conseal Posted August 19, 2011 Report Share Posted August 19, 2011 Hi guys, I've bought taka crystal from private seller, but my watchsmith said the crystal was 0.2mm too small to fit on the 3717 case. He could glue them permanently, but he reckon there might be rubber sealant that was made for the crystal. I am not 100% sure if the crystal came from taka, what are my options? Should I try to get the rubber sealant? Cheers Link to comment Share on other sites More sharing options...
tomhorn Posted August 19, 2011 Report Share Posted August 19, 2011 My Taka crystal fits perfectly as far as I can tell, although I didn't install it myself. I did not send anything other than the crystal to Vac, and he did not report any issues. Link to comment Share on other sites More sharing options...
Texski Posted August 19, 2011 Report Share Posted August 19, 2011 You can use a gasket and UV glue. Press the crystal and gasket in first, then apply glue. Use a small UV lamp to cure, or set it in direct sunlight (it will take longer, make sure it isn't dusty). Mike Link to comment Share on other sites More sharing options...
HauteHippie Posted August 19, 2011 Report Share Posted August 19, 2011 Shouldn't need glue, but if for some reason you use glue... keep all the glue off the AR. Link to comment Share on other sites More sharing options...
Texski Posted August 19, 2011 Report Share Posted August 19, 2011 ... keep all the glue off the AR. +1. The glue comes in a syringe ... this is not something to do after a pot of coffee. Keep the needle between the crystal and the bezel, and apply evenly. I think there is a GS crystal adhesive, too, no UV needed. Link to comment Share on other sites More sharing options...
chefcook Posted August 23, 2011 Report Share Posted August 23, 2011 Sure that the crystal gasket is not AWOL? Link to comment Share on other sites More sharing options...
watcher Posted October 26, 2011 Report Share Posted October 26, 2011 I have the same problem and I'm guessing like me you have a crystal for the Topgun which is slightly smaller than the 3717 crystal. I bought a Taka Topgun type thinking it would fit in my 3717 but it is smaller and slightly thicker too(not a problem). Not sure if Takashi is still arouind, he has not looged into RWI since Feb this year! Link to comment Share on other sites More sharing options...
prdubis Posted October 26, 2011 Report Share Posted October 26, 2011 3717 xtals are out of stock, I bet you have a Top Gun crystal :-( --- I am here: http://maps.google.com/maps?ll=46.328961,-72.603320 Link to comment Share on other sites More sharing options...
tutima Posted October 28, 2011 Report Share Posted October 28, 2011 I had the Zigmeister installed my Taka crystal on the 3717 and he had no problem with it...Maybe yours is a Topgun crystal as others suggested... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now