janeto72 Posted May 16, 2012 Report Share Posted May 16, 2012 Hi everyone, i am in the process of finishing a build of a tudor monte carlo....i have a set of DW hands for the sub dials and they don't fit properly......12 hour hand just sits loose and spins......and 45 min hand a little tighter but is still loose....any sugesstions? Can't get the DW hands anymore.....can i try some different hands or what can i do to use these ones....As well, is the stem on the 45 minute sub dial thicker than the 12 hour stem? thanks in advance.... Link to comment Share on other sites More sharing options...
superlative Posted May 16, 2012 Report Share Posted May 16, 2012 The Yuki hands are the better ones that are closer to the gens. Link to comment Share on other sites More sharing options...
lhooq Posted May 16, 2012 Report Share Posted May 16, 2012 The Yuki hands are the better ones that are closer to the gens. They're built better, and they have the unpainted centers (which can be a crap-shoot on the DWs: winners get steel, losers get brass), but the Yuki subdial hands are much skinnier than the gens. Link to comment Share on other sites More sharing options...
modelizer Posted May 16, 2012 Report Share Posted May 16, 2012 They're built better, and they have the unpainted centers (which can be a crap-shoot on the DWs: winners get steel, losers get brass), but the Yuki subdial hands are much skinnier than the gens. +1 This DW 7032 subdial hands loser x2 can confirm that this statement is very true.. @janeto: My first DW subdial set had to be pinched to fit properly on the 7734 - my watchmaker measured them and found out they were 7750 sized.. Link to comment Share on other sites More sharing options...
denimhead Posted May 16, 2012 Report Share Posted May 16, 2012 Morning M, how about the CWP hand set? I went for the longer and correctly coloured seconds hand after your review on all of the hand sets available. I know they're painted white but would it be possible to remove the paint at the stem end? Cheers M Link to comment Share on other sites More sharing options...
lhooq Posted May 16, 2012 Report Share Posted May 16, 2012 Morning M, how about the CWP hand set? I'm not sure. When I ordered the set from CWP, it only included 3 hands as they didn't have any subdial hands in stock. (Similarly, I've been wanting to order another orange sweep by itself, but Michael says it's all or nothing.) Link to comment Share on other sites More sharing options...
denimhead Posted May 16, 2012 Report Share Posted May 16, 2012 Yes I think i was lucky, he agreed to sell me the Seconds hand separately but he wasn't happy about it. How about Phong? I know the orange hand is all wrong but the rest might be ok? Link to comment Share on other sites More sharing options...
denimhead Posted May 16, 2012 Report Share Posted May 16, 2012 Any good M ? Or too thin Link to comment Share on other sites More sharing options...
modelizer Posted May 16, 2012 Report Share Posted May 16, 2012 Any good M ? Or too thin The subdial hands in the first set does not have the correct shape and the ones in the second set is too thin alá Yuki. However, this full set looks very promising: Link to comment Share on other sites More sharing options...
lhooq Posted May 16, 2012 Report Share Posted May 16, 2012 Subdial hands on the left look too fat. The ones on the right look too thin. Sorry, Goldilocks. The subdial hands of Phong look good to me, though. modelizer: That handset would look better if the hour and minute didn't have that those pinched "handles" on their tails. My old CWP hands had the same shape, but they didn't have the edge running down the centers. Link to comment Share on other sites More sharing options...
Ephry73 Posted May 16, 2012 Report Share Posted May 16, 2012 That set looks really good Modelizer. Where from? Link to comment Share on other sites More sharing options...
modelizer Posted May 16, 2012 Report Share Posted May 16, 2012 modelizer: That handset would look better if the hour and minute didn't have that those pinched "handles" on their tails. My old CWP hands had the same shape, but they didn't have the edge running down the centers. You are absolutely right about the "handles" M. Was at the office when I posted it and my 7032 has not been worn in a while, so the accurate Yuki/ gen hour and minute hand shape was not fresh in my mind. But the other hands looks good me thinks! That set looks really good Modelizer. Where from? They are from a HK based seller on chrono24. Hour and minute hand could use a little modding to get rid of the "handles" though.. Link to comment Share on other sites More sharing options...
Donerix 2.0 Posted May 16, 2012 Report Share Posted May 16, 2012 Here another looser with brass hands, I have a set of Yuki hands, but the lume color is way off, so I decided to stay with the looser hands Link to comment Share on other sites More sharing options...
lhooq Posted May 16, 2012 Report Share Posted May 16, 2012 How nice would an all-brass 7031 look, I wonder? Link to comment Share on other sites More sharing options...
Ephry73 Posted May 16, 2012 Report Share Posted May 16, 2012 For now my DW case set is using the DW modified hands. I cut down the minute hand and baked the hell out of the entire set with dial. I have Eric's black dial. @Modelizer I would take that hand set as is. The handles don't bother me too much but seems easily fixed. How much ? Link to comment Share on other sites More sharing options...
modelizer Posted May 16, 2012 Report Share Posted May 16, 2012 Here another looser with brass hands, I have a set of Yuki hands, but the lume color is way off, so I decided to stay with the looser hands Wow - That's a new one for me! Never seen the brass version of the DW hour and minute hands before! For me it has "only" been the subdial hands when removing the paint in the centre. Let me know if you need a DW hour and minute hand in steel (or what looks like it) mate - should have a new and unused pair in one of my parts boxes somewhere.. I would take that hand set as is. The handles don't bother me too much but seems easily fixed. How much ? He's asking $88 shipped. Let me know if you are thinking about placing an order. I would not mind swapping my brassy subdial hands, so maybe we can work out a better price if ordering two sets? Link to comment Share on other sites More sharing options...
Ephry73 Posted May 16, 2012 Report Share Posted May 16, 2012 Yuki charges 65 for his sets. I am sure we can come up with a better deal combined. I'm game. Now, the issue with the minute hand length can always be worked out, but hopefully these are just the right length. EDid someone say Brass/gold Monte Carlo? Talk about a true 70s coke watch! Link to comment Share on other sites More sharing options...
modelizer Posted May 16, 2012 Report Share Posted May 16, 2012 (edited) Yuki charges 65 for his sets. I am sure we can come up with a better deal combined. I'm game. Now, the issue with the minute hand length can always be worked out, but hopefully these are just the right length. Alrighty then.. PM time! [Edit: Your inbox seems to be full mate] Edited May 16, 2012 by modelizer Link to comment Share on other sites More sharing options...
redwatch Posted May 16, 2012 Report Share Posted May 16, 2012 I'm in for an order as well. The brass subdial hands drive me crazy and I'd like to update my chrono seconds hand as well. Those subdial hands look great Link to comment Share on other sites More sharing options...
Ephry73 Posted May 16, 2012 Report Share Posted May 16, 2012 Weird. Link to comment Share on other sites More sharing options...
Ephry73 Posted May 16, 2012 Report Share Posted May 16, 2012 Check now? Link to comment Share on other sites More sharing options...
modelizer Posted May 16, 2012 Report Share Posted May 16, 2012 (edited) I'm in for an order as well. The brass subdial hands drive me crazy and I'd like to update my chrono seconds hand as well. Those subdial hands look great Sounds like we have a no brass group buy going on! Awesome - will include you in the PM mate! Check now? I'll check again.. [Edit: Still no luck buddy] Edited May 17, 2012 by modelizer Link to comment Share on other sites More sharing options...
janeto72 Posted May 17, 2012 Author Report Share Posted May 17, 2012 +1 This DW 7032 subdial hands loser x2 can confirm that this statement is very true.. @janeto: My first DW subdial set had to be pinched to fit properly on the 7734 - my watchmaker measured them and found out they were 7750 sized.. Ya i tried pinching them too and it really didn't help.... Link to comment Share on other sites More sharing options...
modelizer Posted May 17, 2012 Report Share Posted May 17, 2012 Ya i tried pinching them too and it really didn't help.... Ouch! Sorry to hear that mate.. But the DW subdial hands is really a hit or miss unfortunately.. Hence the reason for this thread to unfold into a small "group buy".. You want in? (Sorry for the hijack BTW) Link to comment Share on other sites More sharing options...
janeto72 Posted May 17, 2012 Author Report Share Posted May 17, 2012 Yes...i am in for sure! One set for me too! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now