tedbearz Posted March 21, 2006 Report Share Posted March 21, 2006 Without opening them to look at the movements? Link to comment Share on other sites More sharing options...
dadog13 Posted March 21, 2006 Report Share Posted March 21, 2006 i don't think it is possible...i have the 029 with asian mvt...case and dial are the same...the only thing that maybe could be different is the crown guard, but i am not sure... now, i am really interested to see an answer from an expert... Link to comment Share on other sites More sharing options...
dachshund Posted March 21, 2006 Report Share Posted March 21, 2006 Don't know about the expert part, but if you pull the crown out to the time set position and move the hands either clockwise or anti, on all Asians I've ever seen, the hands will move about twice as far per revolution of the crown than an ETA will. Link to comment Share on other sites More sharing options...
MADRED7 Posted March 21, 2006 Report Share Posted March 21, 2006 Of course you can easily see and feel the difference, but have to have it in your hands. The asian movement allows the GMT-hand to set the GMT time smooth and easy with. The swiss ETA movement sets the GMT-hand by jumping in 1-hour steps, the GMT-hand will allways equal the normel minutes shown with the minutes hands. So minute hand and GMT-hand are coordinated, on the asian movement you can set the time only correct when showing the full hour. Hard to explain, hope I come through to you. Cheers, Theo P.S.: Wow, post # 1 at RWGII Link to comment Share on other sites More sharing options...
robideaux Posted March 22, 2006 Report Share Posted March 22, 2006 (edited) the easiest way is to look at the casebacks. the asian gmt caseback is wrong for a couple of reasons: 1) it has more depth to accommodate the thicker movement. 2) the production numbers on the caseback are incorrect. here are some pictures to illustrate. first, the 2893-2 swiss: next, the 2836 swiss: finally, the asian 21J: the attatched file is a pic of a gen 29B caseback. hope i've been some help. one foot note: i just noticed that the pic of the 2892-2 rep caseback is incorrect, but this is not the case for mine. my 2892-2 rep has the back in picture #2, which is identical to gen (also my # is somewhat unique, b072/500). it could be a dealer discrepancy, since these photos are from josh, and i got my gmt from eddie. also, i've opened the back to verify the proprer movt. lies inside. Edited March 22, 2006 by robideaux Link to comment Share on other sites More sharing options...
Chronus Posted March 22, 2006 Report Share Posted March 22, 2006 I've been told that the factory has stopped producing PAM 029 s and 063s with ETA 2893-2 movement, so get them while you still can! Link to comment Share on other sites More sharing options...
lucky Posted March 22, 2006 Report Share Posted March 22, 2006 my back is indentical to # 2 . It also says 100/500 for the number like the one in photo. What is the correct and best one to have Link to comment Share on other sites More sharing options...
yodaddynukka Posted March 22, 2006 Report Share Posted March 22, 2006 i just got my 2893-2 063 from EL yesterday and it has the 100/500 caseback. Link to comment Share on other sites More sharing options...
Guest overboosted Posted March 22, 2006 Report Share Posted March 22, 2006 Of course you can easily see and feel the difference, but have to have it in your hands. The asian movement allows the GMT-hand to set the GMT time smooth and easy with. The swiss ETA movement sets the GMT-hand by jumping in 1-hour steps, the GMT-hand will allways equal the normel minutes shown with the minutes hands. So minute hand and GMT-hand are coordinated, on the asian movement you can set the time only correct when showing the full hour. Hard to explain, hope I come through to you. Cheers, Theo P.S.: Wow, post # 1 at RWGII This is all you need! Link to comment Share on other sites More sharing options...
Chronus Posted March 22, 2006 Report Share Posted March 22, 2006 i just got my 2893-2 063 from EL yesterday and it has the 100/500 caseback. me too! Hope EL just changed the case-back for better accuracy! Link to comment Share on other sites More sharing options...
tescardo Posted March 24, 2006 Report Share Posted March 24, 2006 (edited) Of course you can easily see and feel the difference, but have to have it in your hands. The asian movement allows the GMT-hand to set the GMT time smooth and easy with. The swiss ETA movement sets the GMT-hand by jumping in 1-hour steps, the GMT-hand will allways equal the normel minutes shown with the minutes hands. So minute hand and GMT-hand are coordinated, on the asian movement you can set the time only correct when showing the full hour. Hard to explain, hope I come through to you. Cheers, Theo P.S.: Wow, post # 1 at RWGII Do you know if there is a difference between the 2893 and the 2836 version ? Regards Edited March 24, 2006 by tescardo Link to comment Share on other sites More sharing options...
Davey Posted March 24, 2006 Report Share Posted March 24, 2006 The ETA movement will "wind better", when setting the time one revolution of the crown = approx one revolution of the minute hand, with the asian movements generally the gearing is alot higher and the minute hand will do nearly two revolutions for one revolution of the crown. The GMT hand setting on asian movements is normally rather jerky to where as on the ETA its smooth and precise. Link to comment Share on other sites More sharing options...
tescardo Posted March 24, 2006 Report Share Posted March 24, 2006 (edited) The ETA movement will "wind better", when setting the time one revolution of the crown = approx one revolution of the minute hand, with the asian movements generally the gearing is alot higher and the minute hand will do nearly two revolutions for one revolution of the crown. The GMT hand setting on asian movements is normally rather jerky to where as on the ETA its smooth and precise. Thx Davey, do you also know, if the 2836 is also jumping in 1-hour steps like the 2893. Regards Edited March 24, 2006 by tescardo Link to comment Share on other sites More sharing options...
Davey Posted March 24, 2006 Report Share Posted March 24, 2006 (edited) modifed 2836 SHOULD NOT jump in steps, they are modified to run directly from the drive for the day mechanism which is a smooth, I would assume 2893 is the same, but I've not actually seen a GMT 2893. Edited March 24, 2006 by Davey Link to comment Share on other sites More sharing options...
Indyclmbr Posted March 24, 2006 Report Share Posted March 24, 2006 modifed 2836 SHOULD NOT jump in steps, they are modified to run directly from the drive for the day mechanism which is a smooth, I would assume 2893 is the same, but I've not actually seen a GMT 2893. On the 2893, the GMT hand does in fact "jump" when adjusted, but them moves smoothly as it keeps time. Climb on. Link to comment Share on other sites More sharing options...
Finepics Posted March 24, 2006 Report Share Posted March 24, 2006 Do you know if there is a difference between the 2893 and the 2836 version ? Regards The 2893 is a true GMT movt (and power reserve with an added module). The 2836 has day and date and is not designed to be a GMT but is adapted by fitting a hand to the day wheel - does the same job but not as well as a proper GMT movt. If you can get the 2893 it is a must. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now