mickeypro Posted July 7, 2012 Report Share Posted July 7, 2012 I purchased a Clarks 127 and it took some shaving to get it on. Since most of the gen parts wont fit reps does anyone have an idea of an easier to install crystal than a tropic 127 for a 1680? thanks in advance 1 Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted July 7, 2012 Report Share Posted July 7, 2012 where is the 1680 from what maker and what part did you have to shave on the crystal Quote Link to comment Share on other sites More sharing options...
mickeypro Posted July 7, 2012 Author Report Share Posted July 7, 2012 I bought it on the forum so I dont know for sure the dealer. I had to shave the insides of the clarks crystal and apply pressure for it to pop on. I'm wondering if I need a diff size crystal. I was given info that on my 1016 I need the T19 rather than the T22 the gen takes so I thought the 1680 might be the same way. Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted July 7, 2012 Report Share Posted July 7, 2012 All the 1680s i know that have Gen style bezel (MBW and Cartel short CG versions) constructions take a clarks crystal with out issues, Quote Link to comment Share on other sites More sharing options...
alligoat Posted July 9, 2012 Report Share Posted July 9, 2012 Along Andy's line, you can rule out the MBW and the short cg cartel sub. So that means you have a cartel sub of some other origin and fitting a gen or decent aftermarket crystal is hit or miss. I don't know of any other crystal that fits. You could try the various T-19s that Ofrei use to carry, one of those might fit, but then you'd be w/o a cyclops. Buying a set of calipers from Harbor Freight would be another good idea and start measuring. Then you at least know what you have. At that point you can check ODs and IDs and compare. Quote Link to comment Share on other sites More sharing options...
jmb Posted July 9, 2012 Report Share Posted July 9, 2012 If it's a PT model then the inside of the crystal skirt will need to be shaved or the OD of the rehaut reduced. Quote Link to comment Share on other sites More sharing options...
alligoat Posted July 10, 2012 Report Share Posted July 10, 2012 If it's a PT model then the inside of the crystal skirt will need to be shaved or the OD of the rehaut reduced. Wouldn't you need a new crystal retention ring also J? Quote Link to comment Share on other sites More sharing options...
woof* Posted July 10, 2012 Report Share Posted July 10, 2012 Also, if it's a PT sub..won't it have the plastic gasket thing? Quote Link to comment Share on other sites More sharing options...
mickeypro Posted July 11, 2012 Author Report Share Posted July 11, 2012 I ended up putting a t-19 on it since it wouldn't for my 1016. Now if I could figure out what fits Narikas 1016. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.