HauteHippie Posted October 23, 2009 Report Share Posted October 23, 2009 (Courtesy of: http://watch-happening.blogspot.com/2009/10/new-watch-tag-heuer-monaco-v4-limited.html) Friday, October 9, 2009 NEW WATCH - TAG HEUER - MONACO V4 LIMITED EDITION - ACTUALLY, FINALLY, READY-FOR-PURCHASE So you've been saving up since 2004, and finally you have the 100,000 CHF (Swiss Francs) to purchase the TAG Heuer Monaco V4 Limited Edition. Piece 001/150 sold for 55,000 Euros at Only Watch 2009. Not as much as expected (by a whole 15,000 Euros), but still a huge amount for a TAG Heuer. Some History: In 2004, TAG Heuer unveiled the Monaco V4 Concept Watch, the world’s first watch with belt drives, linear mass and ball bearings. It's taken 5 long years, but on the eve of its 150th anniversary, TAG Heuer has unveiled to the world what many industry insiders said would never see the light of day: The Monaco V4 in commercial production. Double-patented Monaco V4, 100% TAG Heuer-made, outdoes its own legacy. A bold technical masterwork unlike any watch ever seen or imagined, it both exemplifies luxury Swiss watchmaking tradition at its finest, and completely turns that heritage upside down and inside out. Transmission Until the V4, all modern mechanical movements, regardless of their complications, were generally based on “classic” watchmaking components, most of which date back to the 18th and 19th century. The principal components of this traditional system are: an energy reserve, by means one or several springs; a transmission, using gears; and a regulatory function, usually organized around a recoil escapement. Gear transmission and automatic rewinding: the V4 team set these aside and started from scratch. The result is a complete paradigm-shift, 2 worldwide patents, and a completely new generation of mechanical movements. In a world first, TAG Heuer award-winning team of watch masters and engineers replaced the pinions and wheels of the traditional mechanical movement with a belt-driven transmission: a high-yield relay of 5 notched micro drive-belts whose tension is controlled by 2 turnbuckles. The transmission belts in polyether block amide have a 0.07mm section, about the same size as a single human hair, and are 10 times smaller than any belt ever manufactured. Unlike a traditional calibre, this modular synchronous drive belt system requires no extra gears to send motion from one point to another. More efficient — less vibrations, optimizing movement — and much easier to maintain, it allows power to be transmitted wherever it is required, allowing for more complications, with no obstacles. Energy The TAG Heuer team then garnered a second worldwide patent by revolutionizing the oscillating mass, which traditionally is superimposed on the movement and moves in a rotational manner. The Monaco V4 is the world’s first wristwatch with a linear mass, which is mounted on the world’s smallest ball bearings (2.2 to 4 mm diameter and a thickness of 0.6 to 1 mm). The 12g tungsten ingot doesn’t move back and forth but up and down on a track between the 2 pairs of v-shaped barrels in series, set in parallel and inclined at +/- 13°. A gear system on the long side of the weight engages a cogwheel and converts the linear motion into a rotating movement. Each barrel series stores 450g of energy for a total strength of 900g. Winner in its concept stage of many design prizes and awards, the Monaco V4 is the revolutionary new incarnation of the iconic Monaco — the audacious, square-faced watch first seen on Steve McQueen’s wrist in the 1970 race classic film Le Mans. The original Monaco’s big, squared-off case captured the imagination of a generation and signaled a complete break with conventional watchmaking aesthetics. It thus made sense to borrow from this iconic heritage to showcase TAG Heuer’s newest breakthrough in high-end luxury design. Like the original Monaco, the world’s first automatic chronograph with a micro-rotor (launched in 1969 by Jack Heuer, today TAG Heuer’s Honorary Chairman), the powerful new movement housed in the Monaco V4 is a tribute to the high-tech, high-performance world of motor racing. The name derives from the V-shaped platinum main plate on which the movement’s four spring barrels are mounted. The 2-by-2 belt series on ball bearings are angled at +/- 13 degrees, and look like the cylinders in a high-end motor-racing engine. The Monaco V4’s avant-garde look outside matches the revolutionary movement inside. Every complex surface and dihedral angle is fine polished to the highest haute-horlogerie standards. The beveled and arched sapphire crystal, manufactured in 3-D, curves down to join the sides. The case is in platinum 950, as is the caseback, which is trisected with 3 glass apertures. There is no reading dial per se — the polished beveled indexes are fixed directly to the bridges, with the small second hand distinctively off-centered at 4 o’clock. The ball bearing systems are visible on both sides, while the movement’s unique escapement and 3 transmission belts can be seen from the front, and the 2 barrel drives from the back. The stylish strap is in large-scale alligator, hand-stitched with a titanium insert. The overall design is breathtakingly new, unlike anything ever seen, yet the influence of Steve McQueen’s square-faced Monaco is apparent at a glance, as is the spirit and DNA. This is what truly drives TAG Heuer and the Monaco V4: audacity, performance, and a passionate devotion to the avant-garde. Above all, creating an entirely new paradigm for mechanical movement dynamics requires men and women of vision and passion, committed to pushing beyond limits. TAG Heuer’s best engineers and watchmakers, working with the inventor Jean-François Ruchonnet, begun delving into the fundamental concepts of mechanical watch movement, under the strictest terms of confidentiality. Then the Monaco V4 story became a real human saga involving an extraordinary team of dedicated thinkers, watch masters, engineers and craftsmen working in Switzerland but also collaborating with a unique international network drawn from renowned high-tech companies, universities and research institutes. The techniques used in the design, prototyping and production of the V4 are the same as those used to develop complex aerospace systems. Tools, techniques and expertise were drawn from an eclectic fusion of disciplines, such as the automobile and IT industries, applied mathematics, chemistry, climatology, computer engineering and micro-mechanical sciences. New TAG Heuer-designed machines and methods were specially created, including proprietary software (TAG Heuer is a pioneer in 3D modeling and digital synthesis), automated micro-couplers and rheologically controlled high-pressure injectors. Today, the Monaco V4 are hand-assembled at TAG Heuer by “Meilleur Ouvrier de France” watch master Denis Badin, thus bringing the timepiece full circle: from the most cutting-edge techniques of the present era to the most time-honored traditions of artisanal craftsmanship. This exclusive luxury edition of only 150 pieces in platinum 950, launched at the occasion of the 150th anniversary, will be sold at 100,000 CHF. Specifications The TAG Heuer Monaco V4 watch Limited edition of only 150 pieces in platinum Reference: WAW2170.FC6261 Movement: Automatic Belt-driven transmission watch Tungsten ingot linear mass 2 pairs of barrels in series, set in parallel and linked by belts Dial: 7 silver fine-brushed bridges with “haute horlogerie” hand-finishings Escapement and belt-driven transmission visible from the front Hand-applied faceted indexes Faceted polished Rhodium plated blue minute and hour hands with luminescent markers Blue small second hand at 4 o’clock Blue “V4” engraving Monochrome blue engraved TAG Heuer logo Case: Polished Platinum 950 case Case length: 48.90mm Case width: 40.5mm (43.40mm with Crown) Thickness: 17.10mm Mass: 226 grams Beveled sapphire crystal glass with double-sided anti-reflective treatment to ensure the best readability Sapphire case back in 3 sections Polished white gold crown at 3 o’clock Water resistance: 50 meters Strap: Blue alligator strap with hand-sewn blue stitching Folding buckle with safety push-buttons in Platinum 950 Availability 1st batch (75 pieces): November 2009 2nd batch (75 pieces): June 2010 Estimated MSRP: CHF 100,00 Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted October 23, 2009 Report Share Posted October 23, 2009 HOLY SH*T! that looks AMAZING! I want one NOW!!! Link to comment Share on other sites More sharing options...
Toadtorrent Posted October 23, 2009 Report Share Posted October 23, 2009 Not my aesthetic taste...but super cool design and engineering. Link to comment Share on other sites More sharing options...
Bike Mike Posted October 24, 2009 Report Share Posted October 24, 2009 About freaking time!!! Guess they got the issue resolved with the belts shredding. I remember first reading about this watch 5 years ago, when retail was predicted to be around $6K. So much for that number. Still, from a engineering stand point, the piece is amazing. Link to comment Share on other sites More sharing options...
offshore Posted October 24, 2009 Report Share Posted October 24, 2009 And I'll bet the rep makers already have it on the drawing board, (albeit with a conventional movement) May not prove that easy tho! bit like the "Freak" O/S Link to comment Share on other sites More sharing options...
HauteHippie Posted October 24, 2009 Author Report Share Posted October 24, 2009 Not my aesthetic taste...but super cool design and engineering. Yea, I hear you. Had they put black hands on it, I'd have been first in line to purchase. Link to comment Share on other sites More sharing options...
chubbchubb Posted October 25, 2009 Report Share Posted October 25, 2009 Great technical achievement Link to comment Share on other sites More sharing options...
LapTime Posted October 27, 2009 Report Share Posted October 27, 2009 Wicked cool...i would buy one in a heartbeat if i could. Wonder if this sort of tech would ever catch on. Probably not - considering how well established the traditional mechanical movement is - but its fun to think of the possibilities. The engineering involved in this is just tremendous...wow... Link to comment Share on other sites More sharing options...
Biodom Posted February 1, 2010 Report Share Posted February 1, 2010 I want one.....Hummmm...last price says 70 000 Link to comment Share on other sites More sharing options...
ChipSlap Posted February 1, 2010 Report Share Posted February 1, 2010 I want one.....Hummmm...last price says 70 000 Link to comment Share on other sites More sharing options...
Bike Mike Posted February 1, 2010 Report Share Posted February 1, 2010 Not with a truly functional movement. Would be a great thing though! Link to comment Share on other sites More sharing options...
strattakan Posted February 2, 2010 Report Share Posted February 2, 2010 21j rep in 3,2,1 ... Link to comment Share on other sites More sharing options...
Biodom Posted February 2, 2010 Report Share Posted February 2, 2010 In a word...no. Link to comment Share on other sites More sharing options...
Biodom Posted August 17, 2010 Report Share Posted August 17, 2010 They try to make a rep, but it sucks. http://www.sports-chaussures.net/product_info.php?cPath=220_754&products_id=29542 I think kingshowbox also have a rep but sucks too. Anyone see a good rep ? Link to comment Share on other sites More sharing options...
OSRep Posted August 17, 2010 Report Share Posted August 17, 2010 What a sight through the case back! LOve everything about this watch (except the price). I dont think repping it would do it justice. Link to comment Share on other sites More sharing options...
strattakan Posted August 18, 2010 Report Share Posted August 18, 2010 They try to make a rep, but it sucks. http://www.sports-chaussures.net/product_info.php?cPath=220_754&products_id=29542 I think kingshowbox also have a rep but sucks too. Anyone see a good rep ? man, what tha hell is this rep? LOL Honestly, it will never be properly repped. Link to comment Share on other sites More sharing options...
Biodom Posted August 18, 2010 Report Share Posted August 18, 2010 An awfull rep Link to comment Share on other sites More sharing options...
bluemax Posted August 20, 2010 Report Share Posted August 20, 2010 Hmm, can't see why this can not be replicated, including movement, if rep factories: - can dissasemble the original to see how it works - manufacture/purchase those tiny belts and bearings Awesome watch, technology-wise. Link to comment Share on other sites More sharing options...
lhooq Posted August 20, 2010 Report Share Posted August 20, 2010 They try to make a rep, but it sucks. http://www.sports-chaussures.net/product_info.php?cPath=220_754&products_id=29542 That's not a watch; that's a pachinko machine! Link to comment Share on other sites More sharing options...
Biodom Posted August 20, 2010 Report Share Posted August 20, 2010 Hmm, can't see why this can not be replicated, including movement, if rep factories: - can dissasemble the original to see how it works - manufacture/purchase those tiny belts and bearings Awesome watch, technology-wise. I don't know how they will find an original one, there is only 150 pieces and this watch cost 70 000 Link to comment Share on other sites More sharing options...
maxman Posted August 28, 2010 Report Share Posted August 28, 2010 That's not a watch; that's a pachinko machine! I was thinking the same thing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now