24-600 vs 24-603

[danielv2000]

Last week, I enquired about an adequate crown for a 6239/41. Seems the 24-600 was the correct crown. Would a 24-603 fit? Anyone know the difference?

Thanks

[Nanuq]

Take a look here:

http://www.rwgforum.net/topic/137889-crown-info/

[danielv2000]

Nanuq, thanks! I actually found that thread but realized that Akira's question, which is the same as mine, remained unanswered. "Hey mates, The 6239 Daytona had a #24-6000 tube with a #24-600 crown If I want to install a #24-603 crown, I need a #24-533-0 tube correct? 600 and 603 should be almost identical by the looks? 24-533-0 tube can be installed into the 6239 case? Any help appreciated Cheers Akira" Is this correct?

[automatico]

"If I want to install a #24-603 crown, I need a #24-533-0 tube correct? 600 and 603 should be almost identical by the looks? 24-533-0 tube can be installed into the 6239 case?"

.

When a case calls for a 600 crown it uses a 6.0mm type case tube and the case is threaded 3.0mm x .35mm.

When a case calls for a 603 crown it uses a 5.3mm type case tube and the case is threaded 2.5mm x .25mm. 

[Ado213]

I know it's an old post but, impressively correct. Had me fooled for a long time !!