Martyd3 Posted March 10, 2010 Report Share Posted March 10, 2010 Had anyone tried to slightly widen a date window using a jewelers file? Just wanted to know if I was looking for trouble trying to do so Thanks. Marty Link to comment Share on other sites More sharing options...
Bike Mike Posted March 10, 2010 Report Share Posted March 10, 2010 As in for a A7750 dial to be used with the 7753 movement? "Slightly" is about 2-3mm. Your DW will be so wide that you will see the teeth of the Date Wheel. Here is a overlay of a Pam 250 I did with 7753 and A7750 w/ 3,6,9 subdial layout. The "20" in the DW is the A7750. Link to comment Share on other sites More sharing options...
maxman Posted March 10, 2010 Report Share Posted March 10, 2010 As in for a A7750 dial to be used with the 7753 movement? "Slightly" is about 2-3mm. Your DW will be so wide that you will see the teeth of the Date Wheel. Here is a overlay of a Pam 250 I did with 7753 and A7750 w/ 3,6,9 subdial layout. The "20" in the DW is the A7750. Nice work Mike, must be nice to have talent I have the same rep and It's one of my favorites, SDW and all. It was my first auto so It Is near and dear to my heart It Is also a very good rep Imho. Again nice work Mike Mike Link to comment Share on other sites More sharing options...
ubiquitous Posted March 10, 2010 Report Share Posted March 10, 2010 I had to do this on my Inge to get the date properly centered: If you go at it from the back side and angle it just right, it's not bad; touch up with a little black paint and what you see above is the finished result. Granted, I only had to remove a very small, minimal amount... Link to comment Share on other sites More sharing options...
Martyd3 Posted March 10, 2010 Author Report Share Posted March 10, 2010 I had to do this on my Inge to get the date properly centered: If you go at it from the back side and angle it just right, it's not bad; touch up with a little black paint and what you see above is the finished result. Granted, I only had to remove a very small, minimal amount... That is exactly what I need to do. I just need to take a little of of one side of the window to center the date. The particular dial is a Rolex and under a cyclops. I hope it works Link to comment Share on other sites More sharing options...
maxman Posted March 10, 2010 Report Share Posted March 10, 2010 I had to do this on my Inge to get the date properly centered: If you go at it from the back side and angle it just right, it's not bad; touch up with a little black paint and what you see above is the finished result. Granted, I only had to remove a very small, minimal amount... I did go at It from the back side and I thought my angle was spot on. Well she still wont talk to me. Link to comment Share on other sites More sharing options...
ubiquitous Posted March 11, 2010 Report Share Posted March 11, 2010 That is exactly what I need to do. I just need to take a little of of one side of the window to center the date. The particular dial is a Rolex and under a cyclops. I hope it works Marty- Be careful with that one. Since Rolex dials have a bevel around the date window, and because it's under a cyclops, any room for error goes out the window as those two factors will only pronounce the details. I did go at It from the back side and I thought my angle was spot on. Well she still wont talk to me. Try more lube next time. Just when you think you have enough, add more It's critical for those kinds of situations... Link to comment Share on other sites More sharing options...
hackR Posted March 11, 2010 Report Share Posted March 11, 2010 oooooh - this is cool info...my 3-6-9 old skool arabic dial Navitimer has its date at 4.5...it comes with a small date window compared to the gen and a real lousy dw font...i picked up an eta 4.5 datewheel and plan to swap the old one out...it still won't be like the gen Navi's dw, but a step closer...it could benefit from a slight window expansion, too...but i do wonder if it might be noticeable on a dial that is smooth/matte versus patterned...but then again, the Navi dial is pretty busy, so it might not be that noticeable...hmmmmm...another potential project...R Link to comment Share on other sites More sharing options...
Bike Mike Posted March 11, 2010 Report Share Posted March 11, 2010 Nice work Mike, must be nice to have talent I have the same rep and It's one of my favorites, SDW and all. It was my first auto so It Is near and dear to my heart It Is also a very good rep Imho. Again nice work Mike Mike Thank you sir! Really nothing but a little PS. Link to comment Share on other sites More sharing options...
hackR Posted March 11, 2010 Report Share Posted March 11, 2010 Thank you sir! Really nothing but a little PS. PS?!?!?!...i thought that was a really bad crystal install, Mike?... Link to comment Share on other sites More sharing options...
krpster Posted March 11, 2010 Report Share Posted March 11, 2010 Isn't there just a little spring that is responsible for positioning of the date wheel? Can't seem to find a picture of what I mean. To re-center the date wheel could you not adjust the keeper spring? Seems a little less....permanent.....if something should go wrong. Link to comment Share on other sites More sharing options...
gillorin Posted March 11, 2010 Report Share Posted March 11, 2010 Isn't there just a little spring that is responsible for positioning of the date wheel? Can't seem to find a picture of what I mean. To re-center the date wheel could you not adjust the keeper spring? Seems a little less....permanent.....if something should go wrong. No... It's an actual wheel that is solidly in place, with teeth on the underside driven by a gear... there is no "slightly" moving the position unfortunately. Link to comment Share on other sites More sharing options...
sander Posted March 11, 2010 Report Share Posted March 11, 2010 Try more lube next time. Just when you think you have enough, add more It's critical for those kinds of situations... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now