spineguy Posted November 19, 2013 Report Share Posted November 19, 2013 Who is marini? Link to comment Share on other sites More sharing options...
Dizzy Posted December 2, 2013 Report Share Posted December 2, 2013 I'm not really into these new shiny sapphire crystal ceramic Rolex's, but I went and ordered a BP from Sead the other day. We'll see how it looks when it arrives. I've been holding off for one with proper AR on the cyclops. I'll swap on a Noob factory clasp if I have to but I'm sure the BP will be fine after a few adjustments and some massaging. I shall report back with my findings. Link to comment Share on other sites More sharing options...
Dizzy Posted December 12, 2013 Report Share Posted December 12, 2013 Well I received my BP sub today via Sead. Overall impression is pretty good. Not bad for $155 watch. Dial is nice and date wheel is very centered. The "AR cyclops" is pretty lame though. It's got a bit of a blue tint to it but definitely no black hole effect like the gen. It doesn't really do much of anything at all. I was expecting a lot more and I would have gladly paid extra to have it correct. It's a huge feature on these new ceramic Rolexs that they are failing to replicate. Don't let anyone tell you it's the correct AR because it's not even close to the genuine crystal. The case and bezel are nice and the crown is ok. The bracket is pretty good and my only complaint about the clasp is that the glued/soldered on rolex cornet is WAY off center on the flip lock. That seems to be a weak point in a lot of rolex reps. Not sure why they have so much trouble centering the crown on the clasp. Mine is way off and I'll probably have to replace the clasp because it's too far off center to live with. I'll see if I can find a noob clasp somewhere. I've seen some guys puttin gen crystals into these watches. Does anyone know if a gen crystal will fit into the BP factory rep? Link to comment Share on other sites More sharing options...
live1 Posted December 12, 2013 Report Share Posted December 12, 2013 gen fits real nice but u need to use rep gasket Link to comment Share on other sites More sharing options...
Dizzy Posted December 13, 2013 Report Share Posted December 13, 2013 Ok cool I'm going to look into that or getting this crystal properly AR'd. Link to comment Share on other sites More sharing options...
live1 Posted December 13, 2013 Report Share Posted December 13, 2013 the stock bp crystal sucks adding new ar won't help.you need a gen ar crystal Link to comment Share on other sites More sharing options...
Dizzy Posted December 14, 2013 Report Share Posted December 14, 2013 I can pull the cyclops off and AR the crystal properly as rolex does at the factory. The crystal itself needs to be done top and bottom under the cyclops as well as the he bottom of the cyclops itself. That's how you get that black hole effect. Link to comment Share on other sites More sharing options...
live1 Posted December 14, 2013 Report Share Posted December 14, 2013 the crystal sucks it dont matter if you re ar it.lec too big and crystal not clear like gengen crystal is the only way to go. Link to comment Share on other sites More sharing options...
helldiver Posted April 9, 2014 Report Share Posted April 9, 2014 Approximately how much should we pay for a gen crystal? Link to comment Share on other sites More sharing options...
live1 Posted April 9, 2014 Report Share Posted April 9, 2014 i paid 145 pounds for mine Link to comment Share on other sites More sharing options...
helldiver Posted April 9, 2014 Report Share Posted April 9, 2014 i paid 145 pounds for mine thanks live1 for the info. How did you know it is genuine? (when it is sold by a total stranger i mean) Link to comment Share on other sites More sharing options...
live1 Posted April 9, 2014 Report Share Posted April 9, 2014 because i know what a gen crystal looks like.i can help u get a gen crystal from my friend in london.i get the cheapest gen crystal on the internet i think,well that's what im told anyway.pm me if u like.i don't want millions of pms from every one because ive already had too many people asking. Link to comment Share on other sites More sharing options...
live1 Posted April 9, 2014 Report Share Posted April 9, 2014 from a total stranger i would not buy unless they are a known person on all the rep forums,or trf etc,never buy from randoms they sell fake crap Link to comment Share on other sites More sharing options...
fabioliveri Posted April 22, 2014 Report Share Posted April 22, 2014 which is the reference of the gen crystal?? Link to comment Share on other sites More sharing options...
Jon42 Posted October 24, 2014 Report Share Posted October 24, 2014 Hi guys, I'm new to this forum. So can't post a new topic. The topic is related to this one, so I hope you can help. A lot of updates and revisions from the manufacturers noob factory and BP factory since the last post here. I want to pull the trigger on TS Deepsea blue dial http://www.tswatchltd.com/15787-ro15787-rolex-116660-deep-sea-blue-ss-super-lumed-1-1.html But Christina told me they only have the BP version, not the noob. Can any kind soul advise which version is closer to the gen? I have no intention to mod. I just need closest first impression when people see my atch, as I won't pawn it, neither will I let someone scrutinize the watch in detail. So, the closest look on surface is good enough. I know the issues with cyclops, so Deepsea is a good solution, since I prefer to have date. A no date sub isn't that convenient, I'm looking forward for your feedback. Thanks! Link to comment Share on other sites More sharing options...
Rolexman Posted October 24, 2014 Report Share Posted October 24, 2014 Hi guys, I'm new to this forum. So can't post a new topic. The topic is related to this one, so I hope you can help. A lot of updates and revisions from the manufacturers noob factory and BP factory since the last post here. I want to pull the trigger on TS Deepsea blue dial http://www.tswatchltd.com/15787-ro15787-rolex-116660-deep-sea-blue-ss-super-lumed-1-1.html But Christina told me they only have the BP version, not the noob. Can any kind soul advise which version is closer to the gen? I have no intention to mod. I just need closest first impression when people see my atch, as I won't pawn it, neither will I let someone scrutinize the watch in detail. So, the closest look on surface is good enough. I know the issues with cyclops, so Deepsea is a good solution, since I prefer to have date. A no date sub isn't that convenient, I'm looking forward for your feedback. Thanks! Only BP makes these at the moment and they are damn good. No worries. There are some reviews around. Use the search to find them. Mark. Link to comment Share on other sites More sharing options...
508-Fanatic Posted October 24, 2014 Report Share Posted October 24, 2014 Also, if you want all that you can get a BK Sub....or TC... they are pretty much 1:1 as someone who has a gen LV hulk to compare against. Your question is the best sub right? This question is epic for new members and also a little bit ignorant. If you want what you described then better go gen. But if you can luve with an amazing rep with flaws ownly 1% or less would see when they hold their watch in the hand then read on and inform yourself more. Rightnow the bp 116610 and the noob v2 are excellent. The noob v2 has an amazing pearl, super bracelet and better finish overall. Bp sub has deeper and more gen feeling and indices on dial are better. Both are amazing reps but you have to decide which one you want to choose! Link to comment Share on other sites More sharing options...
Jon42 Posted October 24, 2014 Report Share Posted October 24, 2014 Only BP makes these at the moment and they are damn good. No worries. There are some reviews around. Use the search to find them. Mark. Thank you Mark, I'll look for them. Link to comment Share on other sites More sharing options...
Jon42 Posted October 24, 2014 Report Share Posted October 24, 2014 Also, if you want all that you can get a BK Sub....or TC... they are pretty much 1:1 as someone who has a gen LV hulk to compare against. Hi 508-fanatic, I saw BK and TC in this forum but don't know where to find them. Can you recommend some TDs? Thank you Link to comment Share on other sites More sharing options...
Jon42 Posted October 27, 2014 Report Share Posted October 27, 2014 Hi 508-fanatic, I saw BK and TC in this forum but don't know where to find them. Can you recommend some TDs? Thank you I googled BK and TC submariner & found them. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now