help movement Yuki 3135

[chevall]

I am looking for help on 3135 yuki, and really equal genuine rolex 3135? what are the differences?

 

tanks

 

chevall

 

 

 

[Rolexman]

All you need to know here:

http://www.rwgforum.net/topic/155014-movement-tear-down-angus-3135-v2-rolex-clone/?hl=+3135

[highoeyazmuhudee]

on the positive, they take gen date discs

[Ephry73]

All yokes aside. I have had three y3135s serviced which are all working without issues. All well within COSC specs. Gen disc will fit with slight mods. All other parts fit very well.

E

[automatico]

A Wise Man once said:

 

Go Eta or Go Broke.  

 

He also said:

No Date = No Trouble.   

 

A guy just bought the best hearing aid in the world...

He came out of the audiologist's office and was walking down the street when he met a friend.

He said:  "Hey, I just got the best hearing aid in the world, it cost me $6000!"

The friend said:  "What kind is it?"

The hearing aid guy said:  "What did you say?"

The friend said:  "WHAT KIND IS IT?"

The hearing aid guy looked at his watch and said:  "It's about 3:15."    

[dropbear2008]

I think you are missing the point here. The benefit of the yuki 3135 is that gen parts can be used. The ETA clone 3135 has been around for a while, but if you have to clip dial feet and use aftermarket hands why bother ?

[automatico]

"I think you are missing the point here. The benefit of the yuki 3135 is that gen parts can be used. The ETA clone 3135 has been around for a while, but if you have to clip dial feet and use aftermarket hands why bother?"

 

The problem is always parts. No parts = a doa movement sooner or later.

Yuki etc 3135 clone parts are n/a. Very few genuine parts will work other than date wheels/dials.

Etaclone parts are n/a and not all genuine Eta parts will work on an Etaclone.

Genuine Eta parts are plentiful and affordable.

[dropbear2008]

"I think you are missing the point here. The benefit of the yuki 3135 is that gen parts can be used. The ETA clone 3135 has been around for a while, but if you have to clip dial feet and use aftermarket hands why bother?"

 

The problem is always parts. No parts = a doa movement sooner or later.

Yuki etc 3135 clone parts are n/a. Very few genuine parts will work other than date wheels/dials.

Etaclone parts are n/a and not all genuine Eta parts will work on an Etaclone.

Genuine Eta parts are plentiful and affordable.

 

Sorry, my comment was towards the now defunct "horologicalconsultant" and his musings (have also been removed). 

[quaresma7]

All yokes aside. I have had three y3135s serviced which are all working without issues. All well within COSC specs. Gen disc will fit with slight mods. All other parts fit very well.

E

Can you tell me if fits gen hands in yuki 3135?!

[Ephry73]

Yes, gen hands, disc(slight mods), rotor fits with no issue. Gen dial as well and no need to clip the feet. Gen set screws fit with no problems either. 

 

E

[firansky]

check this

 

http://www.rwgforum.net/topic/160076-rolex-3135-gen-vs-sa3135/

[Rolexman]

 

The problem is always parts. No parts = a doa movement sooner or later.

Yuki etc 3135 clone parts are n/a. Very few genuine parts will work other than date wheels/dials.

 

Yuki takes a lot of gen parts.

 

Besides... movements with no spare parts become spare parts

[Raytung]

How much normally for the yuki movement

[omgiv]

What are you guys having to do to the genuine date disc in order for it to work?  I am working on my basket case yuki 3135 right now, but the date wheel seemed to fit and work without any mods.  Thanks!!!

[quaresma7]

YEs gen hands fit with no problem. 

 

 

Yes, gen hands, disc(slight mods), rotor fits with no issue. Gen dial as well and no need to clip the feet. Gen set screws fit with no problems either. 

 

E

 

Thanks so much guys!