TeeJay Posted October 5, 2009 Report Share Posted October 5, 2009 This is not a final product, but an experiment to see if the project was worth pursuing... Personally, I'm happy with the results, so Phase Two of the project is now green-lighted, pending funds Link to comment Share on other sites More sharing options...
freddy333 Posted October 5, 2009 Report Share Posted October 5, 2009 Looks good, TeeJay. I know you are not usually after accuracy with your custom designs, but you might search out some of Rolex's wooden dials for inspiration (google or TZ would be good staring points). Link to comment Share on other sites More sharing options...
TeeJay Posted October 5, 2009 Author Report Share Posted October 5, 2009 Looks good, TeeJay. I know you are not usually after accuracy with your custom designs, but you might search out some of Rolex's wooden dials for inspiration (google or TZ would be good staring points). Thanks, Freddy I don't think I'm going to be able to get dial printing onto the dial, but I have plans to use a budget Milgauss or even maybe a Date Just for Phase Two, as that would enable me to keep a coronet marker at 12, which will at least allude to Rolex I'm going to experiment with varnishing, and maybe using a pin to try and get a more 3-D effect (by following the 'grain' and indenting it slightly), than the untreated vinyl which is all the dial suface is at the moment Link to comment Share on other sites More sharing options...
jmb Posted October 5, 2009 Report Share Posted October 5, 2009 Looks fantastic and very interesting from a "heretic's" point of view! The real wood veneers are not that expensive and might be an option as well >Rocklers venner assortment Link to comment Share on other sites More sharing options...
TeeJay Posted October 5, 2009 Author Report Share Posted October 5, 2009 Looks fantastic and very interesting from a "heretic's" point of view! The real wood veneers are not that expensive and might be an option as well >Rocklers venner assortment Thanks, and thanks for the link At the moment, I don't have access to the necessary tools to properly shape a dial, and then put in the holes for the markers to fit into, but a pocket knife, a pair of sharp scissors and a nappy pin are all I used to get the above result Link to comment Share on other sites More sharing options...
jmb Posted October 5, 2009 Report Share Posted October 5, 2009 Very well done with what you had at hand. I always look at new projects to justify new tool purchases to wife.gov, and sometimes it actually works! ;D But, then again, sometimes it don't... Link to comment Share on other sites More sharing options...
TeeJay Posted October 5, 2009 Author Report Share Posted October 5, 2009 Very well done with what you had at hand. I always look at new projects to justify new tool purchases to wife.gov, and sometimes it actually works! ;D But, then again, sometimes it don't... I think I only managed to get away with it because of the cost of the vinyl Link to comment Share on other sites More sharing options...
McRae Posted October 5, 2009 Report Share Posted October 5, 2009 TJ, the printable decals that you (Slartibartfast) used on the Tudor dial exist in a clear variant... Then you can print whatever you want and apply on the "wood". Link to comment Share on other sites More sharing options...
TeeJay Posted October 5, 2009 Author Report Share Posted October 5, 2009 TJ, the printable decals that you (Slartibartfast) used on the Tudor dial exist in a clear variant... Then you can print whatever you want and apply on the "wood". Thanks for the feedback, that's very true, and I had considered the decal method to get dial printing, but, I'm hoping to go for a really 3-D effect on the next dial by indenting over the 'grain' with a pin, and I think a decal might 'flatten' that too much... Link to comment Share on other sites More sharing options...
FxrAndy Posted October 5, 2009 Report Share Posted October 5, 2009 very interesting TJ Link to comment Share on other sites More sharing options...
TeeJay Posted October 5, 2009 Author Report Share Posted October 5, 2009 very interesting TJ Many thanks Link to comment Share on other sites More sharing options...
jfreeman420 Posted October 6, 2009 Report Share Posted October 6, 2009 The only way to get the raised print effect like Rolex has is to use silk screen with a thick metallic ink. You should use gold ink on this one. Rolex used to make a burl wood dial day date in gold circa 1980's. This would look sick in a vintage looking gold submariner or gmt case and bracelet. Maybe even a gold jubilee bracelet gmt plexi crystal. Now I got wood............... Link to comment Share on other sites More sharing options...
Bike Mike Posted October 6, 2009 Report Share Posted October 6, 2009 I like it! Nice job. What would really make that dial pop is to do the mid links in the bracelet as well! I forget, but one of the high end swiss luxury brands is doing wood mid-links in their new model. Link to comment Share on other sites More sharing options...
TeeJay Posted October 6, 2009 Author Report Share Posted October 6, 2009 The only way to get the raised print effect like Rolex has is to use silk screen with a thick metallic ink. You should use gold ink on this one. Rolex used to make a burl wood dial day date in gold circa 1980's. This would look sick in a vintage looking gold submariner or gmt case and bracelet. Maybe even a gold jubilee bracelet gmt plexi crystal. Now I got wood............... Sadly, I don't have access to screen printing techniques Nor even transfer printing... I'm definitely feeling the idea of a woodmariner, and that was definitely one of my choices for the project, but I wanted to keep the wood 'reserved for special occasions', rather than a daily beater, so what I'm going to go for, is a Presidential DateJust, with modern 'rectangular lume' markers, so it will be a primarily smart dress watch, but with the ability to be functional beyond that formal setting I like it! Nice job. What would really make that dial pop is to do the mid links in the bracelet as well! I forget, but one of the high end swiss luxury brands is doing wood mid-links in their new model. Thanks for the feedback, and I love the sound of wood as mid-links, I'll have to hit up Google to try and track down some photos Link to comment Share on other sites More sharing options...
Demsey Posted October 7, 2009 Report Share Posted October 7, 2009 Interesting. OT Are the replica 'Cousteau' IWC's real wood on the caseback? I believe the gens sport actual deck wood of the Calypso herself, then resined over. Wow. A piece of the Calypso. Seems sacrilegious, but considering what happened to the ship...................she lives. Perhaps beyond the realm of 'do-it-yourself' as surely it would require a laser precision die, but this project got me to thinking................ Link to comment Share on other sites More sharing options...
plaifender Posted October 7, 2009 Report Share Posted October 7, 2009 You tricked me with your post you sly dog! haha.. Put some lacquer on that and it would belong on the dash of an S-class! Link to comment Share on other sites More sharing options...
trailboss Posted October 7, 2009 Report Share Posted October 7, 2009 Thanks, and thanks for the link At the moment, I don't have access to the necessary tools to properly shape a dial, and then put in the holes for the markers to fit into, but a pocket knife, a pair of sharp scissors and a nappy pin are all I used to get the above result LOL, well done with the tools at hand. I would sugest having a ask at your local cabinet makers tho. They will have offcuts large enough for what you need that would be thrown away otherwise. That way you can get some nice exotic veneer to play with for little or nothing. There is proberly a laser cutting joint near you who could cut you a dial out of the veneer for 20 or 30 bucks. For not much more you could have a few done at once. Interesting. OT Are the replica 'Cousteau' IWC's real wood on the caseback? I believe the gens sport actual deck wood of the Calypso herself, then resined over. Wow. A piece of the Calypso. Seems sacrilegious, but considering what happened to the ship...................she lives. Perhaps beyond the realm of 'do-it-yourself' as surely it would require a laser precision die, but this project got me to thinking................ No, I seem to recall it's plastic wood. Nid not somone from here or RWI do a "real wood" mod on the Cousteau? I'd rather have a piece of the Calypso than a piece of the Titanic in my watch. Col. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now