Bart Cordell

You would not use superglue. Buy G-S Hypo Cement to glue plexi and insert. You can use an hair dryer to remove plexi. The bezel retaining spring is not reachable on new silix build. On these photos from old bezel on HF bonesey tutorial you can see the spring Good luck !

Not off topic at all. I read old silix case bezel are easiest to remove by pressing out the spring. Now there is no space at all to access this spring. The only way I found is to use a knife as lever, and pray to not bend the bezel. On the first case I have modded, the bezel pop easily that way. But on the second one it's very hard and the bezel was bent. I managed to straighten it with difficulty. I've read your topic about your request for a modder for your 6538. Why not buy some tools and make it yourself ? There is a very nice build process by Kime on HF.

Thank you ! Carefully polished this evening, and the result is very nice in my opinion. I love wide chamfer on those big crowns.

Worked on my second case this weekend. Mid case drilled and tapped. Lug holes were already drilled by Big Dazza. Then I tried to make wider lug bevels with dremel disks and rolls. Then sanded mid case sides and bezels separately. Big Dazza case before reshape And after

Stunning ! It's a dream watch.

Momotaro Jeans, these are recognized as a reference by purists.

HR Dials are very nice. I have a branded 6538 from him, and keep it unmodded for the moment...

You can cut the tubes inside the endlinks. Then open them a little enough to accept gen springbars.

Thanks ! Yes first case reshaping. Thank you. Found 1.3 from a French dealer few days ago. But I will visit cousins, trying not to lose myself in this website.

Thanks Frazzle ! Yours is very nice too. What hands do you have ? Not the silix stock. Raffles dial and hands ?

Athaya crown received. Fortunately the mid case thread is good and the new tube fit well. Just one problem, I cut the stem a little too short. I can't hand wind no more. I have to buy new DG2813 stem and cut it less.

George Envoyé de mon iPhone en utilisant Tapatalk

Wow ! Envoyé de mon iPhone en utilisant Tapatalk

Thanks. Yes empty lug holes look to large, but it's better with springbars Thank you. In few days, when Adrian big crown received. Thank you. Case not engraved. Envoyé de mon iPhone en utilisant Tapatalk

Thanks ! I drilled with 1.2 before 1.5. But it's to small for my spring bars. Only one pin enter fully in the hole. The two holes need to be perfectly aligned for that. 1.3 would be perfect but I can't find it. Any tip on how I can chamfer them ? Envoyé de mon iPhone en utilisant Tapatalk

Hi everyone ! I'm the happy owner of a nice Big Dazza 6538 since 3 month. But after reading more and more thread I decided to improve this watch. Two detailed 6200 and 6538 build from Mike on HomageForum particularly. So i bought a silix case and tools to try my first reshaping. Lug hole drilled with 1,5mm drill bit. Silly crown tube removed, mid case drilled to 3,5mm, then tapped to accept Athaya big crown V2 in transit from Jakarta (can't wait !) Lug sanded with Dremel, tried to create a not too bad bevel. Sharp edges also softened. Mid case worked with 400, 600, 1000 sand paper then polished. Bezel edge sanded and light heated to reproduce gen brassed color. Crystal sanded from about 1mm. Bezel insert aged with 1000 sand paper, then light bleached 2 x 30 second. I'm not satisfied with the result, so I will use the insert aged by Big D. I therefore expected the crown from Adrian. I will have to cut the stem to fit the stem adapter. I will keep the aged dial, hands, spring bars and insert for Big Dazza. I know my work is perfectible, please give me your opinions. I have the other case to improve it. Now the pics !

Stunning beauty ! Envoyé de mon iPhone en utilisant Tapatalk

Stunning beauty ! Envoyé de mon iPhone en utilisant Tapatalk

Stunning dial ! Envoyé de mon iPhone en utilisant Tapatalk

Bourbon Envoyé de mon iPhone en utilisant Tapatalk

Great watch ! Nice work mate Envoyé de mon iPhone en utilisant Tapatalk

Thank you ! I'm happy with this result. It's not perfect, but it has character. I need one tip for replace the hands. I have no problem with hours and seconds, but minutes hands are bends every time. It does not matter for this 5512 aged hands, but I'm working on an Helenarou 6538 with nice gold hands. Envoyé de mon iPhone en utilisant Tapatalk

The lume application looks great, you could always give the dial another light dusting of matt varnish to take the gloss off the lume. Thanks ! The lume is less glossy now. I need a better lume kit. I will stay as is for the moment. Reworked the hands too, with steam vinegar and salt. Envoyé de mon iPhone en utilisant Tapatalk

[emoji106] Naked & Famous are my fav !