bklm1234 Posted September 30, 2006 Report Share Posted September 30, 2006 http://www.tztoolshop.com/page80.html#796 $34.95. Is it good? Thanks. Link to comment Share on other sites More sharing options...
ubiquitous Posted October 1, 2006 Report Share Posted October 1, 2006 In my opinion, they're okay, but not great. They're a little pricey for what they are, they require some work to get them to fit properly, and in the end, they still don't look right. Better to spend a little more on a genuine insert, and do it right. Link to comment Share on other sites More sharing options...
fellfell Posted October 1, 2006 Report Share Posted October 1, 2006 In my opinion, they're okay, but not great. They're a little pricey for what they are, they require some work to get them to fit properly, and in the end, they still don't look right. Better to spend a little more on a genuine insert, and do it right. Sorry, sir, but where is possible in internet (exluse ebay very dangerous because to great number of sellers they say “original” but is possible not to verify) to buy a genuine Rolex bezel insert ? Thanks Link to comment Share on other sites More sharing options...
alligoat Posted October 2, 2006 Report Share Posted October 2, 2006 I bought the 16610 bezel insert from Lee Raymond Jewelers for $17.95 last month and put it in my CN 16610 rep and almost got it to press fit in. It was just a tad too big, but rather than try to file it down, I glued it in w/ contact cement and just clamped it while it dried. Half the price of Ofrei's! Link to comment Share on other sites More sharing options...
MechWatch Posted October 2, 2006 Report Share Posted October 2, 2006 I bought the 16610 bezel insert from Lee Raymond Jewelers for $17.95 last month and put it in my CN 16610 rep and almost got it to press fit in. It was just a tad too big, but rather than try to file it down, I glued it in w/ contact cement and just clamped it while it dried. Half the price of Ofrei's! How is the pearl? Did you have to reduce the thickness? thanks. Link to comment Share on other sites More sharing options...
rocky1552 Posted October 2, 2006 Report Share Posted October 2, 2006 I bought the 16610 bezel insert from Lee Raymond Jewelers for $17.95 last month and put it in my CN 16610 rep and almost got it to press fit in. It was just a tad too big, but rather than try to file it down, I glued it in w/ contact cement and just clamped it while it dried. Half the price of Ofrei's! You have a link for that site? I did a search for "Lee Raymond Jewelers" but could not find any bezel inserts from any of the sites I looked at. Link to comment Share on other sites More sharing options...
TJGladeRaider Posted October 2, 2006 Report Share Posted October 2, 2006 You have a link for that site? I did a search for "Lee Raymond Jewelers" but could not find any bezel inserts from any of the sites I looked at. It is RaymondLeeJewelers.com and tell them Bill from Naples, FL recomended them! LOL I just bought a couple of dozen inserts from them and they fit fine. Bill Link to comment Share on other sites More sharing options...
x86uops Posted October 2, 2006 Report Share Posted October 2, 2006 You have a link for that site? I did a search for "Lee Raymond Jewelers" but could not find any bezel inserts from any of the sites I looked at. http://www.raymondleejewelers.com/ Then go to "watches" , "watch accessories" Link to comment Share on other sites More sharing options...
rocky1552 Posted October 2, 2006 Report Share Posted October 2, 2006 It is RaymondLeeJewelers.com and tell them Bill from Naples, FL recomended them! LOL I just bought a couple of dozen inserts from them and they fit fine. Bill Think I will order from here but before I do I just wanted to make sure the 4 is more pointy on the top like on the modern subs. Link to comment Share on other sites More sharing options...
alligoat Posted October 2, 2006 Report Share Posted October 2, 2006 Their 4 is boxy like the old model bezel insert- pre 2005 or so. But I was happy w/ the pearl and it was an improvement over what I had. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now