The_Sazerac Posted September 18, 2011 Report Share Posted September 18, 2011 Hi everyone, New rep collector here, but have been "studying" these forums for over a month. I finally laid down some $ on my first rep purchase, and I will update this thread with QC pics and the shipped product as I receive them. Cheers! Link to comment Share on other sites More sharing options...
Jkay Posted September 18, 2011 Report Share Posted September 18, 2011 Awesome. Let us know how it goes. Link to comment Share on other sites More sharing options...
PPN Posted September 18, 2011 Report Share Posted September 18, 2011 Great, congrats! A great rep to start out with as it's close to the original. Who did you order from? Link to comment Share on other sites More sharing options...
maxman Posted September 18, 2011 Report Share Posted September 18, 2011 Well... you went and did it now. there's no turning back. Im sure you will enjoy the SMPO very much,solid first purchase. Mike Link to comment Share on other sites More sharing options...
The_Sazerac Posted September 23, 2011 Author Report Share Posted September 23, 2011 Hey guys, Just got the QC pics and video from ReplicaMake... looks good to me right? http://www.youtube.com/watch?v=IFGmhmHukU8&feature=player_embedded Link to comment Share on other sites More sharing options...
PPN Posted September 23, 2011 Report Share Posted September 23, 2011 Spacing between the Omega logo and the "Omega" word looks a little big. And the placement of the bezel pearl looks a little low on in the triangle (I'd ask for closer and clearer pics of this). Link to comment Share on other sites More sharing options...
The_Sazerac Posted September 23, 2011 Author Report Share Posted September 23, 2011 You're right... that pearl is definitely a tad low on the bezel, but I'm ok with the words and spacing on the face. So, I should likely request a different bezel perhaps? Link to comment Share on other sites More sharing options...
The_Sazerac Posted September 23, 2011 Author Report Share Posted September 23, 2011 Update: After reviewing previous QC pics from ReplicaMake, I have decided to confirm this order. Interestingly, the 45mm version had a lower pearl placement on the triangle on the bezel, whereas a majority of the 42mm QC pics displayed a more centered pearl placement. I'll update this when I receive the product! Link to comment Share on other sites More sharing options...
jonsydney Posted September 23, 2011 Report Share Posted September 23, 2011 Nice first rep. The pumpkin 45mm was one of my first and didn't leave my wrist for weeks. I then realized the sizing didn't quite match my 6.75" wrists and have since moved onto a black dial 42mm. Enjoy your purchase and post pics! Link to comment Share on other sites More sharing options...
cougar1 Posted September 23, 2011 Report Share Posted September 23, 2011 Yep low pearl is an issue with every 5th gen 45mm PO unfortunately, the 42mm are a little better with centering in that regard! At least from the qc pics the pearl looks neat and small, and everything else looks pretty good..... nice watch...you could do alot worse! Link to comment Share on other sites More sharing options...
ZedWings Posted September 24, 2011 Report Share Posted September 24, 2011 Looks nice to me! I'm a newbie too and I've yet to see a rep with accurate pearl I plan to add one of these to my collection (currently: 1 ). P.S Love the mario music on the vid. Link to comment Share on other sites More sharing options...
Jkay Posted September 24, 2011 Report Share Posted September 24, 2011 My only concern regarding this watch is that it's obviously an older generation of UPO. Where is the anti-counterfeit logo and the other latest-generation case back engravings. If this is indeed a UPO, it's certainly not a newer release. Possibly as old as a year or more. I hope it will not arrive with happy feet. Link to comment Share on other sites More sharing options...
The_Sazerac Posted September 24, 2011 Author Report Share Posted September 24, 2011 Jkay, Thanks for those observations. I would not have realized those older characteristics existed since I am rather new to this hobby. If the product arrives and appears different than the QC pics, that should allow me to return it for the product I ordered, correct? (I suppose it ultimately depends on the seller...) Anyway, considering that these sellers all receive their products from the same warehouse/ manufacturer, would this mean that there is an abundance of supply of these older "UPO" models? Thanks! Link to comment Share on other sites More sharing options...
tokic Posted September 24, 2011 Report Share Posted September 24, 2011 What?! This is Older UPO model?!So what you say is besides anti-counterfeit logo and the other latest-generation case back engravings it should have what?!Don't dig this cuz on all dealers web pages I think this one is newest and the best,...correct me if im wrong,....and please give me link to UPO with correct case back engravings!thx Link to comment Share on other sites More sharing options...
the_rymeister Posted September 24, 2011 Report Share Posted September 24, 2011 Hi mate what's the website and how much did you pay if you Don't mind me asking, quite new to watch collecting and looking for the best Place to purchase a po 45.5mm cheers Ryan Link to comment Share on other sites More sharing options...
Jkay Posted September 24, 2011 Report Share Posted September 24, 2011 My apologies for this error; after doing research, I see that only the latest generation 42mm PO has an ACL and additional engravings .. the latest generation 45mm does not yet have these things. UPO 45mm PO 42mm Latest generation: Link to comment Share on other sites More sharing options...
The_Sazerac Posted October 5, 2011 Author Report Share Posted October 5, 2011 Update: It appears my watch has been stuck in China because of a 6 day national holiday. My watch arrived for despatch in Ghangzhou on 9/29, but I suppose it was not shipped before the holiday started. Hopefully I'll get it very soon! Link to comment Share on other sites More sharing options...
maxman Posted October 5, 2011 Report Share Posted October 5, 2011 Good luck with your new PO. Although not perfect..It looks like a very good PO overall. Most of the PO rep pearls are a little to high or a little to low....I dont think I've seen the perfect one yet.....where the bottom of the pearl crest the silver inner ring of the bezel. These are very small flaws...I cant Imagine that they will be a issue. Mike Link to comment Share on other sites More sharing options...
ninjagaiden Posted October 6, 2011 Report Share Posted October 6, 2011 Be interested to hear how you get on with your watch. China will come on line on Saturday... I tend to get stuff from Josh and I want an orange bezel 45mm UPO. I am also goin to ask if he can get me a black bezel to go with it. My logic is that I *loev* the orange colour but it is possible that it will age better with a black bezel like yours. This way I get the best of both worlds if people decide that orange is out in a few years time. Link to comment Share on other sites More sharing options...
The_Sazerac Posted October 13, 2011 Author Report Share Posted October 13, 2011 Hey y'all, Finally received the watch yesterday. It looks and feels great, exactly like the QC pics displayed. I need to get the band resized, so I won't take any pics until then. OK, more to come soon! Link to comment Share on other sites More sharing options...
the_rymeister Posted October 13, 2011 Report Share Posted October 13, 2011 Congrats mate on your 1st purchase, coukd you post up a wrist shot when you post some pics cheers Buddy. Ry Link to comment Share on other sites More sharing options...
ninjagaiden Posted October 13, 2011 Report Share Posted October 13, 2011 My 45.5 Orange bezel UPO has just cleared customs and will be here soon. Will be interesting to compare the black and orange versions... Link to comment Share on other sites More sharing options...
The_Sazerac Posted October 17, 2011 Author Report Share Posted October 17, 2011 Hey guys, Here is a quick wrist shot... My wrists aren't too big, but the 45.5mm looks like the right size and not too big at all. Overall I am very satisfied with the quality of this watch, and I never want to take it off! If you have any other questions, just let me know. Glad I joined the UPO rep family! 1 Link to comment Share on other sites More sharing options...
maxman Posted October 17, 2011 Report Share Posted October 17, 2011 Congratulations..from what I can see... your PO looks great on your wrist. I do suggest that you take it off before showering. Mike Link to comment Share on other sites More sharing options...
the_rymeister Posted October 17, 2011 Report Share Posted October 17, 2011 It's a beauty mate! Mines just been posted, I went for the 42mm in the end I was worried the 45mm would be too big but yours looks great. Can't wait to get mine.cheers for pic bud Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now