dante Posted December 7, 2013 Report Share Posted December 7, 2013 I was wandering if anyone had experience the stopping or slowdown of the movement because of cold weather, it is happening to me know, after I leave the watch on my table at night the temperature get down to about 39, and the movement slowdown or stop, then I put it back on my wrist and it will work fine until I live it out again. Any help or solution? Thanks 1 Link to comment Share on other sites More sharing options...
mosyzlak Posted December 8, 2013 Report Share Posted December 8, 2013 It is possible that the lubrication is either too thin or too thick, so when the viscosity changes at lower temperatures, the friction goes up too much. If all other functions are normal at standard temps, a lubrication service by your local watchsmith will likely fix things. It should be done professionally, if you elect to do it yourself read up as much as possible in the forums + online resources on 6497/6498's, and proceed carefully.Best--- Link to comment Share on other sites More sharing options...
Nanuq Posted December 8, 2013 Report Share Posted December 8, 2013 When I'm camping in the cold I keep it on my wrist or in a sock at the foot of my sleeping bag. Maybe you can put it under your pillow? 1 Link to comment Share on other sites More sharing options...
mosyzlak Posted December 8, 2013 Report Share Posted December 8, 2013 Nanuq made a good point, keeping the watch warm is an alternative to servicing it. Link to comment Share on other sites More sharing options...
Nanuq Posted December 8, 2013 Report Share Posted December 8, 2013 That works fine, tested down to -35f Link to comment Share on other sites More sharing options...
chris5264 Posted December 8, 2013 Report Share Posted December 8, 2013 I wonder if the cold is contracting the case....and putting some pressure on the dial? perhaps the hour wheel is being pushed down and this is slowing it? I know a few movements I've put in such that there was even a little pressure here or there...would stop it... Link to comment Share on other sites More sharing options...
krpster Posted December 8, 2013 Report Share Posted December 8, 2013 Have you tried putting it in the same position overnight where it is not so cold? Perhaps not the cold but maybe the static position it is in overnight. That is a much more common problem related to servicing vs. Reaction to the cold. Link to comment Share on other sites More sharing options...
PeteM Posted December 8, 2013 Report Share Posted December 8, 2013 or in a sock at the foot of my sleeping bag Another good point is 'never buy a watch off Nanuq ' 1 Link to comment Share on other sites More sharing options...
hiker01 Posted December 8, 2013 Report Share Posted December 8, 2013 I don't know about the cold affecting the watch (believe me it was freakin cold at night after 14K).....I wore my Corum up to Mt. Everest BC with no problems...... and then went Oggling in Phuket with it: I mean diving: ....and it starts like a charm everytime I put it on! 1 Link to comment Share on other sites More sharing options...
PeteM Posted December 8, 2013 Report Share Posted December 8, 2013 Lovely pics... Now thats what I call a wristie !! Link to comment Share on other sites More sharing options...
Nanuq Posted December 8, 2013 Report Share Posted December 8, 2013 Another good point is 'never buy a watch off Nanuq ' For Sale - Lightly used Snowflake, low miles, only stepped on once." Link to comment Share on other sites More sharing options...
asciwhite Posted December 8, 2013 Report Share Posted December 8, 2013 When I'm camping in the cold I keep it on my wrist or in a sock at the foot of my sleeping bag. Maybe you can put it under your pillow? +1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now