positivitony Posted July 31, 2014 Report Share Posted July 31, 2014 So I finally settled on a couple reps I'm going to buy. One of them is a Richard Mille RM011, and I'm going to modify the daylight out of it. I want an RG case model, but I HATE gold plating. I've always had terrible luck with gold plated jewelry. Could I bring the watch to a jeweler and have them build me a case from real 18K RG? Is that possible? I'm sure if it is, it'll cost an arm and a leg, but I'm prepared for that. Does anyone know if it's actually possible? Link to comment Share on other sites More sharing options...
Ezio Posted July 31, 2014 Report Share Posted July 31, 2014 Im gonna teach a life lesson everything is possible as long as the Price is right and you have enough money but this i dont Think so no watchsmith is gonna do that you might need to find a jeweller if it is Link to comment Share on other sites More sharing options...
jdkno Posted July 31, 2014 Report Share Posted July 31, 2014 Well sorry to have to play the Devils advocate here but I would imagine the cost of having a case made out of real rose gold would probably cost more than buying the gen. Link to comment Share on other sites More sharing options...
maevit4996 Posted July 31, 2014 Report Share Posted July 31, 2014 That's quite ambitious mate. I'd worry about the other tells first on the RM011. Date wheel font is a big one and since its a skeleton dial, you can't really replicate an RM movement. I know it's your taste, but with your willingness to spend a lot of money, I personally would build a vintage Rolex like a v72 powered 6263. Link to comment Share on other sites More sharing options...
Legend Posted July 31, 2014 Report Share Posted July 31, 2014 So I finally settled on a couple reps I'm going to buy. One of them is a Richard Mille RM011, and I'm going to modify the daylight out of it. I want an RG case model, but I HATE gold plating. I've always had terrible luck with gold plated jewelry. Could I bring the watch to a jeweler and have them build me a case from real 18K RG? Is that possible? I'm sure if it is, it'll cost an arm and a leg, but I'm prepared for that. Does anyone know if it's actually possible? Considering all aspects of your statement, I would say that it is not a cost efficient project for many reasons. a. The RG case cost would easily buy you a nice mid to high level gen watch. With the costs of customisation, design, and of course material, you might wish to rethink this. b. You need a date overlay for the watch to look accurate for casual visual inspection. Frankly, skeleton dials have the advantage of looking messy and complicated, so unless a side by side scrutiny is done, one skeleton dial is as good as another if you do not know the intricate details. My point is: the rep dial is good enough. c. I have zero knowledge on the RM movement, but I think you are someone who likes the looks of the RM watch on the wrist, rather than the engineering. So in this case, the rep movement could serve. Looking at the 3 points raised above, why not spend effort to solve the most obvious tell, the datewheel font? Cost wise, this would be an infinitesimal percentage of customizing a real RG case for the watch? Link to comment Share on other sites More sharing options...
GenTLe Posted July 31, 2014 Report Share Posted July 31, 2014 So I finally settled on a couple reps I'm going to buy. One of them is a Richard Mille RM011, and I'm going to modify the daylight out of it. I want an RG case model, but I HATE gold plating. I've always had terrible luck with gold plated jewelry. Could I bring the watch to a jeweler and have them build me a case from real 18K RG? Is that possible? I'm sure if it is, it'll cost an arm and a leg, but I'm prepared for that. Does anyone know if it's actually possible? Providing you'll find someone able and with the willing to do that, it will still be a highly expensive REP. With such amount you can go for a gen Ap or Hublot or Rolex, full gold. Why don't you just try a rg rep around 350$ and see how you feel with that and THEN decide with some more knowledge? Link to comment Share on other sites More sharing options...
Tonyyammine Posted August 1, 2014 Report Share Posted August 1, 2014 So I finally settled on a couple reps I'm going to buy. One of them is a Richard Mille RM011, and I'm going to modify the daylight out of it. I want an RG case model, but I HATE gold plating. I've always had terrible luck with gold plated jewelry. Could I bring the watch to a jeweler and have them build me a case from real 18K RG? Is that possible? I'm sure if it is, it'll cost an arm and a leg, but I'm prepared for that. Does anyone know if it's actually possible?If your able to get a jeweler to make u a one of a kind case your able to buy a used gen one. Think about it. Here is some study material for u type in richard mille maybe u can buy one in an upcoming auction. http://catalog.antiquorum.com/catalog.html Link to comment Share on other sites More sharing options...
positivitony Posted August 1, 2014 Author Report Share Posted August 1, 2014 This is all really good insight guys. Thank you! I asked a couple jewelers today and let's just say I'm just gonna have to stick with a plated one for now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now