senator Posted December 17, 2009 Report Share Posted December 17, 2009 i send out my watch for some mods (AR, Lume, polish Cannon Pin, etc.). My question is, is the CG Pin polished or not on the real deal??? Thanks for your help guys. Link to comment Share on other sites More sharing options...
projectologist Posted December 17, 2009 Report Share Posted December 17, 2009 i send out my watch for some mods (AR, Lume, polish Cannon Pin, etc.). My question is, is the CG Pin polished or not on the real deal??? Thanks for your help guys. Then gen PAM127 comes with a polished CG pin. Link to comment Share on other sites More sharing options...
senator Posted December 17, 2009 Author Report Share Posted December 17, 2009 Then gen PAM127 comes with a polished CG pin. thanks for your help! Is this the right way for the polished pin? Link to comment Share on other sites More sharing options...
projectologist Posted December 19, 2009 Report Share Posted December 19, 2009 thanks for your help! Is this the right way for the polished pin? Needs to be flatter and more flush like this... (modded rep cg) Link to comment Share on other sites More sharing options...
milesd Posted December 19, 2009 Report Share Posted December 19, 2009 Great looking CG you've got there. We just got hammered with Snow here in PA, so I'm thinking of attempting to flatted my CG pin. Hope it turned out that good. Link to comment Share on other sites More sharing options...
PeteM Posted December 19, 2009 Report Share Posted December 19, 2009 Needs to be flatter and more flush like this... (modded rep cg) Is this mod something you would expect say with a DSN or Sead? or one that would be required Link to comment Share on other sites More sharing options...
projectologist Posted December 19, 2009 Report Share Posted December 19, 2009 (edited) Is this mod something you would expect say with a DSN or Sead? or one that would be required One that would be required if going for the 1:1 look. CG was rebrushed as well with progressive grits plus crown teeth edges sharpened and re-polished. Edited December 19, 2009 by projectologist Link to comment Share on other sites More sharing options...
senator Posted December 20, 2009 Author Report Share Posted December 20, 2009 One that would be required if going for the 1:1 look. CG was rebrushed as well with progressive grits plus crown teeth edges sharpened and re-polished. thanks P, i shipped the watch out now for some mods to Domi. It's the best way........ Link to comment Share on other sites More sharing options...
projectologist Posted December 20, 2009 Report Share Posted December 20, 2009 thanks P, i shipped the watch out now for some mods to Domi. It's the best way........ Is Domi in Europe? Can you PM me more info about his work? Thanks! Link to comment Share on other sites More sharing options...
senator Posted December 20, 2009 Author Report Share Posted December 20, 2009 Yes Domi is located in Gernany. For his work, visit the AP Section and look for my posts (Volcano after some Mods, RBII after some Mods). Domi is very trustful and His work is amazing!!!! Link to comment Share on other sites More sharing options...
projectologist Posted December 20, 2009 Report Share Posted December 20, 2009 Yes Domi is located in Gernany. For his work, visit the AP Section and look for my posts (Volcano after some Mods, RBII after some Mods). Domi is very trustful and His work is amazing!!!! Thank you Senator! Link to comment Share on other sites More sharing options...
carlitosway Posted December 21, 2009 Report Share Posted December 21, 2009 Needs to be flatter and more flush like this... (modded rep cg) can you make more photos from your CG and CG-lever end? Is The lever-end round like a gen ? Your CG ist the best REP-CG I've ever seen. Respect.!!!! Link to comment Share on other sites More sharing options...
PeteM Posted December 21, 2009 Report Share Posted December 21, 2009 can you make more photos from your CG and CG-lever end? Is The lever-end round like a gen ? Your CG ist the best REP-CG I've ever seen. Respect.!!!! Is it an EL CG? Link to comment Share on other sites More sharing options...
senator Posted December 22, 2009 Author Report Share Posted December 22, 2009 Needs to be flatter and more flush like this... (modded rep cg) is this standard AR or VAC? Looks very strong to me. DSN like...??!!! Link to comment Share on other sites More sharing options...
PeteM Posted December 22, 2009 Report Share Posted December 22, 2009 is this standard AR or VAC? Looks very strong to me. DSN like...??!!! I would be surprised if its DSN, the ones I see have a very strong blue tint on the glass at this angle. Link to comment Share on other sites More sharing options...
projectologist Posted December 23, 2009 Report Share Posted December 23, 2009 can you make more photos from your CG and CG-lever end? Is The lever-end round like a gen ? Your CG ist the best REP-CG I've ever seen. Respect.!!!! I spent a lot of time reworking the standard rep cg. Lever end (the part that contacts the crown) was rounded, then polished to reduce friction. AR was removed. Couple of more pics... Link to comment Share on other sites More sharing options...
HR911 Posted December 23, 2009 Report Share Posted December 23, 2009 I spent a lot of time reworking the standard rep cg. Lever end (the part that contacts the crown) was rounded, then polished to reduce friction. AR was removed. Couple of more pics... The watch looks awesome.... I have a PAM 127 too and have sent the CG to The Zigmeister to have a new flat pin inserted and lever stiffened up. How did you remove the Blue AR??....this would be my final thing to do..... Thanks in advance... Link to comment Share on other sites More sharing options...
PeteM Posted December 23, 2009 Report Share Posted December 23, 2009 The watch looks awesome.... I have a PAM 127 too and have sent the CG to The Zigmeister to have a new flat pin inserted and lever stiffened up. How did you remove the Blue AR??....this would be my final thing to do..... Thanks in advance... I was looking for a tip for this and found a few answers - Some use a brillo pad or scotch brite (but only if its crystal) another suggested acetone, and another a buffer wheel and paste. I found a guy who suggested Stainless steel polish fortunately I had some in the cupboard and the AR came straight off no problem, that was on DSN's AR. It also doesnt damage the case if you just want to do the outside of the crystal. Link to comment Share on other sites More sharing options...
HR911 Posted December 23, 2009 Report Share Posted December 23, 2009 Hi Pete, Thanks for your reply....you have a beautiful watch too. My AR coating will be on the inside though won't it?....I thought the fiddy's all had the AR coating on the inside only? I can't even get the movement out at the moment as my screwdriver set doesn't seem to suitable. Link to comment Share on other sites More sharing options...
PeteM Posted December 23, 2009 Report Share Posted December 23, 2009 Hi Pete, Thanks for your reply....you have a beautiful watch too. My AR coating will be on the inside though won't it?....I thought the fiddy's all had the AR coating on the inside only? I can't even get the movement out at the moment as my screwdriver set doesn't seem to suitable. Thanks mate, Your right with the AR, I just meant generally with the outside. You need to get to Watchbitz in the trade section for all your screwdriver needs. The movement seems simple to remove and is shown in the tutorials on RG. I couldnt find it on here. My mate did it and he isnt a DIY guy, remove CG, the back screwed off using a guys tip on here using a scrunched up ball of sticky tape pressed firmly onto CB, Then turn screw near crown pin about a turn and a half this releases the crown from the movement and case (dont go to far with turns as this engages keyless operation apparently) Then there are two screws on the edge of the movement about 11 oclock and 5 oclock these hold a bracket that holds movement to inside of case. Remove movement wearing some rubber gloves just prise it out gently place away carefully and then remove AR as suggested. Then repeat actions in reverse. Anyway thats a quick answer but trust me it is easy just take your time and be careful not to lose screws etc. Have a good work surface with a cloth etc. I am sure other guys on here can explain much better than me but thats how we done it. Apologies if this is a thread crap Link to comment Share on other sites More sharing options...
HR911 Posted December 23, 2009 Report Share Posted December 23, 2009 Hi Pete, Thanks very much but I've found a service by Fine DD on RWI that will remove the AR and likely put his own AR on. So happy days! Link to comment Share on other sites More sharing options...
PeteM Posted December 24, 2009 Report Share Posted December 24, 2009 Hi Pete, Thanks very much but I've found a service by Fine DD on RWI that will remove the AR and likely put his own AR on. So happy days! If your in EU dont forget Domi Link to comment Share on other sites More sharing options...
z3k0 Posted December 24, 2009 Report Share Posted December 24, 2009 ... CG was rebrushed as well with progressive grits plus crown teeth edges sharpened and re-polished. Really admire your CG work - could you please explain how do you "progress" grits, do you go from finer grit to more coarse ones or other way round, and do you polish first ? regards Link to comment Share on other sites More sharing options...
projectologist Posted December 24, 2009 Report Share Posted December 24, 2009 Really admire your CG work - could you please explain how do you "progress" grits, do you go from finer grit to more coarse ones or other way round, and do you polish first ? regards 180 to 360. Strips of sandpaper were glued to a flat surface and the cg was brushed in one direction only (NEVER go back and forth) using a strip of wood as a guide. The cg is laid on the sandpaper strip with the feet against the guide, pressing down on the cg with my thumb and forefinger drawing the cg towards me with even pressure. The guide is the key to having the brush strokes consistent and perfectly parallel to the case. The pin was flattened and polished by a machinist friend. Link to comment Share on other sites More sharing options...
tessa Posted May 24, 2011 Report Share Posted May 24, 2011 got an email from DSN today that he will maybe soon have swiss mov back in stock again on pam127/217 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now