prdubis Posted April 20, 2011 Report Posted April 20, 2011 Hi mates, Just found this in my parts box: Nice tall coronet, but is it gen? I tried to screw it on a gen tube and it perfectly fitted. Any ideas? Thanks!
woof* Posted April 20, 2011 Report Posted April 20, 2011 Can tell alot more by the inside edge, need a pic of the inside
freddy333 Posted April 20, 2011 Report Posted April 20, 2011 Nice tall coronet, but is it gen? I tried to screw it on a gen tube and it perfectly fitted. I agree -- hard to tell with these pics, but it looks a bit too wide.
woof* Posted April 20, 2011 Report Posted April 20, 2011 Here is a really good thread on how to tell and what to look for
praetor Posted April 20, 2011 Report Posted April 20, 2011 doesn't look gen. too tall and seems machined
freddy333 Posted April 20, 2011 Report Posted April 20, 2011 Et voilà: If you have the owner's manual for your camera, read the section on Macro. This will allow you to take clear/sharp close-ups of the crown, especially the bottom side.
prdubis Posted April 20, 2011 Author Report Posted April 20, 2011 If you have the owner's manual for your camera, read the section on Macro. This will allow you to take clear/sharp close-ups of the crown, especially the bottom side. Sorry F, I wasn't at home and I shot the pics with my iPhone...I usually use a Lumix TZ10 and it's much better!
highoeyazmuhudee Posted April 21, 2011 Report Posted April 21, 2011 (edited) the gens usually have a hex shape around the base of the stem tube. might be off a PT Edited April 21, 2011 by highoeyazmuhudee
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now