Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Vintage Watches And Super Lume


TJGladeRaider

Recommended Posts

Ideally I would like 3 hours worth on every one of my watches (enough to make it through a movie).

Get a casio digital for the movies!!!

Back to the lume, I guess that with vintage watches it would look out of place wouldn't it? You guys probably know better than me but would re-luming a gen vintage watch have an effect on the value?

Link to comment
Share on other sites

Some of the folks that are doing mods have come up with a vintage lume that has just a little glow, not like super lume. i have it on my 1665 and it will glow for a couple of hours very faintly.

I have a couple of Doxas from the 1970's that when exposed to very bright light will still glow a little, however my gen. GMT 16750 from 1988's lume is dead as a door[censored]

that is my preference for vintage Reps, just a little glow. Firefly vs Q-beam!!

Link to comment
Share on other sites

Maybe The Zigmeister and others have been doing this as well. I don't know, but I've been able to come up with a blend of Superluminova the resembles vintage tritium and vintage radium and yet glows almost as well as C3. I've been luming with superluminova for quite awhile. Its great stuff, but you can ruin a dial if you so much as blink at the wrong time.

I posted some pictures of two original Tudor subs that have the vintage "Tritium" look and a 60s Certina that I relumed with the vintage "Radium" look.

iwc3

If anyone is interested you can PM me. I have to tell you though, that I am pretty busy, and the turnaround time is about 4 weeks.

post-1626-1158609225_thumb.jpgpost-1626-1158609245_thumb.jpgpost-1626-1158609269_thumb.jpgpost-1626-1158609290_thumb.jpg

post-1626-1158609381_thumb.jpgpost-1626-1158609353_thumb.jpgpost-1626-1158610081_thumb.jpg

Link to comment
Share on other sites

Does rolex even use superluminova ?

i was on the impression gen weren't glowing "that" much.

I olny have a vintage T swiss T oysterdate, that of course only has a very little glow (eyes gotta be used to the dark to see it)

But looking at somes of my friends newer model (mid 90's) it don't glow like a torch.

Link to comment
Share on other sites

As I understand it, Rolex moved from Tritium to Superluminova sometime in the 90s. They use white C0 or C1 Superluminova. Though it glows all night expecially in the big round and trianglular indices... though it does glow all night, it glows weaker than most of the other SL colors. Of course C3 is the champ.

iwc3

Link to comment
Share on other sites

I'm afraid we are all missing Bills point, dead lume is fine for a collectors vintage watch but if this is your everyday wearer.......in other words probably purchased new and always serviced by an AD, wouldn't they have relumed it every time it was needed?

Ken

Link to comment
Share on other sites

To stick to the subject i would like my reps to look like aged ones, after all we try very much to be as clause as possibl with every other little detail.

For my old Oysterdate that i will have to get serviced one day, i dunno what i will do, it's not like if it was a rolex that can take values among colector in aging.

I Have a friends who have an early GMT 1 the lume on the hands are really aged, like almost cracking, he had to get the watch serviced once 3 years ago.

Rolex whanted to change the hands an corect the dial, but he was able to say no, and they ony did the movement, he was still pisseded because they changed the clasp on the riveted bracelet though, and it wasn't the same model than the old one.

Link to comment
Share on other sites

I'm afraid we are all missing Bills point, dead lume is fine for a collectors vintage watch but if this is your everyday wearer.......in other words probably purchased new and always serviced by an AD, wouldn't they have relumed it every time it was needed?

Ken

My point exactly.

Does someone make a lume kit where an old drunk with shakey hands can get the relume done while avoiding the snakes, and ignoring the spyders on the walls?

I want my vintages to GLOW.

As for the watch vintagizers, I simply cannot relate. To see you what some of you guys do to nice looking watches strikes me as, well . . . since I like so many of you, let's just say, "peculiar."

Would you take my 1866 Henry lever action rifle, scratch up the beautiful brass receiver and beat up that perfect walnut burl stock - no, don't tell me, I don't wanna know.

Bill

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up