Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Official Replica Guitar Thread


Recommended Posts

Good day to you guys!

 

Not sure if there is any of a following for this on the forum, or how many of you play guitar.

However, I have decided to set up a thread for this, as I don't only collect Replica Watches, but I have a small collection of Replica Guitars as well.

 

My reasonings for the two are completely different. I, as a guitar player, think that brands such as Gibson are charging a RIDICULOUS premium for their product, considering the lack of difference between an Epiphone and its Gibson counterpart. Yes the wood is better, but I'm a strong believer in the fact it makes very little difference on an electric, and yes the electronics are better, but you could replace all the parts on an epiphone to better than Gibson standard for less than a Gibson Les Paul costs....

 

Anyway, I basically buy rep guitars, and just pimp them out to my specs for a fraction of the cost of the real thing. I happily admit they're reps/fakes to friends, because I genuinely believe the genuine article is a rip off, which isn't the case with gen watches. I think a lot more time and care goes into a £3,000 watch, than does into a £3,000 guitar to be honest.

 

Anyway, I'll post up some pictures of my rep guitars when I'm back from my haircut!

Link to comment
Share on other sites

Nice ESP Iceman copy. I like ESP because they used jumbo frets.

As a professional musician I cannot see using rep guitars for two reasons; durability, and playability. The inferior parts cannot hold up to the intense pressures that I place on my guitars. It's hard enough to find a playable perfect gen with the best hardware let alone a rep.

Guitars are more of a precision instrument than a watch because they have to hold precise tuning frequencies, without losing them even under outrageous pressure.

I play scalloped guitars so I had to make my own since there were non commercially available. I bought the very first Fender Yngwei scalloped model when it came out, circa 1988, though the one I hand carved myself is way better.

Here are some photos

dapyquhe.jpg

syvy7y6y.jpg

yqujazu9.jpg

eja6a4am.jpg

My former teacher Paul Gilbert signed it, and so did Joe Satriani.

Here's the Yngwei

y9aquga5.jpg

  • Like 1
Link to comment
Share on other sites

Some of my copies actually exceed anything even remotely close to it in price. All of them stay in tune perfectly.

 

The main issue is the pickups tend to not be waxpotted, so as soon as you crank the gain, they just squeal. However, that's easily fixed with a change of pups and wiring etc.

Link to comment
Share on other sites

I play guitar and have a gen Fender and a rep (Squier) and, although I am not a professional, I can not really tell any difference in sound. This is especially true when I play electric as the amp setup makes the whole difference as opposed to an unamplified classic guitar with nylon strings - there you can feel the difference in sound as the wood and build makes the difference.

True , for the electric guitars playabilty and the details are indeed better with the gen, but the Squier is not that much worse. As said, I am not a pro that can tell all the subtleties apart, but as an amateur a good replica does its job marvellously.

barore

Link to comment
Share on other sites

There's no doubt a professional

nusician will notice the difference over a recreational player. They're far more in tune with the subtle nuances of the instrument and sounds it creates. Put a rep golf club in Tigers hands and he'll tell you it's a rep with his eyes closed but a weekend golfer likely won't know the diff.

I'm left handed so rep guitar selection is limited. I collect mainly less popular names like Burns, Minarik, DiPinto. I found a great site for reps and will be placing an order down the road. Found them accidentally when they had a couple guitars for sale on ebay.

http://maxetone.com/JGallery/index.php?view=category&catid=67&option=com_joomgallery&Itemid=2

Link to comment
Share on other sites

There's no doubt a professional

nusician will notice the difference over a recreational player. They're far more in tune with the subtle nuances of the instrument and sounds it creates. Put a rep golf club in Tigers hands and he'll tell you it's a rep with his eyes closed but a weekend golfer likely won't know the diff.

I'm left handed so rep guitar selection is limited. I collect mainly less popular names like Burns, Minarik, DiPinto. I found a great site for reps and will be placing an order down the road. Found them accidentally when they had a couple guitars for sale on ebay.

http://maxetone.com/JGallery/index.php?view=category&catid=67&option=com_joomgallery&Itemid=2

 

It would be interesting to know how they get away with selling 'replicas' on eBay. I've attempted to do it in the past and been busted every time. Which is a shame, because I really want to lighten my collection a little bit.

Link to comment
Share on other sites

It would be interesting to know how they get away with selling 'replicas' on eBay. I've attempted to do it in the past and been busted every time. Which is a shame, because I really want to lighten my collection a little bit.

The one's he had on eBay did not have brands on the headstocks. Those auctions only led me to his website. I have not purchased from him yet but conversations via email were great. He has some nice pieces.

Link to comment
Share on other sites

$400?

Not too bad I suppose.

I got both my Les Paul's at $200 delivered if I remember right

From China? If so killer deal. Shipping would have been expensive. I think the one I was looking at was more expensive due to the double neck and additional shipping costs.

Link to comment
Share on other sites

Replica guitars are generally bad.

After you upgrade all parts to be quality parts, you 're still playing a guitar with bad wood, and questionable playability, and you have payed as much as a used origial.

I say stay away, if you like playing.

Link to comment
Share on other sites

  • 6 months later...

Copy paste of my answer from different topic about replica guitars:

 

 

I have 6 guitars 3 of them  are self build, two of them are re-made of Gibson rep, I hate rep guitars thats why there is no Gibson sign on headstock.  Just some nice looking  x unknown brand name. But from same factory as yellow Gibbys are made. No point to buy them, unless you can  do a lot by yourself.

Pimped rep LP price can go up for 600-700 usd and for that price you will get new low end Gibson LP from Thoman or elsewhere or used gen  or Lawsuit made in Japan...

 

Let me start with "problems".... by first look they all look more or less good, reality is that all is needed to change. I did it becouse I like  work with wood/ guitars and I did want to see how good they can be. All done, they are pretty good.

Ok, here we go, it is basically  all about rep guitars not only about rep LP :

 

- Headstock tuners holes are no good- to big or too small. Tuners are 99,9% crap, even if the stay tuned, they look like sh@£it.

- Trussrod usually can be adjusted but it is  often too short ,99%  of reps probably have this flaw, difficult or sometimes very difficult to adjust tryussrod. Usually they will have a trussrod what can be adjusted, sometimes trussrod is glued in... then you will have a problem...

-Nut is plastic, not good by sound vise or by look, it is deffinitely needed to change

-Frets levelling is needed 90% done if talking about rep guitars, sometimes frets are wider that fingerboard, you will hurt your fingers

-Fretboard insert`s are not made of abalone or mother of pearl, chap plasic- however palstic looks also quite ok also sometimes....

- Neck are made of 2 or mostly of 3 pieces- IMHO that not "all bad" thing, if from one pieces made neck, then you would have same problem as original, neck will be broken sooner or later. But by visually and cosmetically they are not good, if dark paint, then probably ok.

- Finishing... body and neck-headstock, needs to be sanded and re polished, then probably ok, from factory...no good. From distance ok, close look, lot of flaws.

- Sometimes neck and body joint is no good, lot of them have neck not parallel to body level.. Neck joint is same as Epi will have, usually same construction

-  Sometimes  frets  are not in right places on fingerboard, not possible to tune, my two yellow LP`s does not have this but I have heard  that it is also a common problem.

- Cavities are very badly done, I just shielded my guitar`s cavities becouse it will look better after that not that this was needed...

-All and I mean ALL hardware needed to be changed, sometimes pickups are ok, if you play hardcore metal with uber  high cain distortened amp pedal, but normally they are crap and very michrophonic-so they will screm and hoot.

- I you like to add HQ hardware you have to re drill all holes, switch hole, pots holes....+ made switch hole wall thinner for switchcraft switch, pots are usually some low end chinease crap mini pots- however they will work, wiring is total BS- will work  somhow but wire is low end,  soldering is no good, almost always there is some stange noise.. bad soldering-double grounding -ground loops.

- Bridge is too  far away from bridge pickup( or bridge pickup is too close to neck picukup- take as you like), you cant use without modification original pickguard, by look placing  it is different than original. Bridge post are fat, not  slim as US G LP, you can use adapters, but they still look fake.

- And body... usualy made of 3 or 4 or 6 or... pieces... you will probably have picture by now what they really  are. If you will have body of two pieces thats good, if on piece thats good.  But 3 ot 4 or... no. Usually wood is not best quality,  backside and upper side are covered with thin vineer... and sometimes all is covered with vineer- side areas  also, you cant understand what is under vineer or how many pieces is made making guitar body.. Belive me, there is nothing HQ there...

- Cavities covers are differently sized as gen, not possible to us gen covers.

- Finishing, paint or whatever it  is is very thick... and very plastic like, it will not age like gen guitars... hard to relic or polish  it also.

- Some minor thing more-no good trussrod cover by look or by size, some minor cracs and non matching filler is used etc etc...

 

- +Bindings are usually quite HQ

 

... what I like...

 

+I can all do as I want, I will choose hardware, pickups, wiring( I will use 50 wiring if LP).

+Wood by sound wise is good for guitar. Not "table wood"

+Usually if noted that neck and body is mahagony, they are mahagony, by grain not same as US LP mahagony, but still some Honduras or China or some different mahagony.

 +-Upper layer is usually never thick maple...it is veneer..  but again, I dont see a problem, some custom shop gen G LP s are made also as all mahagony... so for me this is not a problem usually.

+The look by size and shape quite same as gen-main reason why I  did that work... I like LP shape not that "Gibson" name

+Fingerboard are mado of rosewood usually

 

You cant compare rep watch and rep guitars... guitars are waist of money has thay are from facory.. needed to do a lot of modifications. The are like low end canal street watches.... waist of money.

 

Better option is to us HQ guitar KIT and make all  from start...

Edited by sul
Link to comment
Share on other sites

  • 4 weeks later...
  • 4 months later...
  • 3 years later...
No answer but I found what I needed! I think I'll try one out. I know I'll have to step up and spend some money but heck! We do it with rep watches all the time!!!
Where can you find Rep Guitars? I'd be interested to check them out!

Sent from my ONEPLUS A5010 using Tapatalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up