cougar1 Posted March 21, 2011 Report Posted March 21, 2011 The logo positioning actually looks very good on that!...what is it with the factories, even when they temporarily fcuk something up, they [censored] everyone off by fixing something else that has been bugging the rep world since the release of this PO?
S3g0y Posted March 26, 2011 Report Posted March 26, 2011 (edited) Below is a QC picture of new 42mm PO from Tony. It looks like they finally fixed the logo sitting to close to the letters issue. I can't wait to have it at home Edited March 26, 2011 by segoy
KerryB Posted April 5, 2011 Report Posted April 5, 2011 Below is a QC picture of new 42mm PO from Tony. It looks like they finally fixed the logo sitting to close to the letters issue. I can't wait to have it at home please share with us the rest of your QC pics I just ordered one and my QC pics should be coming soon
Pakz Posted April 5, 2011 Report Posted April 5, 2011 And I've got the impression that the crown is slightly smaller than on the usual v5... Looks like they've improved the few remaining flaws on that one!!!
S3g0y Posted April 5, 2011 Report Posted April 5, 2011 (edited) It's on my wrist today I think there's not a lot of things to improve right now. Look: Edited April 5, 2011 by segoy
Pakz Posted April 5, 2011 Report Posted April 5, 2011 And I've got the impression that the crown is slightly smaller than on the usual v5... Looks like they've improved the few remaining flaws on that one!!! My bad... Crowns are the same as the "old" v5... Still great watch! Congrats', segoy!
ruelcortez Posted April 5, 2011 Report Posted April 5, 2011 Hi mate that's pretty close to the gen one. I am planning to get one as well from either Trusty guy or Pure time. Quick question for you, they mentioned this UPO version now uses 316F Stainless Steel which different from the older one being 316L. Accroding to some reviews, its brighter and bit shinier that previous one. How was it for you? they said the bracelet looked like gen now? Would you also be able to post pictures of the clasp? thank you
Keentje Posted April 5, 2011 Report Posted April 5, 2011 (edited) That one looks really good and just triggered me to buy this one again ( My narikaa version died ). The gap between the omega logo and the text looks really nice and the pearl looks really nice as well. Can you maybe give some more information about what you paid and maybe some lume shots as well? You can also PM me ofcourse and I can not go on the site from Tony?! Edited April 5, 2011 by Keentje
S3g0y Posted April 6, 2011 Report Posted April 6, 2011 No idea about the steel version It's DG4813 movement version - so called el cheap'o ;-) I paid $128.
Keentje Posted April 6, 2011 Report Posted April 6, 2011 I want a 21J as well, but I can't seem to find a 42mm 21j on asian7750.com ? How did you get the watch then?
Pakz Posted April 6, 2011 Report Posted April 6, 2011 I want a 21J as well, but I can't seem to find a 42mm 21j on asian7750.com ? How did you get the watch then? Got mine from Josh...
S3g0y Posted April 6, 2011 Report Posted April 6, 2011 I want a 21J as well, but I can't seem to find a 42mm 21j on asian7750.com ? How did you get the watch then? Don't look at the website. Just drop Tony an email about what you need.
pferdekuchen Posted April 9, 2011 Report Posted April 9, 2011 Congrats to your new watch! Could you please pm me Tony's email?
MLAM Posted April 10, 2011 Report Posted April 10, 2011 Don't look at the website. Just drop Tony an email about what you need. Hi there, I've spoken to Tony and he says he cannot supply any due to a dial issue, it miffs me a bit that you have a 42mm Planet Ocean with el cheapo movement which is what I asked for albeit with Pumpkin Bezel...... Does Tony not want my business?
S3g0y Posted April 11, 2011 Report Posted April 11, 2011 The orange bezel version has also other dial (orange numbers). I also asked Tony about this version and the answer was the same.
digimon Posted April 11, 2011 Report Posted April 11, 2011 (edited) This is a dumb question, but how do I buy from Josh at Perfect Clones? Is it from perfect-clones.net? Or do I order via a PM like most other dealers. I see his name popping up all the time, but can't figure out how to place an order. ***** nevermind. I think I figured it out. If I am not mistaken, it's Joshua on the trusted dealers site, correct? Edited April 11, 2011 by digimon
Pakz Posted April 11, 2011 Report Posted April 11, 2011 This is a dumb question, but how do I buy from Josh at Perfect Clones? Is it from perfect-clones.net? Or do I order via a PM like most other dealers. I see his name popping up all the time, but can't figure out how to place an order. ***** nevermind. I think I figured it out. If I am not mistaken, it's Joshua on the trusted dealers site, correct? Yep, you're not mistaken, that's the one!
PostModernPrimate Posted April 20, 2011 Report Posted April 20, 2011 (edited) Yep, you're not mistaken, that's the one! Sorry, newbie here. I had the same question about ordering from Josh, but I can't figure out where this "trusted dealers" site is. And would someone be so kind as to fill me in on what this "deal" watch from Josh is? Thanks! Edited April 20, 2011 by PostModernPrimate
DP8 Posted April 20, 2011 Report Posted April 20, 2011 I am kinda disappointed now at my 5th gen, the logo seems to be MUCH lower than yours. And Josh told me that's how it's supposed to be and is what the gen looks like....was that a lie? Here's mine:
S3g0y Posted April 26, 2011 Report Posted April 26, 2011 It seems that you have the earlier version of the dial. But I suppose that only the white numbers dials are updated so far. I'm not sure if it's possible to get the orange bezel version of PO with an updated logo at the moment.
cib0rgman Posted April 26, 2011 Report Posted April 26, 2011 Below is a QC picture of new 42mm PO from Tony. It looks like they finally fixed the logo sitting to close to the letters issue. I can't wait to have it at home how much is this one and does it have the ETA Swiss, ETA clone, or Chinese movement? Thanks
tshoot Posted April 26, 2011 Report Posted April 26, 2011 (edited) Here is a picture of the Gen 42mm PO I sold. What do you think of the logo positioning compared to the rep above? Edited April 26, 2011 by tshoot
tshoot Posted April 26, 2011 Report Posted April 26, 2011 The rep logo looks to be sitting lower and is thinner but we might be splitting hairs when looking from a distance.
trekracer20 Posted May 17, 2011 Report Posted May 17, 2011 Sorry, newbie here. I had the same question about ordering from Josh, but I can't figure out where this "trusted dealers" site is. And would someone be so kind as to fill me in on what this "deal" watch from Josh is? Thanks! You may have found this out if you've explored this site more, but be aware that Josh's site right now is 1-pc8838.com. Perfect-clones.net is, amusingly enough, a fake site for reps. I'm he still sells fine reps...but it's not Josh, though he'll tell you it is if you ask him.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now