pam007 Posted February 1, 2016 Report Share Posted February 1, 2016 Anyone know where one might acquire the best aftermarket 6536-1 / 5508 Small Crown Bezel ? Thanks Link to comment Share on other sites More sharing options...
alligoat Posted February 1, 2016 Report Share Posted February 1, 2016 http://www.ebay.com/itm/QUALITY-MADE-COMPLETE-BEZEL-SET-REPLACEMENT-VINTAGE-SUB-REF-7016-9411-/171044673988?hash=item27d30e99c4:m:mdeTbYtYDPbLyJFrzh06yWg this is the closest I could get- I call this person 'son of Phong'- you might see if he can get you a bezel for the 6536/5508. Or you could try Phong... My 5508 from NDT 8 years ago has the paper clip bezel- a crystal retention ring and the brass alloy bezel with the 8 sided wire in the bezel. Link to comment Share on other sites More sharing options...
pam007 Posted February 1, 2016 Author Report Share Posted February 1, 2016 Thanks Alligoat. I'll send him an email. Cheers Link to comment Share on other sites More sharing options...
JoeyB Posted February 2, 2016 Report Share Posted February 2, 2016 I think the 6536-1/5508 uses a coin edge bezel. 1st pic is a gen. 2nd pic is my 6204. 3rd pic is the new bezel. 4th is JMB's great work. I used my 6542 bezel on my 6204 build. The GMT coin edge bezel differs from the Sub coin edge bezel by having the lower part of the coin edge, where it sits on the case, tapered or stepped in. Untouched, mine are made with that taper. My bezels are made of brass and lightly nickel plated. I used a bit of elbow grease and a scotchpad to take down the plating to expose the brass for an aged look. That flattened, or at least reduced the step to a more Sub look. Obviously it can be taken down further that I did. This is a clip on, gen styled bezel, with spring and retainer. The inside diameter of the stainless steel retainer is 30.226mm. You might need to make it bigger to work. I don't know if this will help, but it's a thought. Also, our own JMB did my case engraving. Link to comment Share on other sites More sharing options...
Nanuq Posted February 2, 2016 Report Share Posted February 2, 2016 These are the profile you're looking for. Phong makes the best for a 6538, with MQ right behind him, so those are good starting points for a 6536/1 too. Be sure the bezel is for a 6536/1 or 5508, as the 6536 is a rare beast and takes a different crystal and bezel. Link to comment Share on other sites More sharing options...
JoeyB Posted February 2, 2016 Report Share Posted February 2, 2016 That looks like it has the step or bevel on the lower part. I assume it is genuine. I wonder if Rolex used several suppliers as they did with the inserts, and they vary. Link to comment Share on other sites More sharing options...
Nanuq Posted February 2, 2016 Report Share Posted February 2, 2016 Yes both are stepped in on the underside, to clear the crown when it's screwed down. Here are some closeups to show how close it fits: Link to comment Share on other sites More sharing options...
freddy333 Posted February 2, 2016 Report Share Posted February 2, 2016 Adding to Nanuq's comments................gen bezel & crown from different angles - Link to comment Share on other sites More sharing options...
pam007 Posted February 2, 2016 Author Report Share Posted February 2, 2016 Thank you everyone for your help. There seems to be some inconsistencies with how wide the teeth are. Anyone know why this is the case? Nanuqs Bezel Vs Freddy's Bezel.. the teeth size is different. I found this Gen Bezel for a 5508 6536/1 and it looks like the teeth spacing is like yours Nanuq The 6538 just seems taller / Deeper to compensate for the taller crystal. Link to comment Share on other sites More sharing options...
freddy333 Posted February 2, 2016 Report Share Posted February 2, 2016 There were at least 3 different versions of those early Sub bezels (that I am aware of). If you search the gen sites, you will see. This was typical of Rolex sport watches in the 50s. My guess is Rolex either changed the design as production ran or the bezels were sourced from different suppliers, but that is only a guess. 1 Link to comment Share on other sites More sharing options...
Nanuq Posted February 2, 2016 Report Share Posted February 2, 2016 What he said ^^^ With different suppliers you're bound to get the same kind of variances as we see in inserts too. Link to comment Share on other sites More sharing options...
JoeyB Posted February 2, 2016 Report Share Posted February 2, 2016 Is it my tired, old eyes, or does my bezel come very close to the look of yours? It looks to me that with a bit of modifying could be on target. Link to comment Share on other sites More sharing options...
cc33 Posted February 3, 2016 Report Share Posted February 3, 2016 Freddy, isn't that a tog bezel? They had thicker coin edges.. The 6536, 6204/5 and 5508 bezels had thin coin edges like on Nanuq's gen. Ask phong if he has the shorter ones (shorter then his 6538 version) if not ask Minh the same question, a 6538 bezel will look out of place and theres no way to shorten them at all. Just had a look to refresh and the tog bezels were the same except for the size (smaller) I guess yours is a rare version with 'thick teeth", most I've seen have the thinner ones. Link to comment Share on other sites More sharing options...
nick1972 Posted February 3, 2016 Report Share Posted February 3, 2016 TOG bezels are alot shorter in diameter! Sorry Freddy, that bezel is no good! Link to comment Share on other sites More sharing options...
freddy333 Posted February 4, 2016 Report Share Posted February 4, 2016 7 hours ago, cc33 said: Freddy, isn't that a tog bezel? They had thicker coin edges.. The 6536, 6204/5 and 5508 bezels had thin coin edges like on Nanuq's gen. Ask phong if he has the shorter ones (shorter then his 6538 version) if not ask Minh the same question, a 6538 bezel will look out of place and theres no way to shorten them at all. Just had a look to refresh and the tog bezels were the same except for the size (smaller) I guess yours is a rare version with 'thick teeth", most I've seen have the thinner ones. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now