts tips

The watch is back on my writs without the hacking possibility and futhermore the chronograph function is not doing a single move when pressing the buttons. But I think this is a different cup of coffee right?

ceeejay it worked!!!! but now here comes the but: the hack lever is gone and the movement doesn't hack when its in time setting position. Is this a problem?

wow ceejay many many thanks for your detailed information. This is truly a heads up for me! just tried to remove the c ock together with the balance wheel on a cheap pam rep I have. Worked out fine and it is still running hope I can manage to do this with my hub. I am a little nervous but if this works it would be awesome. Otherwise I will send it to a watchmaker how is repfriendly I will keep you informed how it went on Thank you so much!

Welcome riccardorolex! Read a lot before you dig in for your first rep. However, you can chose one of the trusted dealers (TD's) of our section with confidence. So far I have dealt with Torobravo and Andrew from TrustyTime. Both are top notch and deliver quality goods and above that provide a great aftersales service which is worth a lot in this game

Thank you so much ceejay for this input! It is exactly what happened to me. When I inserted the stem the first time I had some problems and I think I just misaligned the hacking lever then?! Anyhow, the balance wheel won't turn when stem is in. Now I am able to take off the dial. Do you think it's an easy fix as soon as the dial is off? Or can I also access this hacking lever with taking off the bridge like on the picture? Thanks and hope to get this baby fixed soon

Here a picture of the movement. The keyless works seems to be aligned well and inserting the stem is not a problem either. But I have no clue why the movement is not running?

Yes several times. Removing and refitting is no problem at all. All functions work but the movement stands totally still. No clue why? My only guess is that the hack lever (keyless works) is somehow in the hacking position.?

Yesterday I removed the stem of my hbb v6 a7750 in order to correct a subdial. When I put back in the stem the watch started running but when I had the stem all in the watch the movement suddenly stopped. Winding, date setting and time setting works all perfectly but the movement is not doing a single thing How can I fix this? Is this a problem with the hack lever? Thanks in advance and merry christmas to all