laltromondo Posted May 15, 2012 Report Share Posted May 15, 2012 (edited) Hi, I am new here, and I was reading "By-Tor's" excellent Omega guide. In that guide he shows a picture of a Omega Speedmaster Black Moon Watch Seagull ST-19 hand wind, with a black leatherstrap. I have read each and every "Trusted Dealers" posts, but I have not found any Moon Watch with the "bulbe/curved" glass, only the flat. So my question now is,...from what dealer can I purchase the Moon Watch replica with the "bulbed" dialcover glass? Edited May 15, 2012 by laltromondo Link to comment Share on other sites More sharing options...
cougar1 Posted May 16, 2012 Report Share Posted May 16, 2012 I'm not sure they are available anymore, the only one recently with the domed crystal is the watcheden quartz version, it's not a bad rep for the price. Link to comment Share on other sites More sharing options...
krpster Posted May 16, 2012 Report Share Posted May 16, 2012 You may have to get the flat crystal and then replace with an after market domed plexi. I can't recall who did this but I do remember seeing it done. Link to comment Share on other sites More sharing options...
Lex2009 Posted May 16, 2012 Report Share Posted May 16, 2012 I think there is no moony with plexi ... Get the handwind, switch of the glass, look for the diameter (something 35,xx mm) and buy this plexi at cousinsuk.com ... will cost you somthing about € 3,00 + PP Link to comment Share on other sites More sharing options...
laltromondo Posted May 17, 2012 Author Report Share Posted May 17, 2012 Thanks guys for the good info. Will considder. Greetings from Sweden / Link to comment Share on other sites More sharing options...
Five of Clubs Posted May 19, 2012 Report Share Posted May 19, 2012 (edited) I swapped the crystal for a plexi on my ST19 manual wind Speedy rep after reading about FXRandy doing the same thing. As mentioned above, tthe plexi came from Cousins UK. Be careful which Speedy rep you order since there appears to be more than one version now. You will need to glue in a slightly undersized plexi because the bezel insert has a smaller diameter than the bezel itself. It looks pretty good though. Here are some pictures: Edited May 19, 2012 by Five of Clubs 1 Link to comment Share on other sites More sharing options...
laltromondo Posted May 21, 2012 Author Report Share Posted May 21, 2012 Looking very good. Do you care to share info about where you got the Speedy, and also if you remember the size of the plexi? Link to comment Share on other sites More sharing options...
Lex2009 Posted May 21, 2012 Report Share Posted May 21, 2012 Look, that you got the speedy with the recessed subdials ... will be not easy to find, I'd tried it too ... The diameter of the plexi is written on the package ... 340 ... means 34,0 mm Link to comment Share on other sites More sharing options...
Five of Clubs Posted May 23, 2012 Report Share Posted May 23, 2012 Sorry for the slow response! The plexi is indeed a 34.0mm, and the watch originally came from MR (but I don't think they are a trusted dealer on the forums any longer). A friend of mine recently had a difficult time finding this version of the Speedy, and in fact never did. I doubt that helps, but good luck. Link to comment Share on other sites More sharing options...
lhooq Posted May 23, 2012 Report Share Posted May 23, 2012 I'm not sure they are available anymore, the only one recently with the domed crystal is the watcheden quartz version, it's not a bad rep for the price. I used to recommend the quartz Speedy, too, until some genius decided to bollix up its dial. Now the 6 o'clock register reads "15/30/45/60" while the sub@3 has "8/16/24"! Link to comment Share on other sites More sharing options...
laltromondo Posted May 23, 2012 Author Report Share Posted May 23, 2012 Thanks. So, I will look around and see what I can find. Link to comment Share on other sites More sharing options...
renonspe Posted August 28, 2012 Report Share Posted August 28, 2012 Hey guys, I'm looking at the Lemania hand wind movements on silix's site. Is that the best speedmaster Rep with a hand wind movement available at the moment? I'd like to get a hand-wind movement if possible (and I can find one that is reliable). However let me know if I want a reliable movement if I need to just get a speed master rep with a 7750 Valjoux... Seems a bit sacreligious... And I'd definitely get a kick out of it. But I'm not planning on being in zero gravity anytime soon. Link to comment Share on other sites More sharing options...
KMAC Posted August 28, 2012 Report Share Posted August 28, 2012 I am also. Are all the good speedy's gone and blue moon used sales forum finds Link to comment Share on other sites More sharing options...
renonspe Posted August 29, 2012 Report Share Posted August 29, 2012 I think we might be on our own. I have wanted a moon watch for years. Now that I have found the world of replica watches, I'll buy one the day I find it. Feel free to ping me if you find something worthwhile. Right now it looks like I'm either getting a Lemania hand wind or an asian 7750 automatic. Link to comment Share on other sites More sharing options...
aeromatic Posted September 9, 2012 Report Share Posted September 9, 2012 Replaced the reduced rep flat saphire with a gen omega crystal of the correct size it made a big difference to the appearance the saphire just destorts the dial here are some quick photos! Link to comment Share on other sites More sharing options...
KMAC Posted September 9, 2012 Report Share Posted September 9, 2012 That looks good aero. Link to comment Share on other sites More sharing options...
aeromatic Posted September 9, 2012 Report Share Posted September 9, 2012 That looks good aero. Thanks KMAC! the glass is the only mod done i got rid of the none correct bracelet anyway most older speedys are on leather straps i would like to fit a solid backcase instead of the crystal clear backcase does anyone know if a gen vintage backcase fits on the reduced rep? Link to comment Share on other sites More sharing options...
Tracyl Posted September 13, 2012 Report Share Posted September 13, 2012 I don't have a picture, but I bought one from Silix with the flat crystal, and swapped with an OEM Omega Domed Hesalite crystal. It would not fit out of the box. I had to sand the bottom and the sides of the crystal to get it to fit. Then had to glue it in. I also painted the area near the rehaut a flat black with acrylic paint. It looks great now. I also have a bunch of the crystals ranging from 34-36mm from cousins that I didn't use. I'll probably sell these some day. So to answer your question, it can be done, but before trying this, make sure you know of a good local watch smith that can help if you get stuck. T. Link to comment Share on other sites More sharing options...
woof* Posted October 1, 2012 Report Share Posted October 1, 2012 Aero's looks great! I bought mine a few years ago already modded, but sadly they did a poor job. They got glue fumes (superglue?) on the inside of one edge of the crystal and it's permanently fogged. When I bought it, it looked like the fogging was on the outside and would sand/buff off. They ended up not being the case. Yet another project I need to do but haven't gotten around to.....but will someday You can see it on the bottom left. Link to comment Share on other sites More sharing options...
aeromatic Posted October 2, 2012 Report Share Posted October 2, 2012 Aero's looks great! I bought mine a few years ago already modded, but sadly they did a poor job. They got glue fumes (superglue?) on the inside of one edge of the crystal and it's permanently fogged. When I bought it, it looked like the fogging was on the outside and would sand/buff off. They ended up not being the case. Yet another project I need to do but haven't gotten around to.....but will someday You can see it on the bottom left. woof thats great looking watch and i love the mesh bracelet i had one of those on my plo-prof yours looks like you have dished subdials? my do not iv ordered one of those nasa cloth straps and im thinking if the watch proved a good movement i will fit a gen nasa backcase if it fits and a gen bracelet but i have to decide if the watch is worth the 300usd costs to do this! Link to comment Share on other sites More sharing options...
woof* Posted October 2, 2012 Report Share Posted October 2, 2012 Thanks Mine keeps great time with the manual lemania copy, no problems in over two years. Yes I believe my subdials are a little dished. I only had it on the mesh a short time. Right now it's on a gen Seamaster bracelet. It just needs the crystal replaced and maybe a solid caseback like what your doing. Link to comment Share on other sites More sharing options...
aeromatic Posted October 2, 2012 Report Share Posted October 2, 2012 Thanks Mine keeps great time with the manual lemania copy, no problems in over two years. Yes I believe my subdials are a little dished. I only had it on the mesh a short time. Right now it's on a gen Seamaster bracelet. It just needs the crystal replaced and maybe a solid caseback like what your doing. That australian ebay seller has a lot of omega as im sure you know he has gen speedy bracelets wonder why there are no rep correct bracelets available Link to comment Share on other sites More sharing options...
woof* Posted October 2, 2012 Report Share Posted October 2, 2012 I had an extra gen 1171 that I put on my speedy. I like that bracelet a lot. Yes I'm familar with watchco/ watchadoo guys. They have lots if great stuff Link to comment Share on other sites More sharing options...
aeromatic Posted October 2, 2012 Report Share Posted October 2, 2012 I had an extra gen 1171 that I put on my speedy. I like that bracelet a lot. Yes I'm familar with watchco/ watchadoo guys. They have lots if great stuff if i could find a movement i can buy a gen new oldstock case,dial,bracelet from these guys i think that ofri had one now that would make a great build apart from the movement you would have a brand new vintage speedy Link to comment Share on other sites More sharing options...
woof* Posted October 2, 2012 Report Share Posted October 2, 2012 I think eBay seller "swisstickers" has some movements Eta: just checked him, he's only got the speedy auto movement listed. You might email him, he's pretty resourceful. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now