Guest gregc1992 Posted December 5, 2012 Report Posted December 5, 2012 The bolts on the bezel just don't seem quite right. Is this an easy fix? I have the option of waiting for a new batch, I don't know if I should take this or wait. I will attach photos to show you what I mean. Thanks!
sts1131 Posted December 5, 2012 Report Posted December 5, 2012 Will the maker be producing a new batch if the current batch isn't totally absorbed by the dealers?
edgematic1 Posted December 5, 2012 Report Posted December 5, 2012 reject, look at those screws, also the lume on the bezel insert ain't perfect. Main concern are the screws, although you can align them by yourself as well.
sgtguk Posted December 5, 2012 Report Posted December 5, 2012 I'm no expert on these divers but they don't look good quality like the last batch everyone raved about I'd get a refund and wait for the new batch when it comes!
astonjenks Posted December 5, 2012 Report Posted December 5, 2012 The screws in the flesh are tiny, however, these do look too small for the cut out or the cut out too large hence they have turned, if patience allows you to wait, I would wait. Regards Astonjenks
sts1131 Posted December 5, 2012 Report Posted December 5, 2012 Then again seems like the screws could be done by a simple DIY, Looks like the blue cyclops is fixed!
txcollector Posted December 5, 2012 Report Posted December 5, 2012 Then again seems like the screws could be done by a simple DIY, Looks like the blue cyclops is fixed! That's what I was going to say. Kudos for the cyclops fix.
HartDoc Posted December 5, 2012 Report Posted December 5, 2012 Is there a mark on the bezel at 40 or is that lint.
Guest gregc1992 Posted December 5, 2012 Report Posted December 5, 2012 Thank you for all your responses! I asked Puretime if they can fix the screws and it looks like they did. This looks fine to me, but I'd appreciate your opinions as well. Check it out: Is there a mark on the bezel at 40 or is that lint. It was lint.
Guest gregc1992 Posted December 5, 2012 Report Posted December 5, 2012 Will the maker be producing a new batch if the current batch isn't totally absorbed by the dealers? They've sold out already.
Guest gregc1992 Posted December 5, 2012 Report Posted December 5, 2012 I am rejecting because of this: (bolt @ 2 and 1) Hopefully I can get a refund and not have to wait for however long it takes for them to re stock.
sts1131 Posted December 6, 2012 Report Posted December 6, 2012 Looks good here, BTW did they manage to fix the blue cyclops problem the date looks great without the blue tinge? Is this coming from Noob Factory?
Guest gregc1992 Posted December 6, 2012 Report Posted December 6, 2012 (edited) I'm not sure how bad the blue tint on the cyclops was before but it does seem to be gone, or at least reduced on all the watches I've been shown from Puretime QC. And yes they are from the Noob factory [hopefully]. Edited December 6, 2012 by gregc1992
Suncoast Posted December 9, 2012 Report Posted December 9, 2012 Wow.... I would have accepted it!! I don't know if you can get much better than that.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now